Eccentric Turning
Vložit
- čas přidán 14. 09. 2020
- The complete process of eccentric turning is demonstrated by Mr. G. J. Panchal at the workshop facility of S. V. National Institute of Technology, Surat.
#SVNIT
#Manufacturing
#Turning - Věda a technologie
Very help full Thank you sir
G'day and greetings from Tasmania Australia 🇦🇺 I have two eccentrics to machine for a large mill engine you have really helped me in the setting up and showing how to machine this part . Thank you it's made me more confident in giving it a go. Thank you John
First of all a honest video!
Cool video, very helpful for my project!!
Use the 3 jaw chuck with a shim in one jaw as thick as the eccentricity
Nice sir I liked
Skip to 14:44 for teacher crashes toolpost into the chuck. I'm familiar with that sound having done this myself. ;)
Hahahahahahaha
Thank you sir.
👍👍👍
Hanzhen harmonic gear , strain wave reducer, robot arm gear , over 30 years experience
ऐसी ही जॉब क डबल सेंटर दोनों ही दिखना चाहिए ,,,बताए sir जी,,,थैंक्यू sir
now I make roll sizer die.
You know you can do that with a four-jaw chuck and a hell of a lot less work than you're doing marking things. You just have to be real good at using an indicator and then you don't have to do so much scribing.
This is practical lecture in the college
Yes but that would be _cheating!1_
Por razones de seguridad NUNCA operaría esa máquina con reloj ni con pulsera.
Blueprint called for eccentric to be 14mm diameter, at the end he had a 15 mm diameter.
Nothing was to any dimensions as called out in the blueprint... FAIL...