Setup L2TP VPN server on a Mikrotik CHR VPS

To set up an L2TP server on a Mikrotik CHR VPS, follow these steps:
1. Log in to the Mikrotik CHR VPS via the Winbox utility.
2. In the Winbox menu, go to the PPP section and click on the L2TP Server option.
3. In the L2TP Server configuration window, click the Add New button to create a new L2TP server instance.
4. In the L2TP Server instance configuration window, enter a name for the server instance in the Name field and specify the IP address range that will be used for L2TP client connections in the Address Pool field.
5. Under the Security tab, enable the Use Encryption option and specify the encryption parameters that will be used for L2TP client connections.
6. Under the Users tab, add the L2TP user accounts that will be used to connect to the server.
7. Click the Apply and OK buttons to save the L2TP server configuration.
8. In the PPP menu, click on the Interface option and then click the Add New button to create a new PPP interface.
9. In the PPP interface configuration window, select L2TP Client from the Type drop-down menu and select the L2TP server instance that was created in step 4 from the Server drop-down menu.
10. Enter the L2TP user credentials in the User and Password fields and specify the desired IP address for the PPP interface in the Local Address field.
11. Click the Apply and OK buttons to save the PPP interface configuration.
12. The L2TP server should now be ready to accept client connections. To connect to the server using an L2TP client, enter the L2TP server's IP address, the user's credentials, and the desired local IP address in the client's configuration settings.
#vpnremote #vpnserver #l2tp #mikrotikchr #youshe

[@ndeboland]

Bang kalo misalkan l2tp client di microtiknya Ndak mau running biasanya kenapa ya .. sudah direstart kedua microtik masih Ndak running juga

[@dukun_Channel]

Lanjutkan min

[@youshe]

Siap kak

[@RiswanBerutu]

Sudah 4 kali saya ulangi settingan di vps chr, pas test di lokal gak juga mau konek, newbie kuadrat

[@arikpriharsono3126]

Saya ping dengan windows , hasilnya oke , paakai mikrotik timeout , setelah di traceroute di mikrotik ip nya terblokir di singapore . Dial pake windows mau , pakai mikrotik ga mau wkwkk

[@drakknight5273]

Bang,, saya pake mikrotik 6.5 winbox jg 6.5 kok di l2tp server nya gaada ipsec ya?

[@youshe]

Jika tidak ada, untuk ipsec di chr tidak perlu diaktifkan kak.. Jadi yang local nanti tidak perlu pale ipsec

[@bangkawarahFC]

remot client sering dc sendiri dan bengong itu karena apa ya? apakah koneksi di klien tidak stabil bang?

[@iwanhermawan3032]

kasus sama

[@avatarraang3842]

vps beli dimana..?

[@youshe]

Idcloud kak