Bending Acoustic Guitar Sides | Using my Homemade Side Bender
Vložit
- čas přidán 27. 08. 2024
- In this episode of acoustic guitar build #2, I'll be bending the Ambrosia Maple sides. I'll also be making a template for the sides, and gluing the neck and tail blocks in place. Then I'll begin to radius the sides and practice my bus driving. The side bender worked awesome.
See how I made my side bender - • Building my Acoustic G...
Check out Waldrop Guitars - waldropguitars...
-- Affiliate Links to Products Used --
Titebond Original Glue - amzn.to/45r0QLy
Quick Grip Clamps - amzn.to/44hqCki
-- Visit My Website--
www.homebuiltw...
-- Check Out My Handmade Guitars --
www.hayleyguit...
-- Save 10% and get some awesome CA Glue from Starbond --
bit.ly/2WJmxbL
-- Ways To Support HBW --
www.homebuiltw...
-- My TeeSpring Store --
teespring.com/...
-- Check out my Amazon Shop --
www.amazon.com...
-- Join the HBW Built not Bought Facebook Group --
groups/homebuiltworkshop/
-----Connect on Social Media-----
/ homebuiltshop
/ homebuiltshop
/ homebuiltshop
/ homebuiltshop
----- My Mailing Address -----
Home Built Workshop LLC
P.O. Box 84
Peyton, CO 80831
Please remember when using tools of any type, there is the potential for injury. You are responsible for your own safety. Make sure you know how to use your tools properly, work at your own risk, be safe, wear your safety gear, and most of all, have fun!
#buildinganacousticguitar #guitarbuilding #homebuiltworkshop
Thank you Jeff.
This is some of the coolest shit I have ever seen on CZcams.
Glad you feel better. I just watched your making the side bending jig video within the last 24 hours. I'm glad to see it worked out as you planned. Looking forward to future videos.
Thank you. I'm super happy with the side bender. I just need to remember to hook the springs in the correct spot. Lol.
Hello, thank you for the amazing and educative content in your videos. I have a really small workshop down here in Uganda and I dont have machines to build perfect moulds and bending jigs. Is it possible to purchase some of these already made from you. Thank you
Nice work man. Glad the bender you made worked out! Bending the sides is nerveracking. When you take it out of the foil and don’t see cracks is a great feeling, though!
Its a very good feeling.
I've seen numerous videos on side bending but they never get around to showing how they make sure they have the waist lined up properly.
Thanks for the shoutout. You're welcome.
Any time man.
not sure how important it is to stay centered when driving the bus, but you could consider adding a hole/center and an additional brace through the center, and then use a threaded insert as a pivot point? again may not be worth the squeeze but could add to your alignment enhancements.
Excellent video Jeff! Do you have a video that shows how you built the side press?
Thanks. I do have a video of building the bender. czcams.com/video/NEpbQXQ10x4/video.html
Do you have plans for the bending mold? Thx
Hi. Have you seen the plans at Genone-luthier-supply to build your own side bender.
I have seen them but decided to build my own bender. czcams.com/video/NEpbQXQ10x4/video.html