BROKEN CROSSING GATE!! and several trains are coming!!!!!
Vložit
- čas přidán 19. 10. 2019
- We caught this broken crossing gate on Ridgeview Drive in Warrensburg, MO with several trains coming!
Grade crossing signals are warning devices that are used at railroad grade crossings to alert drivers and pedestrians of an approaching train. These signals are designed to help ensure the safety of both trains and the public at grade crossings.
Grade crossing signals typically include:
Lights: These are typically red in color and are used to indicate that a train is approaching or that the crossing is active.
Bells: These are used to produce a loud, distinctive sound that can be heard by drivers and pedestrians.
Gates: These are typically used to provide a barrier across the roadway when a train is approaching.
The signals are typically activated by the train's approach and will continue to operate until the train has passed the crossing. They are usually controlled by a crossing controller, which receives input from track-side sensors that detect the approach of a train. - Auta a dopravní prostředky
A week after this was filmed the broken gate had been fixed by crews and is working properly again
Mind telling which railroad operates the line? Some commenter is claiming to be working for csx and I think we all know he is lieing as Union Pacific and Amtrak works that line.
Union Pacific railroad
@@trainworldstudio7185 thank you
Hopefully this won't happen again with the gate
Yikes, a little slow in Missouri.
0:06 LED Crossing light tried to escape from the train by slamming on the street
4:14 LED Crossing light was slain by Crossing Gate
6:01 LED crossing light fell from a high place
It's just beeting it's gate, it's a teenage crossing signal and it comes naturally.
Yaeh. Those Teenage crossings man.
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
@@RailsOfTheMidwest Wait What
Wtf? You’re so wrong, railroad crossings are machines. Not humanoids.
@@bnsfrailfan mans needs to learn to take a joke-
0:09 I'm awake now! Lol
0:09 this is so fast barrier and its fatsern like sword
4:14 Woah, it hit the ground hard
And the guy that just went over the tracks got lucky. A second or so earlier, and he would have wiped that gate out, along with a scratch or two on his car, for sure!
if you look closely at the end of the gate you will see one of the lights on the gate broke off.
I believe that in this case the motor inside the gearbox has failed (bad windings or short circuit). The reason because the gate drops so violently is because the closing procedures call for 3 steps: in the first one the hold-clear device is no longer fed with current, so it is able to release the gate, in the second one the gate drops by gravity and in the last one, approx. after 45° the motor helps the gate to soft-land into 90° position by acting as an engine-brake. When the "up" command is received, the motor is powered up, the gate begins to rise and, when in 0° position the hold-clear device is fed again with current and the motor is disconnected, keeping the gates in the resting position as a new cycle takes over.
There is another video on youtube showing approximately the same thing where the only differences are the gate impact on concrete, and the fact that the gates rise normally at the end of the cycle. In this case, since the gates just drop, but don't move anymore, I suspect the motor is no longer operative and needs replacement.
Or maybe the lower speed reducer and snub are broken and need replacing
Visually it looks like the normally functioning gate never free-falls, so I think these gates are being slowed with dynamic braking by the motor the entire time (or at least it kicks on at an early angle like 70 degrees).
@@kdmq they are and your supposition about the motor kicking on at an early angle is correct. But the broken gate here has a faulty motor with shorted or bad windings or at least there is some kind of interruption in the circuit that never feeds current to the motor so that when the hold-clear device is de-energised effectively unlocking the gate, the engine is not acting as a break and the whole gate smashes into the ground, because it goes down only by gravity. And when the train has gone, the faulty engine/circuit is unable to lift the gate, that stays permanently horizontal.
I think the limit switch and motor needs replacing
Aas❤❤❤heart is ❤😂🎉😢😮😊
4:14 Light breaks off gate
Replace it. *THE WHOLE DAMN THING*
6:02 Broken light is crushed by the crossing gate
Hello! I work for CSX unfortunately this whole crossing gate mechanism and barrier will be replaced
6:03
poor gate light, what did it do?
Play it back .25 speed
@@Hayden_the_Dergthis isn’t even owned by CSX it’s UP, that’s how we know your lying
I don’t like it when Amtrak and freight trains go on the same track
6:02 Poor gate light :(
The broken gate can be easily pushed back up by a person. However, that won't fix the root problem of the lowering and raising mechanism being broken.
4:49 crossing gate L.E.D upside down is broken
4:14 The light at the end of the gate breaks off
6:03 the broken light is crushed by the gate
Damn that thing hit the ground real hard
I was gonna say that, but then I was scrolling down in the comments and saw this
yall its a odd malfunction
.R.I.P. the light on the end of the gate:(
Rip
Rip
Somebody,needs to come out, & repair that crossing gate !!!!
The other gate: *WTF are you doin man?!?!*
Rebel Gate: *Resigning From My Job*
@@LightningTheLMS3FJinty2020 Seems about right
Hello, dear friend very nice upload. Have a nice day!!!
4:14 boom lights broken
One light fell off, but, they still work.
I work for CSX, this will get fixed eventually.
@@Hayden_the_Derg but UP owns the line..
@@kansasstatealerting2874he is a impersonator. A true csx worker would not say such ludacris things.
@@Hayden_the_Dergliar. UP owns the line not csx. So stop lieing >:(
No, the gate just wanna chop the cars that wanna beat it
0:06 I think the crossing is on drugs
Me too lol
Hello! I work for CSX, as this comment maybe funny, it clearly isn’t, it’s just in bad shape the whole clearance needs a tune up, hopefully this comment helped!
highway
@@tkprod19I agree. He said csx will fix it. Lies. Only union pacific can do that since they own the tracks going through there.
@@Hayden_the_Derg you don't work for csx. You know why? You said csx will fix it. Lies. Only union pacific can since they own the tracks going through that town. So yeah you caught yourself in a lie 😂
RIP LIGHT
Wonder what caused that gate to come crashing like That? I'm just glad nobody was parked underneath that gate when it came down. I'm sure that would leave a big damage. Also rip wch mechanical bell. Sounds like it's about dead
I've heard what causes gates to slam like that is a bad gate mech. Those make the gate go up or down more safely. My guess is either that or the gates just sick of going up and down so much so it's like "ugghh FINE."
Good video!
F##kin broken! 6:03
6:01
*YOOOOOOOOOOOOU'RE HEEEEEEEEEEEEEERE*
*THERE'S NOOOOOOOOOOOOOOTHING I FEAR*
*AND I KNOOOOOOOOOOOW THAT MY HEART WILL GO OOOOOOOOOOOOOON*
GATE BROKEN GROUND TOO FAST.
GATE BROKEN GOING UP DIDN'T UP.
THIS SO LIGHT BROKEN RED. OMG. ONLY CALL POLICE CEK THIS GATE CROSSING THIS ONE
That train comes and the gate start go so fast
Railroad Crossing: I am going to jump!WEEEEEEEEEEEEEEE!
4:09 if you knew it was gonna do it again why didn’t you keep your camera pointed at it? Why did you pan over to the train right when it was about to do it?
wow, broken gate, ive never seen that lol
There rare
@@BunnyCatV1 Could be, but those motors are heavy components. I more suspect the contacts that suppose to brake the gate's descent are open while they should have been closed. Braking is done on the motor and usually also works without power (the motor is switched as a generator and some types of gate mechanisms even short the motor completely when the gate comes close to full horizontal state.
It the motor broke, I don't understand how the gate apparently made it's way back up again.
Eääääääööööööüüüüüüü
Cuäntö bäcönes tiene sön 999 eääääääääööööööööüüüüüüü
@@weeardguy I was watching the third train passing by slowly at first and saw the defective arm going back up by itself, but when it came down, it dropped rapidly and smashed hard into the pavement. I'm surprised it didn't break part of the arm off.
it is just beeting it's gate, it's a teenage crossing signal and it comes naturally.
Man I hope they get that gated Crossing signal fixed or replaced the second time it went down hard the light busted against the asphalt and broke
In Russia, this is considered quite normal.
It's the Gremlins, they are everywhere!
How the heck did the crossing turn off.
6:02 Gate mechanism:”I’m better than u light” light: “no I’m no- “smash! Gate:”that’s wat u get stupid “slams” again”
SorryIBrokeIt.PleaseWait.
rip light
@@kianthetrainspotter7777 lal
Yup that pretty much sums that up
4:14 OH GOD THAT'S DANGEROUS! Yeah they'll need someone to fix that Arm it just Slammed into the Ground and Broke the Lights on the end there!
Nice! Rip gate. Also if you noticed, one of the Gate Lights got busted
Wait! 2 gate lights is busted?
@@RandomnessKevin the light at the end of the gate that's dropping hard.
@@johndeerefan725 oh
@@johndeerefan725it must hit the pavement.
That was a Free Fall Crossing Gate but it shouldn’t do that really Fast cause Vehicles can get smashed Really Hard & it could Hurt You.
I bet it has been reported a lot
0:09 oof
Bad Gate mechanism screaming out means that something inside the mechanism itself has gone bad wondering if they have replaced it yet
Yeah I think so too
I think it is a broken limit switch on the bottom that tells it to stop the motor when it is down.
You are incorrect.
Great Video! Is this Ridgeview Ave in Warrensburg MO?
Yes. I looked it up on Google and it is the very same.
it was having a tatrum
Does that boom gate at the start have a snub or not?
That had some Maximum Energy Drink!
🎵Now from the top, make it drop…🎵
The train tracks guards can be broken if you drive through them. It will damage your car but better than totaling it.
In this case the motor in the mechanism has failed (bad winding or short Circuit or limit switch failures) that will release the gate in 3 seconds the gate that’s why it keeps dropping and hits the ground so it’s need repairing
Looks like that gate needs repairing by the way it swings like that
They need to replace that WCH gate mechanism too
The crossing gate is not supposed to come down that hard.
How are gang members such professional artists with spray paint?!
That gate must be drunk
When the WCH 3590 takes steroids
Talk about a railroad crossing with anger😂
why is one of the gate lights at the end of it hanging off
The crossing gate has mad when closing
The gate light broke and it’s on the ground. Someone should fix that gate light
Probably a dirty gate motor armature or contacts need adjustment.
Crazy video that had hurt love train horn
How long it take for RR together out there once reported?
CAN YOU PLEASE WATCH THIS VIDEO CAN YOU ALSO SHOW THIS VIDEO TO MOM AND THE YELLOW LAB OLLIE
One gate light is broken
BROKEN RAILOAD CROSSING!!!
4:14 it hit the ground hard that the trestle shaked
I never see a railroad crossing touch the ground
The gate make a Pyle sound when it hit the ground
Me smashing my TV
No Way It Should Go Down Normally. It Should Go Down Gently. I've Never Seen A Gate Go Down Like That Before. I Mean Like It Should Go Down Just Normal. How Did It Do That It's Been Down For Hours ! ! !
Gate hit the ground like spring.
When it smacked the road the gate light broke
Same i have never seen that🤔😲😲
gate: hmmm is the cement hard- gate: yup- cement: haha noob
Bad gate mechanism will cause it to drop fast and raise slowly equal bad gate mechanism
I hope they fixed the crossing cause that was ridiculous I get it signals malfunction but I've never seen one malfunction like that.😂😂😂😂😂
That mechanical bell is dying
Good electronic bells need to take over this crossing
the brakes for the gate seem broken also the moter must be weak
That gate's just decided it ain't gonna take s**t from anybody no more. 😁 I presume you called the railroad phone number on the little blue sign to report the malfunction and that's why the train at 8:10 reduced speed to a crawl?
Bad magnet? Explains not gently lowering the gate and also not enough juice to raise it immediately after the train clears.........?
Where is this crossing?
Ridgeview Drive in Warrensburg, MO.
The left gate works but the right one no
what state is it
6:03 Red broke R.I.P
(0:04) Union Pacific train (1). (3:54) Amtrak Midwest train. (5:58) Union Pacific train (2).
By design, these gates are supposed to catch people's attention by flailing the arms about. And if your paying attention, they will for sure know that it is an attention grabber when it gets called in and videos are made about it. It's foolproof! XD
Wow that gated signal needs to be fixed immediately at least the gate didn't break on the asphalt it hit it pretty hard though
it literally smashed one of the lights at the end of the gate
You hahaha
Did they fix the gate?
I think so. Since union pacific owns that line of track and that they go through Warrensburg, MO of which this railroad crossing is in that town; i am pretty sure they fixed it.
I hope they fix it the gate
Broken gate mechanism
POV Me when I wake up for school 0:06
That gate hit road while going down
Soooo who kept pushing the gate back up into place? And did the camera operator call the emergency number at the crossing to report the issue? Or just stand there and keep filming a broken crossing over and over?
@Train World Studio Hi! I am a technician for CSX, thanks for posting this video, I have informed personnel about this to see what can be done, it may seem that the mechanism needs repairs, hopefully this comment helped!
CSX doesn't have jurisdiction of this Crossing. It also has been fixed already.
This line isn’t even owned by CSX
Also you can get in legal trouble impersonating a csx worker. So good luck in jail if they ever catch you.
And whoever is thumbing up the faker my message to you is that you are gullible.
Also to the brainless people who gave the impersonator 4 likes I have three words for you: *SHAME ON YOU!!!*
esas plumas ferroviarias deberian arreglarlas bien
That railroad crossing gate free fall on the ground
r.i.p that motor