I need an explanation as I want to do this Did the 2.5 cam fit in to the 2.0 head And did you only use the 2.3 pistons cranks and rods in a 2.0 block and head also What intake manifold and what ecu and maf
Yes, all Camshafts from 2.0 /2.3/2.5 fits in all 2.0 und 2.5 Heads. The late 2.0 Cam is the most sporty one. The 2.5 is a bit less but i was able to buy a new one. Yes i use only the 2.3 Piston and Crank. Rods 2.0/2.3 the same. The head and intake is also 2.0. The torque an power in lower rews is the same or a bit better than 2.5. But the top end Power is lower. If you want more power, you must use 2.5 Intake. ECU is the late Motronic from 2.0. But the Eprom Chip for Ignition and Fuel is a tuned software for 2.3.
Oh wow thank you so much I have a m20b20 1991 what can I do to increase performance and is my stock cam better or should I fit 2.5 cam thanks please let me know what I can do to increase performance
@@91drunkenmonkey The displacement of the b20 is to smal. Than the b20 have very low compression ratio of 8,8:1. So engine feels very death. Increase power is with this displacement not possible. The most sensible for more power is to change the engine to m50b25/m52b25/28 24V. The camshaft from m20 b20 or b25 make's no difference.
I need an explanation as I want to do this
Did the 2.5 cam fit in to the 2.0 head
And did you only use the 2.3 pistons cranks and rods in a 2.0 block and head also What intake manifold and what ecu and maf
Yes, all Camshafts from 2.0 /2.3/2.5 fits in all 2.0 und 2.5 Heads. The late 2.0 Cam is the most sporty one. The 2.5 is a bit less but i was able to buy a new one.
Yes i use only the 2.3 Piston and Crank. Rods 2.0/2.3 the same. The head and intake is also 2.0.
The torque an power in lower rews is the same or a bit better than 2.5. But the top end Power is lower. If you want more power, you must use 2.5 Intake.
ECU is the late Motronic from 2.0. But the Eprom Chip for Ignition and Fuel is a tuned software for 2.3.
Oh wow thank you so much I have a m20b20 1991 what can I do to increase performance and is my stock cam better or should I fit 2.5 cam thanks please let me know what I can do to increase performance
@@91drunkenmonkey The displacement of the b20 is to smal. Than the b20 have very low compression ratio of 8,8:1. So engine feels very death. Increase power is with this displacement not possible.
The most sensible for more power is to change the engine to m50b25/m52b25/28 24V.
The camshaft from m20 b20 or b25 make's no difference.
@@W201029the issue is I don’t have the option for change what would you advise me on how to increase more power please let me know what I can do
@@91drunkenmonkey intake, exhaust and a mild cam will get you going.