@@rosaliedezainde8367 Actually it wasn't, got a 100% on it :) still ; I have STE and ST, my STE is at 60% and my ST is at 48% This counts in STE, which is sad :|
you can make it eve in a plastic cup so that it will produce a larger sound, specially the cone shape, the longer the cone shape, the larger the sound it will make. :-)
Cool now a person four year later has a question... how is the quality of this speaker ? I can't really understand or be reliable from a video about sound quality. So if I can hear your own opinion I would be glad
@@angktrl it's probably really really really shitty. Of course he probably had access to better materials than this. This is meant to be more of a science experiment rather than to make an actual speaker, it works tho which is honestly really cool. If you want a good speaker, chances are you can probably go to goodwill and find one
The exact number of turns is not very important. I did about 20-30. I've had the magnets that I used for a few years and can't remember exactly where I got them. They likely came out of something that I took apart. The polarity of the magnets does not matter. Thanks!
Hi, I made a very similar one but the sound is very low and after using an amplifier only the noise increased. The sound isn't audible from even a meter away. I have used 20 windings, and 3 neodymium magnets. Do you have any suggestions?
Indy IFA the wire you have to use is coated kinda like a regular wire with rubber/plastic on it, but instead of rubber/plastic it’s coated with a very thin layer of non conductive material, so when he burns the ends he’s taking off that coating so it’s conductive and he can make a connection.
The only reason that would not work well, if at all, is because the signal coming out of a phone is fairly weak. You need a strong signal for a crude speaker like this to produce sound. That is why I used a powerful stereo system amplifier.
A stronger magnet might help some. But, the best thing to do if you have a weak signal is make the speaker very small. For example, the 3.5mm jack from a phone is made for powering headphones which are small speakers. You need to amplify the signal from a phone if you want to use speakers bigger than headphones.
I think I'll do this and see if I can make a budget amp. Butchering the head of an old fender amp, gonna get that low budget, garbage tone I've always wanted 😂
i was wondering the same "can you use more magnets?" as far as i have seen its all ok if they are stacked on top of each other and if they are of course the same size as for the thickness of wire i think its 0.2mm (idk what gauge is that) i have seen 10 inch speakers using same 0.2mm wire, so i guess every speaker pretty much uses same vires, but you should watch out how much ohms does your speaker have before putting it into an amp. You should probably look towards 4ohms as most amps support it. But i couldn't find how can you calculate how much ohms will the vires have I hope i helped you
Bro el cobre adecuado lo sacas de un motor de reproductor dvd (traen en las bobinas dentro de los motores ) usas al menos uno de los imanes no hace falta tantos con uno es suficiente y el marco lo haces con carton o algun otro material que puedas darles detalles diminutos. luego el diafragma eso es lo interesante para eso usas film aluminio y haces un molde con alguna especie de porcelana o masilla para darle la forma de diafragma al film de aluminio con eso haces un driver de headphones eso si antes como dijo el amigo del anterior comentario controlas la cantidad de ohms deben ser aproximadamente 32 ohms saludos!
I just looked into it; there are at least two types of speakers that don't use magnets (plasma speakers and electrostatic speakers). The problem is they would be a lot heard to make by hand.
I just made one and hooked it to my home surround sound and it was clappin then my receiver shut off and wont turn back on:((( the speaker was clappin tho hella bass
thanks i choose this project in my study im working in but i still have a problem with link i linked with jack plug 3.5 but i dosen't work tell me pleaz the teatcher will give me a not about it and thanks
My 8 years old had made this following your instruction and it worked really well. Excellent instructions.
What instructions
Because of you, it's a project in our science class, to make a speaker, thanks alot..
@@rosaliedezainde8367 Actually it wasn't, got a 100% on it :) still ; I have STE and ST, my STE is at 60% and my ST is at 48%
This counts in STE, which is sad :|
Could have gotten my ST higher too to get my diploma
Because of him we can make a speaker for our band thanks to him alot
@@405zx You make a paper speaker for your band? 💀Crazy funny
@@littleguy3002 yep except we made it much bigger and made more and it works
Ahh so this is how those speakers in local stores are made
It's not the same that's not how they make them
@@isthisshadow4955 Ever heard of sarcasm??
😂
No bro you are not right it's made with a one circle magnet and copper he needs iron body
@@arpit267 sarcasm bro
You need to add in the theory behind what you are doing, either by speaking or captioning it out!
@Cody Weber you need a thin diaphragm and a spider too or the voice coil will jump whatever way it likes.
what is it? the therory of sound 💀💀
Will this work with your home-made radio?
Yep
😂😂😂😂
Yes
You need an amplifier first
@@CarsonSmith-eh1jb *homemade* amplifier
As a science teacher, I did this one in our science class. It was a big hit
Seeing it made makes it feel more like magic.
This is a ricers sound system lol XD
Q
you can make it eve in a plastic cup so that it will produce a larger sound, specially the cone shape, the longer the cone shape, the larger the sound it will make. :-)
Larger means? Deeper or richer or louder?
Well it really works for me, nice one. I made a bigger one using neodymium magnets.
Cool now a person four year later has a question... how is the quality of this speaker ? I can't really understand or be reliable from a video about sound quality. So if I can hear your own opinion I would be glad
@@angktrl it's probably really really really shitty. Of course he probably had access to better materials than this. This is meant to be more of a science experiment rather than to make an actual speaker, it works tho which is honestly really cool. If you want a good speaker, chances are you can probably go to goodwill and find one
Thank you.its working perfectly
Awesome! Thank you for this tutorial!
For people saying there is something wrong, you have to wrap the coil correctly you can't just slap it on an call it done
Awesome video. Some step by step instructions would be nice too. 😎👍
Hello! Can I measure the both speakers you made with a multimeter?
Does it matter how thick the wire is?
Wow.... that's so wondertful.
Creativ AND entertaining
How many turns of wire and where do you get the magnets from, and does it matter about the polarity of the magnets ? Great job by the way......
The exact number of turns is not very important. I did about 20-30. I've had the magnets that I used for a few years and can't remember exactly where I got them. They likely came out of something that I took apart. The polarity of the magnets does not matter. Thanks!
Thanks for the information, very useful....... Great video.....
@@OverEngineered you should have atleast 4ohms impedance of the coil for it to be safer with amplifier
@@OverEngineered does Square magnets do the same job? I have some strong square one that's why I am askin
@@angktrl yes i think
you are so genius!!!!!!!!!!!!!!!!!
Thanks I am also make this paper speaker 🔊💯
Who got asmr tingles from this
Like: yes
Comment: no
thats f***ing cool
pretty cool how all speakers are is magnets vibrating
Very cool!!!😀
awesome!
might need this for robot repairs
aka have wires goin to this if it works
bravo good job
Is this paper sticky note sized?
So I take it we're connecting some output wires from a sound source to the wires wires shown?
Liz Honeyman
replaced the speakers in my car with these, havent looked back
Please make tutorial how to make coil please !!!! Very nice tutorial!
Use a slow moving motor or a dc drill
@@abeginnerspov5968 i think the biggest concern here is the resistance the coil should be.
amazing! But how can you move the coil when it's contacting with the audio jack?
I don't understand the question.
you use the COIL with two electric cable but how to play music with 3.5mm audio wire?
Nguyễn Hiền do u mean like 3.5 mm jack to speaker? You just connect wire to wire
Buy/salvage a 3.5 mm jack socket and connect the outputting wire to the coil wire lol
can connect this diy speaker to ur diy radio ? It will be cool
THI IS THE BEST MAKE IT SPEAKERS
mst h bosssssss
What type of wire did you use??
copper
@@ataaslan5177 lmao
Just make the magnet moves freely back and forth so that it can vibrate and make sounds
Its the coil that has to go up and down:)
Man I wish my house wasn't normal and had arts and crafty shit lying around
uh buy that shit or ask?
WHY
how do you test it
day 9 of learning techniques and methods of living during a apocalypse
Hi,
I made a very similar one but the sound is very low and after using an amplifier only the noise increased. The sound isn't audible from even a meter away. I have used 20 windings, and 3 neodymium magnets. Do you have any suggestions?
ik i might be a bit late, but you’ll need many more windings than that, like 70, and you’re also gonna need more power
yeah its probably the power you need more of
@@lenechris65 ya think hes gonna need it 2 years later
Use hem for airpods
@@AGG-hd tf
Do you have to burn the end of the magnet wire for it to work?
Indy IFA the wire you have to use is coated kinda like a regular wire with rubber/plastic on it, but instead of rubber/plastic it’s coated with a very thin layer of non conductive material, so when he burns the ends he’s taking off that coating so it’s conductive and he can make a connection.
Can you calculate the impedance of this speaker?
Could I just cut the 3.5mm jack from broken headphones and connect it to the copper wire, then plug it into my phone?
The only reason that would not work well, if at all, is because the signal coming out of a phone is fairly weak. You need a strong signal for a crude speaker like this to produce sound. That is why I used a powerful stereo system amplifier.
Would you need a less stronger signal if you used more coils or a bigger magnet?
A stronger magnet might help some. But, the best thing to do if you have a weak signal is make the speaker very small. For example, the 3.5mm jack from a phone is made for powering headphones which are small speakers. You need to amplify the signal from a phone if you want to use speakers bigger than headphones.
Is the size in the video too big for a phone to power it?
Yes
How many rounds of copper did you took around that magnet ???..
nice
I think I'll do this and see if I can make a budget amp.
Butchering the head of an old fender amp, gonna get that low budget, garbage tone I've always wanted 😂
I have some questions.
1: does the gauge of ur wire matter? and what would you reconmmend
2: Can you having multiple magents to power speaker?
i was wondering the same "can you use more magnets?"
as far as i have seen its all ok if they are stacked on top of each other and if they are of course the same size
as for the thickness of wire i think its 0.2mm (idk what gauge is that)
i have seen 10 inch speakers using same 0.2mm wire, so i guess every speaker pretty much uses same vires, but you should watch out how much ohms does your speaker have before putting it into an amp. You should probably look towards 4ohms as most amps support it. But i couldn't find how can you calculate how much ohms will the vires have
I hope i helped you
Bro el cobre adecuado lo sacas de un motor de reproductor dvd (traen en las bobinas dentro de los motores ) usas al menos uno de los imanes no hace falta tantos con uno es suficiente y el marco lo haces con carton o algun otro material que puedas darles detalles diminutos. luego el diafragma eso es lo interesante para eso usas film aluminio y haces un molde con alguna especie de porcelana o masilla para darle la forma de diafragma al film de aluminio con eso haces un driver de headphones eso si antes como dijo el amigo del anterior comentario controlas la cantidad de ohms deben ser aproximadamente 32 ohms saludos!
Lmao I lost quite a few brain cells reading this comment section
those magnets, they are fragile like glass, don't make them pull towards each other from a distance, they can break easily
How can I fix my coil wire that is broke off at the speaker?
Soldering
Is that thing actually making the sound or is he playing an actual speaker in the background?
Can i so this with a plastic plate ? Are 4 neodym magnets good
Should work just fine.
Wow man
the sound quality left the chat 💀
The music test reminds me to How to Basic
I love you and your family
Super!
its copper wire or matal
will it work if the side is covered by holed plaatics?
+Willy Yulianto
Probably. Honestly, the speaker that I made in my other video works much better than this one and was easy to make.
Where can I buy those materials in a store?
Ha bro I can use shop magnet that look like circle .that OK for making speaker
can u do tht plzzz make itt
what kind of wire did you use?
Copper and isolated.
what kind of wire did he use?
copper and isolated
Ok thanks
you are cool
Nice
Redstone tutorial
what'd you use to connect copper wire to a device?
Audio cable or smth
I will use it as a siren
Can this handle really hard bass?
No. But with modifications, you might be able to make one that is good enough for music.
How do you know which copper end is negative and which is positive ???
Simple. If it smoke you got it wrong if not its right polarity. Just dont let your house burn down to ash 🤣😂
Its just copper man. Theres no negative and positive.
Which song u played with this speaker. Can u plz tell name
Darude sandstorm
Homemade na speakar ma sikka gevu shu chhe
how were the wires connected to the music source?
Through an audio cable
What does he link the wire to
The music source
can i use normal paper or do i have to use the paper shown in the video
U can use anything which vibrates easily
so funny
@@HimeshKundalYeah correct
Where does the sound come from?
I connected the homemade speaker to my amplifier. It is working just like any other speaker; the paper is vibrating which creates sound waves.
you could make the diaphragm out of baking paper witch is a lot thinner so the paper vibrates better
That would sound shit and what's a diaphram, you mean the cone
can u make any other speaker without magnet
I just looked into it; there are at least two types of speakers that don't use magnets (plasma speakers and electrostatic speakers). The problem is they would be a lot heard to make by hand.
how many times we shoud role the wire
indian einganeer ur name is intreaging
until you get a resistance of about 6 ohms
perfumed wire he used
now put it into a car and knock the windshield out with a dubstep music
do i really have to waste my sticky-notes for this?
I just made one and hooked it to my home surround sound and it was clappin then my receiver shut off and wont turn back on:((( the speaker was clappin tho hella bass
Mine is not working I don't know why
Man plz also mention the things that you use in your inventions
How do i make it louder ?
With amplifier
Make speaker for piano
What kind of wire
thin copper wires ofcourse
4:30 background music please?
there isn't any
what happen if i use a magnet of a hard drive and a long wire ?
+best shots افضل الّلقطات
Any magnet will work, but the shape of the magnet may influence how well it works.
thanks i choose this project in my study im working in but i still have a problem with link i linked with jack plug 3.5 but i dosen't work tell me pleaz the teatcher will give me a not about it and thanks
You need a decently powerful amplified signal for the speaker to work. Your signal may be too weak.
@@OverEngineered can you use wires without insulation?
where can I get that magnets
+Aleem's creations Any magnet will work. Small round ones are good. Any place that sells refrigerator or information board magets will work.
Aleem's creations no not any magnet will work i got some at walmart and they dont work for this
Aleem's -- it's a neodymium magnets, purchase it lon Banggood.com, or amazon
wowwwwwwwwww
W😮
Thanks
Ok cool
Why now you are not uploading videos
How it's made... Airline headphones
my one is not working
I dont need a speaker cause my laptop is loud as hell