I can only go with the machine speed, still average 500 to 700 meters a day mainline and 6 joints of bellholes and sometimes depends on the ground condition 😉🤘
And its a demonstration can't make the camera to shakey lol.. otherwise nobody wants to watch my video like you just did thanks a lot.. and pls dont forget to subscribe haha... i will make more if i end up going back pipeline again 🤘
can you explain the setup you have there for the depth monitoring? I can hear it beeping and I am curious how that works. We always just have someone in the hole with the laser checking but this is interesting.
Well if you are asking about where's the stairs, theyre buried now, I dig with pride and make it safe for everyone, everyone is happy it make me employed my phone never stop ringing and now I have two excavators my phone still never stop ringing, 😉
I have but i did stupid thing on my phone, i deleted all my water/sewer videos all the video and pictures haha.. i will try making videos again once i have enough of this deep excavation thing!
Most operators that I have seen pull their stick in and curl when they are coming out.of.ditch if u curl just a little and don't boom up to come out.of the hole rather than stick back out and.boom out your material.will basically slope itself
Na daghan pero kinahanglan man P.R ka diri... ug sayon palang maka sulod operator dinhi daghan nako natabangan unsaon man lisod pod dili pareha sa mga longhaul truck drivers
I would if i have a greas gun and grease, But i dont have one! We have a lube truck but hes down we dont stop the production bec. the machine is squeaking
Not really ruining it! Its safer for the guys going down in there there's a lots of rock and it only takes 4 inches or bigger rocks to get a guy injured... i remember before when i dig water and sewer job my pipelayer went down and theres 4inches rock roll down and hit hes ankle swoll like crazy soo sometimes there is a reason why.. ✌️
You compromise the integrity of the wall when you do that. I didn't say when you leave the teeth marks in that you leave debris on the side of the wall. A good operator knows the difference. ✌🏾
Nice digging very clean work
Thanks
Get your speed up a little and you’ll be bad ass, hahaha
I can only go with the machine speed, still average 500 to 700 meters a day mainline and 6 joints of bellholes and sometimes depends on the ground condition 😉🤘
And its a demonstration can't make the camera to shakey lol.. otherwise nobody wants to watch my video like you just did thanks a lot.. and pls dont forget to subscribe haha... i will make more if i end up going back pipeline again 🤘
Excavator450
Ottimo collega, 😎💯. Bella macchina tranquilla. Peso e cavalli motore. Grazie ciao da 🇮🇪
Those steps are sharp bro 👊
Thanks 👊
I hate to say most guys that are working in the hole and have a lot of experience aren't going to have that Patience
You'll find it for 7/12s on the pipeline.
shum pak vlersohet. puna e qdo operatori.
Jam up bro! Bad ass!
Thats some slick dirt movingggg
Thanks
This unique craft of yours bro is your pride n respect...
More power filipino operator...
Thank you soo much bro
@@bodsky28
Ur wlcom brother...keep it up....
Gute Arbeit Kollege, Grüße aus Vorpommern Deutschland
Thank you
Nice work I am also excavator operater where are u frm
Nice... originally from Philippines but im here now in canada for 18years
Аккуратно коллега 😊👍
You are very good
Any tips and tricks for someone working on sloping and benching
@Luke Underwood Thanks, next time I go back digging mainline
Master operator.. RESPECT
Thanks 😊
Beautiful digging
Thank you...
Excellent video 👌
Thank you 👍
@Pinoy Operator Canada You're welcome my friend 😎
Good operator 👍
Thank you..
Back at it again. Trophy ditches
Thanks
Your a digger operator bro, I’m learning watching
Thanks bro,
IUOE baby! Get that money!!
Spora łycha 😊
clean!
I like this big spoon
It was a clean up bucket and they welded some teeth really nice for digging it can move more dirt...
Neat work.
Thank you! Cheers!
rrespekte per qdo operator. 1 m 1 20. cm. 10 ore me kalu pun
can you explain the setup you have there for the depth monitoring? I can hear it beeping and I am curious how that works. We always just have someone in the hole with the laser checking but this is interesting.
That beeping sound is from the gps, we have them soo we dont need an oiler checking the grade instead they are standing/moving the rock gaurd
@@bodsky28 oh damn that is nice. thanks for the quick reply.
Yes it is.. no problem man
Laborers sitting in truck all day and driving past you at the end of the day while you are cleaning tracks and servicing.
Buen trabajo 👍
Thanks
27 vjet pervoj pune.
❤❤❤❤
Awesome! Love the steps! But where are they now?
Well if you are asking about where's the stairs, theyre buried now, I dig with pride and make it safe for everyone, everyone is happy it make me employed my phone never stop ringing and now I have two excavators my phone still never stop ringing, 😉
We got rototilt here in Europe, a lot quicker.
Can you use rototilt for 84" dig bucket? I use rototilt before but for only 200size excavator.
@@bodsky28 they go up to 45 ton excavators. 500knm
Looks good! You running 670 or 470?
Thanks, i am running 470g
@@bodsky28 awesome machine!
Do you have any sewer/water videos?
I have but i did stupid thing on my phone, i deleted all my water/sewer videos all the video and pictures haha.. i will try making videos again once i have enough of this deep excavation thing!
If you pull into you then come back out your ditch will basically slope it's self you don't really have to curl your bucket all the way
You need to show me your video so I will understand what your talking about
Most operators that I have seen pull their stick in and curl when they are coming out.of.ditch if u curl just a little and don't boom up to come out.of the hole rather than stick back out and.boom out your material.will basically slope itself
@Joe-ch1si shit! They must be really good operator I want to see a video maybe I can learn some more tricks 😉
Flawless bro
Thanks bro..
Where were u at in this video?
Grand prairie alberta
naa pay bakante diha mga sir
Na daghan pero kinahanglan man P.R ka diri... ug sayon palang maka sulod operator dinhi daghan nako natabangan unsaon man lisod pod dili pareha sa mga longhaul truck drivers
Unsa meaning anang PR Partner....
@@aslom8976 Permanent Resident
Grease the machine
I would if i have a greas gun and grease,
But i dont have one! We have a lube truck but hes down we dont stop the production bec. the machine is squeaking
Ruined it when you smashed the sides in. Leave those teeth marks on the side so you don't destabilize the natural wall by sliding your bucket down it.
Not really ruining it! Its safer for the guys going down in there there's a lots of rock and it only takes 4 inches or bigger rocks to get a guy injured... i remember before when i dig water and sewer job my pipelayer went down and theres 4inches rock roll down and hit hes ankle swoll like crazy soo sometimes there is a reason why.. ✌️
You compromise the integrity of the wall when you do that. I didn't say when you leave the teeth marks in that you leave debris on the side of the wall. A good operator knows the difference. ✌🏾
Ruined what??? Just stfu. You MF’s on here always got some stupid shit to say. That’s a hell of a job he did.
@@3shooter40 I would stick to rocket league and keep your mouth shut on stuff you know nothing about…
What was the ratio for the slope? I’m learning how to do this with the backhoe. Any advice ??