Replacing A Quarter Panel Skin The OEM Way!!| Full Process
Vložit
- čas přidán 26. 08. 2024
- Check out my shop for all toolslinktr.ee/AUTO...
2016 Toyota Corolla side swipe collision
I'll be repairing the left front door, replacing the left rear door with a used door, replacing the left rear quarter panel with OEM one, and repairing the rear bumper.
This is my process on how I tackle these jobs. The whole process is done following OEM procedures.
As an Amazon Associate, I earn a small commission from qualifying purchases. Some of the links are affiliate links and if you decide to buy the tools through them I earn a tiny commission. It costs you nothing but helps me big time.
4" Micro Grip Clampsamzn.to/4apC4hL
Astro Pneumatic DS1000 Pneumatic Door Skinning Toolamzn.to/3uuEoEg
Slapping Fileamzn.to/49vFKOu
Slide Hammeramzn.to/4bNL2q2
Wiggle Wireamzn.to/3TcR8ZV
7 Piece Dura Block Sanding Kit:amzn.to/48xvNj3
Steck Quarter Panel Puller 20022:amzn.to/48NjvCJ
Astro Pneumatic Tool 930 Mini Reciprocating Air Sawamzn.to/41SYQeq
Sunex SX8200 Surface Blaster Kit:amzn.to/48J7Swz
The MAXI - 220v:www.dentfix.co...
Evercoat Rage OPTEX Color Changing Filler:amzn.to/3OhiHhR
Evercoat 425 Metal Glaze Ultra 30oz:amzn.to/492KXg7
Canadian Tool and Supply 7-Inch Air Angle:amzn.to/3tJ2zOQ
Wurth 1/4" ANGLED 90 DEGREE DIE GRINDER:shop.wurth.ca/...
Mirka MR-6 Finishing Sander:amzn.to/3vrjje5
Body Line Tool:amzn.to/3tNoZP1
Martin 1024 9" Blade Surfacing Spoon:amzn.to/3SbJ8I5
Uni spotter 5500:www.toolsource...
3M Belt Sander:amzn.to/48qO4hI
Milwaukee M12 FUEL 3/8 Stubby Impact:amzn.to/3H9va2V
Thank you for watching! Comments welcome!
Product links in the description above☝Want to support the channel?
Shop Amazon with my affiliate link:amzn.to/3v3OOep
(it costs you nothing but helps me big time)
Don't know how I got here?... What a treat...man your good .. thanks for sharing 👌
thanks!
Thank you for a channel with good character I can share with my young family.
good skills bro :) Greetings from Poland
Hey, thanks! 👍
one of the best CZcams channel on how to attack these difficult repairs.Thanks for sharing
Happy to help!
I watch your video everyday , thank you
Glad you like them!
The best work I'ver seen. Nicely done 👏👏👍👍✔
Wow, thanks!
The best arrobody explanation on the internet. Nice work 🤝
Nice clean job 👍🏻
thanks!
You deliver pro work, thank you for sharing. a lot of body work shops can learn from this .
I appreciate that!
Doing my first quarter panel by myself today
Nice!! Hope it goes perfect for you!
I’m doing my first one right now too just finished welding today these videos were clutch, helped me feel more prepped 😅
@@jackievelazquez7835 Hell yea! That's what they're for!
Nice
Awesome video. Can I hire you for a project car I’m doing? I need new rear quarter panels added and then a full car repaint. Let me know where I can get in touch with you.
Hey!! Unfortunately I'm fully booked. I can definitely guide you in the right direction if you have any questions though! Direct message me on Instagram
My auction car came with about 12 inches of fender indentation. I used bondo glass and then I’ll use bondo to smooth the surface. Is this the correct way of doing it?
I’m asking because my rear fender have similar dent like this car
From bottom to 12 inches next to door.
Did it for the first time so please don’t get mad lol
Yes, it will work. If you can, try to minimize the dent by getting to the backside of the dent and pushing against it or get yourself some pdr glue or a uni spotter. The less bondo the better.
Here's a video with some tips
czcams.com/video/U3ufWqx3lbE/video.html
Won't the steel rust from underneath where it's been welded?
Yes. Cavity wax gets applied to the backside of the welds to protect them
Howmuch does it cost to get a job like this done?
About $7000-$8000
would of thought you'd prime first then seam seal
The seam sealers that I use can be applied over bare metal. You're right. Some seam sealer do need to be applied over primer
What is that tool that youre installing on the wheel studs @0:48?
@snoopy2468975 it's a universal wheel stand/hub stand. It's for access to the wheelhouse area while the car is still loaded on the suspension
@@AUTOBODYTECH thank you!!!
6:31 Can I get information on the clamp product next to the air saw in this scene?
These are the 4" micro grip MG2K. hope that helps.
what kind of spot welder is that?
Pro spot phs-101
@AUTOBODYTECH thanks man 👍
didnt sleave the rocker or c pillar. not an ICAR job.
OEM procedure didn't call for a sleeve on either the c-pillar or rocker on this brand/model vehicle. Thanks for watching!
@@AUTOBODYTECH bs...
run a sleeve when cutting through multiple panels
otherwise your all good
@@icarusdb58 wrong.
How much should all of this cost?
About $7000-$8000
How long would you say the process took??
Probably 20-25 hours of working time
Typically 2 to 3 days of work.
Does that include paint? Just curious, how much would a repair shop typically charge for a job like this? Many thanks.
@trship6274 with paint is probably 4 full days start to finish. I would say about $5000