mine shaver had bad battery i was about to replace it. it worked fine. after i replaced the battery it only blinks red... nothng seems demaged. when i change polarization of battery it runs but 220 cappacitor is very hot. did i demaged it? it showed red light after first replace of battery and it was replaced in good orientation. dont know what to do now. all i want is to replace battery. new battery was 2x 1000mah nimh 1.2v so i think same as the original istead the original was only 750 mah. could this demaged the battery? crazy is that the red light is blinking and when i change orientation of battery it works but with hot capacitor. so is the board demaged or no... i dont know what to do now.
Вроде и полезно, но все важные действия выполняются за переделами камеры, ничего не видно. За это минус. Опять же разобрать машинку гораздо проще, если предварительно снять ножи. Еще серый корпус СДВИГАЕТСЯ вниз, а не снимается с защёлок с помощью медиатора. А то сломаете все защёлки
hi dears! could u please tell me the capacity of an element on the PCB (SMD 0402 Size, near the TP320) and either it is a resistor or a inductor? if you can not find it , please give me your Email address to send its picture. it can help me a lot because i missed it while fixing the BT-5200
Cum pot sa va trimit o masina identică ptr.reparat
Před 5 lety
Imi pare rau, dar nu cred ca se merita, cauta un electronist local/ cineva care se ocupa de telefoane/ calculatoare , ar trebui sa-i dea de capat daca se poate repara. Eu am facut video pt cine e interesat sa incerce o reparatie; chestia ca sunt aparate relativ ieftine, nu prea se merita efortul sa le repari, practic sunt de unica folosinta...
Thanks bro. I learned to disassemble from you
Am schimbat acumulatorii la o mașină identică, ma ajutat mult filmulețul.
Thanks. Good video.
Do you have a link for new batteries?
mine shaver had bad battery i was about to replace it. it worked fine. after i replaced the battery it only blinks red... nothng seems demaged. when i change polarization of battery it runs but 220 cappacitor is very hot. did i demaged it? it showed red light after first replace of battery and it was replaced in good orientation. dont know what to do now. all i want is to replace battery. new battery was 2x 1000mah nimh 1.2v so i think same as the original istead the original was only 750 mah. could this demaged the battery? crazy is that the red light is blinking and when i change orientation of battery it works but with hot capacitor. so is the board demaged or no... i dont know what to do now.
You may have damaged a component I'm afraid buddy, most likely it blew a tiny fuse... can be pretty difficult to replace
Вроде и полезно, но все важные действия выполняются за переделами камеры, ничего не видно. За это минус. Опять же разобрать машинку гораздо проще, если предварительно снять ножи. Еще серый корпус СДВИГАЕТСЯ вниз, а не снимается с защёлок с помощью медиатора. А то сломаете все защёлки
не в курсе какие аккумуляторы там стоят? не разобрал
@@IJahmanI К сожалению нет, это было давно
@@IJahmanI 2шт ААА NiMh 1,2V
@@ser.patrik отлично, спасибо
hi dears! could u please tell me the capacity of an element on the PCB (SMD 0402 Size, near the TP320) and either it is a resistor or a inductor? if you can not find it , please give me your Email address to send its picture. it can help me a lot because i missed it while fixing the BT-5200
Bro, what size of this battery? AA or AAA?
AAA rechargeable
I know it's late but just in case anyone reads this, it's AAA, but it has to be 750mah - not 900 or 1000mah
👍
Cum pot sa va trimit o masina identică ptr.reparat
Imi pare rau, dar nu cred ca se merita, cauta un electronist local/ cineva care se ocupa de telefoane/ calculatoare , ar trebui sa-i dea de capat daca se poate repara. Eu am facut video pt cine e interesat sa incerce o reparatie; chestia ca sunt aparate relativ ieftine, nu prea se merita efortul sa le repari, practic sunt de unica folosinta...