1983 BMW R100RS Rebuild Transmission Shift Cam Assembly

Sdílet
Vložit
  • čas přidán 12. 09. 2024

Komentáře • 9

  • @assessor1276
    @assessor1276 Před 4 lety

    Well done. It’s amazing how simple these assemblies are out of the bike.

    • @BrooksAirheadGarage
      @BrooksAirheadGarage  Před 4 lety

      Hi Peter. Yes, it's not too complicated, but I must say, it's a clever use of springs, cams and levers to achieve the function.

  • @jorgevillaelx7723
    @jorgevillaelx7723 Před 9 měsíci

    Muchas gracias....

  • @61naga
    @61naga Před 3 lety

    Sir this is a very informative video. Is this transmission the same R 100 GS has? Thanks!

    • @BrooksAirheadGarage
      @BrooksAirheadGarage  Před 3 lety +1

      Hi 61naga. The transmissions changed over the years, but not by model. That said, I believe the shift cam assembly is essentially the same for the GS as the RS.

  • @gilbertgoossens904
    @gilbertgoossens904 Před 2 lety

    Hi, I have a 1974 BMW R90/6. I have a problem with the neutral lamp. The switch under the gearbox is new, the light is green, both in gear and neutral. Where can I look for the error? Mvg Gilbert

    • @BrooksAirheadGarage
      @BrooksAirheadGarage  Před 2 lety

      Gilbert, Be sure you installed the gasket ring (part# 61 31 1 355 262).
      I would verify that the switch is not defective. I would remove it. Then I would attach an Ohm meter to the leads. I would push the plunger in and out to verify that the switch opens (infinite Ohms) and closes (0 Ohms).

  • @javiercabreratt2452
    @javiercabreratt2452 Před 4 lety

    🏁🇮🇲