I appreciate the info. I did a set for a friend and of course I just had to figure it out. Then someone else got in there and said that I didn't do something right and as my luck would have it they screwed it up , so now I get to fix it again but I couldn't make sense of what they'd done so thanks again.
Those headlights look awesome. I just got a 2012 F150 and am about to get the exact same ones. It's so hard to find them in the chrome because everybody is going with black. I love the chrome ones bc I have Moto Metal chrome 20's on my truck and the chrome bumpers. Looks great!
I bet you had moisture problems. I’d say 90% chance. So good luck with the LED’s not dissipating heat very well with the anti moisturizer rubber boot you split!!!! and covering over the back.
Do more Ford Truck Upgrades!!!! Those lights are badd and thanks for leaving a link I'm ordering mine I also have a 2014 Supercrew & 2018 Supercrew... Ty
Just to be clear ...you guys pulled the halogen bulb that came with the headlights form amazon out and swapped them with led bulbs right. Just asking because I currently have led bulbs in my stock headlights .
Hi! I have a problem with similar headlight’s except they just use the factory bulbs and a t harness to steal power from the turn signal bulb. There was no wires to splice all plug and play. However, the turn signal and led accent light only work when the daytime running lights are on. The hazards work and everything always works unless the truck is on and I have all lights completely off, then the turn signals with work. They only with the headlight on or with the drl on
Hey bro what size led bulbs did y’all swap the halogen bulbs with?? Wanting to build a set of headlights for my truck and wanna pick up these DRLs but not sure what size halogen they’re using and what size led kit to order from AUXBEAM. Thanks man!
They are H7 bulbs but I wouldn't reccomend the AKKON brand. The beam patterns is really weird with 1 side being higher than the other. My headlights are adjusted and even with only 1 installed the beam pattern is split.
Did the blinkers flash more rapidly after installation? Everything seems to work OK only the blinkers flash very fast now like a bulb is out but there is not and both right and left side does this..
My Buddy has a F-150 so glad to see you're not staying within yourself on these custom installs, but also happy to see it's friends not just paid jobs kind of things! Keep it up man, solid video and hope all is going good with school!
I got the same head lights but the led bulbs are just slightly too big to fit in the middle housing after the clip. Is there any way you can let me know what exact bulbs you guys got?
Hello mr Torres i just bought the same headlight abd i was wondering if you xan send me a link to the led headlight that you guy installed in the video since the link you have right now doesnt really show it ?
Just got these in black instead of chrome and I'm glad I have your video for reference! Is there any reason I couldn't use the side marker light for the DRL instead of the turn signal?
so I bought the ones that you sent me, but they still don’t fit and I don’t know how to check my bulb size since I have the same headlights as the one in the video
Not for headlights or fog lights. Only for turn signals because LED lights dont draw enough current so the truck thinks a bulb is out causing hyper flashing. Resisters are only there to draw more current to stop hyper flashing.
Just wandering because the hole where the bulbs fit into on some headlights will not fit the LED bulbs since they are larger. My dad is wanting some for his 2009 Lariat and we already have LED bulbs for it. Just making sure the bulbs will actually fit in the housing hole itself. Looks like since you put LED in there then we should be fine. @@TTorres1183
I’m looking for the same answer. I got the same headlight housing but my new LED H7 bulbs won’t fit because it’s too big to insert into the bulb hole. Any updates?
yeah but you have to buy a ballast and after you buy everything it will be about 1200-1500. i have a 2010 and i wanted to do the same thing but for that amount of money you could buy a way better headlight
I bought this lights and the bulbs suck so then i installed led amd they sucked as well very little diffrence so after much research hid are the best bulbs for this projectpr lights i installed the hid and what a world of diffrence
I dont get why my truck has different color wires than yours but also my day time running lights are through the head lights not the turn signal. My turn signal connector is identical to the one you spliced into
@@michaelokelly113 try reversing the cables because LED are particular about the polarity of current. I would personally recommend splicing them into an accessory wire or ignition wire as they would light up all the time when the key is turned on.
Got them to work just hooked them up on my marker lights. Was hoping to get the led bar to act as my drl instead of running my led headlights all the time while in drive
Also the headlight beam is not as clean of a line had this install. Mine has two jagged lines which seem to be from the high beam shutter or something idk. Kinda wierd
Link to buy LED bulbs and Headlights are in the description!
Have they been good after the 2 years? Just curious cause I really want to replaced my headlights as well.
Those heat shrink connectors are nice, but you could have used both ends my man.
I appreciate the info. I did a set for a friend and of course I just had to figure it out. Then someone else got in there and said that I didn't do something right and as my luck would have it they screwed it up , so now I get to fix it again but I couldn't make sense of what they'd done so thanks again.
Can you please make a video about how you put the auxbeam bulbs in? I have the same ones and can’t figure out how to put them in the headlights
Pro tip : the bulb size for these headlights are H7
Man, wish you guys would have showed the LED wiring in the boot. I hate the halogen bulbs!
They just plug and work. It's an h7 bulb to replace so not the standard h13 of the original headlight.
Those headlights look awesome. I just got a 2012 F150 and am about to get the exact same ones. It's so hard to find them in the chrome because everybody is going with black. I love the chrome ones bc I have Moto Metal chrome 20's on my truck and the chrome bumpers. Looks great!
Hi
Video was uploaded in 2018. Just wonder if plastic is durable and doesn’t turns yellow (fade) in time. Some reviews said it. Thanks.
I mean they look great, but why not wire the DRL's to key-on 12v power so you don't need to worry about them with automatic headlights?
Big facts
Yes! I’m having that problem! Mine was all plug and play no splicing so my turn signals don’t work unless my lights are turned on
I have auto headlights
Hell yeah I’m getting these for my 09 platinum. Thanks!!
Update: Finally got them. Dude I’m in love, thanks a lot man!
When replacing the halogen h7 bulb with the LED h7 is it just plug and play?
Yessir
I bet you had moisture problems. I’d say 90% chance. So good luck with the LED’s not dissipating heat very well with the anti moisturizer rubber boot you split!!!! and covering over the back.
Did u put new LED lights in the low beam/high beam lights?
Do more Ford Truck Upgrades!!!! Those lights are badd and thanks for leaving a link I'm ordering mine I also have a 2014 Supercrew & 2018 Supercrew... Ty
I installed some like these but lights blink with the turn signal. Do you have some help for me?
i bought this headlamps amd the halogen bulbs that come with it suck i swapped them with hid amd way diffrent
Yeah we did they same
@@TTorres1183 did your beam pattern change though mine seems to be off amd one side brighter than the other
No... everything was fine. You can always adjust you beam.
Should’ve ran them to the marker lights
I like his oil catch can. Does he have a video on the install?
Great video man. I've been wanting to replace my oem on my 12 150 Lariat but it doesn't look too hard.
Not at all!
Hey bro i really like this headlights I'm thinking on getting them. Will the led bulbs cause any hyperflash?
I don’t think they did...
Did yall to have to use adapters to go from h13 to h7 bulbs?
Just to be clear ...you guys pulled the halogen bulb that came with the headlights form amazon out and swapped them with led bulbs right. Just asking because I currently have led bulbs in my stock headlights .
That is correct.
Hi! I have a problem with similar headlight’s except they just use the factory bulbs and a t harness to steal power from the turn signal bulb. There was no wires to splice all plug and play. However, the turn signal and led accent light only work when the daytime running lights are on. The hazards work and everything always works unless the truck is on and I have all lights completely off, then the turn signals with work. They only with the headlight on or with the drl on
How are they holding up? Are they clouding up any? Would you expect them to last a long time? Thanks
They are holding up just fine.
Can we get an update on these? Has he had any issues or anything? These look solid!
No issues that I’m aware of.
@@TTorres1183 ok awesome thank you!
Link in the description to buy them.
So you used H7 bulbs on the fog lights? 9005 bulbs on the headlights?
Hey bro what size led bulbs did y’all swap the halogen bulbs with?? Wanting to build a set of headlights for my truck and wanna pick up these DRLs but not sure what size halogen they’re using and what size led kit to order from AUXBEAM. Thanks man!
I can’t remember what size they are... I believe mentioned the size in another truck video of mine.
They are H7 bulbs but I wouldn't reccomend the AKKON brand. The beam patterns is really weird with 1 side being higher than the other. My headlights are adjusted and even with only 1 installed the beam pattern is split.
Those look bad ass nice there was no grill to remove made it a lot easier to install
Thanks for watching!
How have they held up probly full of moisture and lens peel ?
Did the blinkers flash more rapidly after installation? Everything seems to work OK only the blinkers flash very fast now like a bulb is out but there is not and both right and left side does this..
Sounds like a canbus error.
My Buddy has a F-150 so glad to see you're not staying within yourself on these custom installs, but also happy to see it's friends not just paid jobs kind of things!
Keep it up man, solid video and hope all is going good with school!
Thanks for the kind words Caine
What u speak english
I spliced the lights to my drls but they don’t run during the day, they only turn on when I unlock the truck and lock it
I just got these, expect black housing. My left light seems to be angled downward, how do you adjust it on these headlights?
Google it it’s hard to explain.
Thanks. I found it. Same as stock ones.
What parts is your muffler and exhaust tip. Mbrp or mbrp resonator ?
Full MBRP exhaust.
I have hid headlight housing from the factory, any model similar to this that would work for me? Mine is a 2014 XLT
Look good man I’m thinking about getting those. Where ur friend get that grill in the bumper from though?
I got the same head lights but the led bulbs are just slightly too big to fit in the middle housing after the clip. Is there any way you can let me know what exact bulbs you guys got?
Hello mr Torres i just bought the same headlight abd i was wondering if you xan send me a link to the led headlight that you guy installed in the video since the link you have right now doesnt really show it ?
Just got these in black instead of chrome and I'm glad I have your video for reference! Is there any reason I couldn't use the side marker light for the DRL instead of the turn signal?
Thats a good idea did ypu get them to work with the side marker
Hey I have these exact headlight what bulbs do you use for the DRL mines went out
Did you had to adjust the headlight and if you did how did you do it
No I did not sorry.
do the drl light blink when you use the turn signal?
No
Does anyone else’s daytime running lights turn off after a certain time
Will these work on my 09 xlt it's not hid or led factory
STRIPPED----STRIPPED THE TERM IS STRIPPED THE WIRE NOT SPLICED
How did you fit the LED H7 bulbs in? I got the same LED bulbs but they’re too big to fit into the hole.
I'm having the same issue did you figure it out.
the link for the aux beam headlights isnt pulling up for me
amzn.to/3GGHhVa
Double check ur bulb size
so I bought the ones that you sent me, but they still don’t fit and I don’t know how to check my bulb size since I have the same headlights as the one in the video
Just Google it bulb size or pull the factory ones and check the size
The bulb size is H7
What colors did you connect the left side ? I believe they are different
Are you figuring out what Color’s connect because my are different from his I don’t have yellow at all
Are resistors needed for the auxbeam LED lights for the headlights and fog lights?
Not for headlights or fog lights. Only for turn signals because LED lights dont draw enough current so the truck thinks a bulb is out causing hyper flashing. Resisters are only there to draw more current to stop hyper flashing.
Did you guys have issues fitting the H7 LED Bulbs in since they are quite a bit bigger that the Halogen bulbs?
Yeah we made a few cuts on the rubber piece.
I was meaning the actual bulb itself fitting into the housing? @@TTorres1183
Just wandering because the hole where the bulbs fit into on some headlights will not fit the LED bulbs since they are larger. My dad is wanting some for his 2009 Lariat and we already have LED bulbs for it. Just making sure the bulbs will actually fit in the housing hole itself. Looks like since you put LED in there then we should be fine. @@TTorres1183
I’m looking for the same answer. I got the same headlight housing but my new LED H7 bulbs won’t fit because it’s too big to insert into the bulb hole. Any updates?
I'm having the same issue as anyone have any answers?
did you guys re aim the lights ?
Are the bulbs that already come with the headlight the regular bulbs? Or LED bulbs?
Halogen which are trash led dont work good with projector hid is what i recommend i installed them on mine
@@alexcabrera1 which hid lights did you get. Have a link?
Do the DRL's illuminate without the lights being on??
I got similar ones
Any updates? Have they oxidized yet?
Still look good as new.
@@TTorres1183 how about 5 years later have they oxidized?
Is it possible to install the lights from a 2014 f 150 to a 2009?
yeah but you have to buy a ballast and after you buy everything it will be about 1200-1500. i have a 2010 and i wanted to do the same thing but for that amount of money you could buy a way better headlight
I bought this lights and the bulbs suck so then i installed led amd they sucked as well very little diffrence so after much research hid are the best bulbs for this projectpr lights i installed the hid and what a world of diffrence
Do you have the link for the hids?
@adolforodriguez5261 amzn.to/3Sa3LEw
I dont get why my truck has different color wires than yours but also my day time running lights are through the head lights not the turn signal. My turn signal connector is identical to the one you spliced into
And also failed to get the led bar to light up on the drl. Any thoughts?
Some vehicles are produced in different places and some have revisions based on when in the year they were made which can sometimes change wire color.
@@michaelokelly113 try reversing the cables because LED are particular about the polarity of current. I would personally recommend splicing them into an accessory wire or ignition wire as they would light up all the time when the key is turned on.
Got them to work just hooked them up on my marker lights. Was hoping to get the led bar to act as my drl instead of running my led headlights all the time while in drive
Also the headlight beam is not as clean of a line had this install. Mine has two jagged lines which seem to be from the high beam shutter or something idk. Kinda wierd
Looks Great, going to see if they have Nitro Headlights :-)
Thanks for always watching
good video man keep it up on the f150
👍🏼
I love these headlights, my friend I would like to know if with that projector you have good lighting at night? I want to buy black headlights
Yes the lighting is good at night!
So the parking lights have to be on for the drl to light up?
Correct
It's just how he chose to wire them, I don't see why you couldn't wire them to key-on 12v power and not worry about them.
Hey man I’m about to order some. Do you happen to have a code or anything?
No sir sorry
It’s cool man just checking before I pull the trigger. Thanks for the vid
So the LED bulb you chose is a dual-beam bulb?
Any new upgrades on this Turck ??
😎👍
Oh goodness, can't believe you brought a BORD into your videos. There's a reason Bord stopped making F-150s for a few weeks...
Explain... I’m confused
TTorres1183 what's confusing...Ford=Bord because Ford sucks.
@@darthtater6543 why did you watch it then?
i dont this that bulb fits that specific headlight
are the LED wrap around lights bulbs replaceable? mine went out
How long did they last? They are not replaceable.