2003-2007 Honda Accord Powersteering flush
Vložit
- čas přidán 23. 08. 2014
- 2006 Honda Accord power steering flush.
Tools:
amzn.to/2aZQxGa 1/4 9mm deep socket
amzn.to/2aZQIkS Turkey baster, Hand pump, syringe
amzn.to/2b5u8I2 Clamps
Plastic plug or tape
amzn.to/2awbSn5 Drain pan
amzn.to/2aZ8qBB 6 feet 3/8 oil cooler hose
amzn.to/2aCSHry Long neck funnel
amzn.to/2aweq4t Pliers
Parts:
amzn.to/2aRojj4 Honda Power steering fluid (need 2 Quarts)
Torque specs:
None
like and share this video!
If you have any questions or concerns, feel free to leave comments on our FB page.
Like us on Facebook
bit.ly/nutzaboutbolts1
and SUBSCRIBE!
bit.ly/NutzAboutBolts2 - Auta a dopravní prostředky
Excellent video. I actually came to this vid because I was watching your "2003-2007 H Accord Power Steering Pump Remove and Install" video and needed to know the Power Steering system air bleeding process. I'm watching all your videos that are related to your "2003-2007 H Accord Water Pump Remove and Install" video. So far, every video has been very easy to follow and understand, and the attention to detail such as proper torquing of the mounting bolts are of high quality technician level--all in a home garage presentation. I appreciate your work, I'm a retired technician myself (A.S. in Auto Repair Technology/ASE Cert's) with specialty in transmissions (Chrysler & Jeep). I wish my generation of tech's had the internet--it would have streamlined getting pay raises a LOT faster to feed and support my family. I'm currently maintaining my son's 2004 Accord and your site is a great source to access and keep my son on the road. Thanks tremendously, and I hope you're available for any special/technical questions if I encounter any speed bumps.
+Rey Villorante thank you for the compliments. We always strive to make the best quality video's out there for the viewers such as yourself, so that they can do this at home and have the confidence in knowing what to do. I am glad our video's have helped you along the way, it just shows that we are doing something right. If you have any questions regarding your vehicles, we will do our best to answer them all with our knowledge to help guide you in the process. Thank you for your support as always! :)
I’ve read how to do it in the manual but this video gives you the visual thanks man very informative and straight forward even shows how to bleed Incase people do get air in the lines thanks 👍
You’re videos are great and thanks for keeping everything so simple:) I paid a criminal amount to have my door master lock replaced my Honda only to find your video about it the day of. Lol keep it up!
Ouch. Thanks!
Good video, one thing I would change is I would use clear tube as its easier to see when new steering fluid is pumping out. You can pick it up at hardware store for like $3 . Also I only needed 2.5 bottles of 12 oz on 2003 honda accord 4cylinder not sure if newer models need more (starting 2013 no more hydraulic). Last but not least apparently fluid is combustible (not flammable) hence you do want to keep the engine dry from this stuff. Again good job guys keep them coming.
I just flushed the power steering fluid for a Civic. I followed the service manual procedure. It is nearly what you see here, but simpler. It is really worth reading the service manual for stuff like this. It takes all the uncertainty away.
I just sucked the old fluid out of the reservoir with a baster, then pulled the return line, attached an extension as in this video, started the car, ran the steering end-to-end a few times to pump out the fluid until it stops coming out - i.e. run it dry. That's the difference from what is shown in this video - no concern about avoiding running dry. Then refill the reservoir, start the car, cycle the steering left to right a few times, and top up the fluid as it pulls in the fluid. That's the service manual procedure for an eighth gen. Civic. It doesn't state any need to avoid introducing air or to avoid running it dry.
The service manual gives a fluid volume for the flush procedure - it was 800 ml for my Civic. I used about 700 ml to bring it back up the max fill line (only two bottles) and didn't have an entire basin of waste fluid to deal with! There will be a thin layer of bubbles in the reservoir that will disappear after it sits for a couple of hours. Note that there is no recommended service interval for the power steering fluid. Mine was 10 years old. I figured it was time :). Running a bottle or two of fluid through it while it draining may (only *may*)) be worthwhile to suck out ever last bit of old fluid, but considering that there is not even a recommended service interval it is hard to say that there is any particular value other than that it "seems" better.
You're prob. right Jim. I agree starting the car will empty the reservoir REAL quick. That's how they got air in system. You can hear the pump grinding at 4:30 when filling up with engine running. Shouldn't run it more than a few seconds. I will try this method of turning wheel side to side only. Maybe removing a main fuse or wire so engine wont start and try to just "one click" starter to rotate pump and get fluid out.
@Heemlo You remove the old fluid so that when you pull the hose off the resevoir you don't dump power steering fluid into you engine bay.
Good job, this is how we do it at Honda but there we have a cleaner that we send trough that comes with the power steering fluid
Thanks for all the info dude! All have watched many of your videos that have ultimately saved me a bunch money. Really appreciate all you do brother!
great video guys thankyou for showing witch hose is the discharge line other videos dont
Of all the how-to videos on YT for a psf flush, this seems to be the best. Personally I would dump all the new fluid into 1 clean container then add it.
+shipemback oreilly sells then by the quart :)
What a great video. I like that your voice is calm and you don't sound like your in an infomercial trying to sell Shamwows. Very cool.
Lol shamwows
No need to start the engine. Jack the front up on stand, key switch to ON and turn the steering wheel, DONE!
Is that just for bleeding the air or for the flush too?
So meed beed to turn the engine on during the process but other wise follow as instructed?
Thank you so much for your videos. It helped me get my mechanical work done! You Rock!
jsanbr glad you like it! :)
Thank you personally it worked out great, although you should raise the front two tires of the car and you do need another person to then on the car and lock to lock while you measure the pump fluid constantly going through to flush out the system.
My next project. Thanks guys, your videos are great!
Carlos Castro np! thanks
You should just be able to disconnect the low pressure hose and turn the wheel from lock to lock to drain all the old fluid out.
I like the "socket coupler" idea!
Good presentation and explanation. Recommendation below by Jim Davidson is a good one. Thanks for your help. Ron
glad we could help.
Once again, another great vid. You made it seem so easy. You help me saved a lot of $$$ with your DIY vids. #subscribed
+Peter Chou lol thanks :) we're glad we could save you guys the money by doing these easy maintenance yourself.
I did this for the first time and that's that thanks for the video :)
glad to help
All i do is take the fluid out of the reservoir with a turkey baster and add clean fluid. .then i drive it a day or 2 and do the same procedure. And well the fluid went from dark to almost clear in week 😊
Thanks for your video. Do you also have the 2004 Honda CRV video especially for serpentine belt change & autotensioner change.
+Tun Thura yeah just search our honda accord video's, it should be the same.
The description for your video lists the incorrect hose size. It lists a 5/8 hose and in the video you say 3/8 hose :) I found this out the hard way when i bought the wrong sized hose :P not a big deal though. Great instructional videos, they have really helped me out with my accord!
+bluebug412 sorry about that, the description has been corrected.
bb
Awesome videos ... I will be replacing my pump soon, im not sure about bleeding the air out, well basically its all about tuning the wheel left and right and topping up the reservoir , that all ? right ? by doing this oil will replace the air
+Don Lee you yes turning left and right on the steering wheel will push the fluids out from the rack and pinion so you can bleed all the air out as well. Make sure to follow the video instructions.
Thanks man for the video, the socket connector rocks.
nice!
NutzAboutBolts how many my honda is going to need 4 pinet may let me know 2012 accord 4 cyl thanks
My fluid still turns dark in the Reservoir. Did I not flush it completely?
I did exactly what you did but you DO NOT want air to get into the system. You should pour ALL the new fluid into one clean container and pour that into your funnel, NEVER letting the reservoir go empty. Once your container starts feeling like it's almost empty, shut off the car. I got air into the system doing it the way you did and it was a nightmare to rid the air out of the system. I ended up using a vacuum at the reservoir and also bleeding one of the lines down at the steering box. Just lifting the wheels off the ground & turning the wheel left & right just wasn't getting the air out. I've heard a lot Honda's can be a pain to rid the air once it's in there.
Would I be able to use just generic power steering fluid for the flush, then fill it with Honda power steering fluid afterwards to save a bit of $?
Think 5 Gal of powersteering fluid will be enough?
Hi man, just a newbie here. I was wondering my accord CL7 2005 doesn't have that power steering reservoir near the wiper wash container? I was checking today coz my steer feels a lil bit harder than usual but couldn't find where it is. Any help? Thanks
So how many quarts would I need? I need to change the o ring on the steering pump because it’s stiff in the morning when it’s cold
Harming Engine? Thank You.
my 06 pilot has a different reservoir than is shown on all of these videos. The intake and outtake are on opposite sides of
Hey man great video, how much of new fluid did you used?
I think the Lisle funnel itself would work well in this application if the funnel fits into the power steering resovior to reduce the chances of air getting into the pump. Maybe?
Carlos Castro the funnel does fit, but we like to keep our parts clean, so we use cheap funnels for that.
Thanks for the video. I am wondering if it's a possibility for you to post a tutorial giving some tips on replacing all the belts for the 2006 Honda accord? Mine are getting worn out and it's time to replace them. Thanks in advance.
+Qu Y The only belt the 2006 Honda Accord has is the serpentine belt. its 1 belt and we have the video for it.
+NutzAboutBolts thanks, will search for that video in your archive.
Hi NutsAboutBolts,
Thanks for your prompt reply & I really appreciate it. If you don't mind could you pls advise how to find out whether my Autotensioner from 2004 Honda Crv is working properly or not. When I tried to move the tensioner to remove the belt , tensioner is stuck & can't move with 14mm wrench.
Tun
+Tun Thura Make sure its not counter threaded. Some are like that, just like our Honda Accord inline 4 cylinders, the serpentine belt removal is clock wise, the V6 is counter clockwise. If it doesn't go one way, do it the other way and if worst comes to worst, you'll just be removing the bolt istead of breaking a bolt.
Congrats. Very soon need to replace p/s pump. When is the pump this make in noise, suck in the air system. After, couple weeks or months p/s pump noisy and not make in pressure. My over 100 piece of Honda p/s replacement experience....
+ToolsSNAPON what? I don't understand what you're trying to say... are you saying that I will have to replace my p/s pump because I flushed it this way? If so, my car has 100k miles and haven't had a problem since doing this at 60k. Sorry that you experience a problem with your p/s pump, even though you never done this before.
Hi I have honda odyssey 2007 RB1, when I turn my steering wheel it makes chatter noise will flushing the oil fix this?
If u still have that problem is a bad CV joint and axle
I followed this video to change power steering fluid on a 2003 honda crv. I filled up the reservoir with new honda fluid started the engine and turn the steering wheel to the left and shut off the engine. refilled started the engine turn the wheel to the right shut off the engine. by the time you turn the steering wheel all the way to the left or right the reservoir is empty. it takes about one 12 oz bottle of fluid to fill reservoir.
Thanks for this video as it helped me flush the bad one out completely. However, I agree turning the wheel left and right completely couple of times will help flush it better. Also, very important never run the power steering fluid pump dry. We have a very light froth during the flush as compared to what is in the video. Still it is an excellent job!!!
+Vikas Gupta yeah that foam is air, so never run it dry or else it'll damage the ps pump as well. good work!
Hey, a quick question. I'm trying to locate transmission fluid filter on my 2007 Honda Accord EXL V6 4Dr Sedan. Do you know it where exactly I can find it? I have already purchased a new one for replacement
+Vikas Gupta not sure of the V6, maybe check the same place as the inline 4.
It's inside the bottom of the reservoir. Also know to clog up if u do more research on them as well as the o rings to the pump
when replacing a new pump ,do i have to bleed it out to???mine pump starting to leak i have to replaced soon..thank
+Ger Mai Lee I think the pump is already filled with fluids, and all you need to do is remove the plug and install it.
(Old video but I hope I can get help ) so I did this and I got air into the system. I drove daily for about 3 months now and it still makes nose when I turn the wheel . But I used generic GM fuild. So today I changed some out with a auto zone Honda type and it got a little quieter but it still goes the same foaming and nosy when cold and gets less when hot . ... What should I do now ? I was thinking of taking off the top hose and pushing it lower so the air could maybe pass ? ...sos
Pie 4life. This isn't going to help you because you must have fixed this by now but for others reading this it might. The problem you describe " foaming and nosy when cold and gets less when hot" is purely related to a hardened seal at the reservoir to steering pump where the pipe from the reservoir joins the pump. It's sucking air in causing the fluid to foam and making a noise when cold. When the pump and fluid warm up the seal expands enough to stop the air getting in and goes quiet after that. Plenty of videos on this. Must be the easiest access of any job on the Accord. No jacks, no stands. It's right there on top, steering right at you! (see what I did there?). One 10mm bolt off, a small low cost seal on, one bolt back on, then start engine, no noise, no foam and a huge smile!!
tip, have someone narrate the video for you, you sound like your doing this at 3am in the morning.
A little enthusiasm helps. Awesome video. Ty for posting
Which line you got that bleeding the fluid out??
Where do you buy the socket coupler ?
Noted & tks again for your advice.
+Tun Thura np
G'day from Sydney.
I just did a PSF flush on a 2003 2.4L, CL9 Honda Accord, with 298,000 Ks. Could I suggest you first remove the reservoir and empty out the old PSF, you will find that there is a mesh strainer/filter at the bottom of the reservoir, that in my case was full of dirt. I cleaned it out with solvent before refitting to the vehicle. I used 2 litres of Honda PSF for the flush as fluids such as Dexron IV cannot be used as they break down causing noise and poor performance I was told by an experienced Mechanic friend of mine.
I hope this helps.
Jim
I agree with everything you wrote. Ours was still low miles so we didn't clean the reservoir, we will when it gets high in mileage. Thanks for commenting :)
Great video, I want you guys to notice something, why would you use small bottle?
I would just pour all the fluid from small bottles to a big container, so I dont have to bend over and grab the little ones, one by one
That’s all they had at the autostore, if you can find a 1 quart bottle of power steering fluid, I’d recommend that.
I got a used 2000 Honda Odyssey it has 231,000 miles,Can you tell me if I can put Slick 50 in without
The common slick 50 power steering fluid product I believe does not come in the Honda formulation. I actually scored some powdered Teflon in the various grades used for automobile applications and have made my own ptf' home Hooch. Actually if I'm lazy and don't want to flash I just take some of the powder Teflon and dump it in the top of the reservoir not too much never had a problem everything is Big clearances in this PS pump and rack
If you have an old car and the fluid hasn't been changed regular, I'd suggest after you empty the reservoir just remove it completely and clean it out. I sprayed Brake Clean into the bottom tube and it freed up a lot of gunk from the filter in the bottom of the reservoir (8th gen Accord). .
@0:27 which grade power steering fluid is used?
My power steering system is a mess. Constant noise , fluid overflowing and I just don't know what to do anymore
Good video...if you have a shop, time,..."special tools", etc.
Easier just to take your turkey baster....and buy a quart of Honda PS fluid and change it 2-3 times with the baster.....much less work....less efficient...but doable for evryone.
+Frank From Upstate NY it might take more than 3 times since there's a lot of fluids in the p/s system, including in the p/s pump... doing it this way will ensure that all of the fluids going in will go out without being mixed in the fluids. Basically what goes in will go out since there's 1 exit in the system, which is being flushed out.
I can't find power steering reservoir on my 05 accord v6 hybrid.
Do you have any idea where it locate?
+chamrouen if it doesn't have it, then it's probably electric power steering. Kinda like the Prius.
Great vid. Probably shouldn't run it more than 2 second. The fluid moves too fast so air got in the system. I'm going to try but will start 1 or 2sec. stop and refill.
air will eventually get in there, that's why at the end,you bleed the air by turning your steering wheels left and right. There will be bubbles in the reservoir. But yes, don't run the power steering pump dry, or you will damage it.
What is the part number for a quart of Honda P/S fluid?
I can only find 12oz bottles.
Not sure but you can find them in the auto store. That’s where we got ours
Another thing: Honda had recalled 07 through 09 through pressure hoses, now they have recalled the 03 to 06 too. I assume they will flush the fluid when they replace the hose (I could be wrong). The hoses were leaking (like my 2000) because they were not designed to withstand the high pressure & heat that the hose is exposed to...
dxhydrodotcom that's good to know, I haven't received any recall notice yet. I know that my vehicle power steering reservoir was leaking before due to a defective reservoir, once I replaced it, it stopped leaking. I'm not sure if it happens to all 03-07 vehicles or its just my vehicle, but it was an easy fix.
NutzAboutBolts They did not actually flush my fluid when I got my P/S hose replaced. Not sure why
Matthew Pfender because it doesn't come with the service when they replace and repair your p/s hose, they will charge you for the flush service.
Can be bad or will be bad?
I have honda edix 2004 and my power steering fluid has bubbles what is the best thing to do to fix problem
Put fluid in it. It's low as fuck my guy
Alvin Alfonso bubbles mean your powers steering pump is shot, not matter how new or full the fluid is, the pump is gonna need fixing or replacing
There's a low side o ring that needs to be replaced. Most Honda Acura are known for this problem. Also on CZcams as I research this problem on the forums
Excuse me, you drain out the dluid from the low pressure line ? Because there's high pressure and low , [ or return line] . !?
Yes, that’s the return line that we are draining it into the drain pan.
Hello man
I wonder what's the diameter of the "connector" that you use on the drain hose?
Frank Tony Its a 5/8 hose.
I have 2005 accord 4 cylinders with same accords power steering issue , oil leak from everywhere , and heavy steering... I love the car but I don't know what to do.. 😭😭😭
+Mohammed ELSanousi find where the leak is, heavy steering could be due to air in the system or a bad pump...
Also can use hand soap or shampoo soap PUMPS...save them when finished ... to pump out fluid from reservoir
Just subscribed! The power steering fluid that came out of my 08 accord lx was also foamy, probably because of trapped air in the PSP. I just changed the power steering fluid. I didnt flush it though. just took out about 3 quarts, put back in 3 quarts~. My steering wheel is a lot less stiffer... but still stiff in comparison to my friends car. I read somewhere that you can "SEAFOAM TRANS TUNE" your power steering . Do you think there's gunk in my PSP that needs cleaning?
crufzeiro never heard of sea foam for ps fluid, they're used more for fuel and oil. I wouldn't use anything for ps since its not necessary and I'm not sure if its compatible.
Hello, can/should I replace with an aftermarket reservoir for Honda, like Dorman? Thanks.
Up to you, personal preference.
NutzAboutBolts just wanted to make sure it won’t damage anything 😬
Just a pointer you can do it a lot smoother and by yourself if you don't turn the car on but the only downfall is it takes longer
What size is the tubing he put as a plug for the power steering fluid?
half inch is pretty my Universal go- to , for this kind of clear tubing. If it's a little too small take a cigarette lighter and heat it up and expand the end. Is there a super cheap like I am with two kids in school , use the clear for only last foot. I pick up all the tubing I need for free at the junkyard. I never been charged miscellaneous Oddball hose. Laying around the yard
how do yoy clean the motor? what products do you use to clean motor in honda accord 2006 ?
Did I miss something? How did you get rid of the air in the system?
mostly does it on it's own, just gotta top off the fluid
by turning steering wheel left and right with PS reservoir cap off, air will come out with bubbles thru the fluid, once bubbles stop you should put cap on again and its all done
good video, did u used all 5 little container ?
yeah, it wasn't enough for the flush, so we bought the big quart bottle.
Quick question bro, was the hose you used for the drainage, was it 3/8 outer diameter? Or inner diameter? Need to know ASAP thanks !
3/8 inner
Is bad fluid or pump can cause pulsating steering wheel while turning?
That would be due to failing O-rings inside of the steering rack...time for a replacement rack soon. The pulses come from fluid pressure building and then gets released past the O-rings of the piston that pushes the steering left or right...and happens again and again while turning...thus the 'jerk' in the steering...especially on long turns on the highway right? Ask me how I know!
Hello.. The 1/4 inch socket is shoved halfway into the drain hose and the other half into the power steering hose i presume? ( And then the two hoses with the socket in the middle are held together with the clamp?)
Yes
@@NutzAboutBolts ok ty.. That socket looks like 2 inches long or so? Mine are only like 3/4 inch long....
@@jimspencer5746 don’t matter if it’s too long, as long as the hose fit so the fluid can pass through without leaking through the hoses
This flushing can solve hard power steering problems?? Regards
+Alex Gonzalez its possible but no guarantee, if there's air in the system, it can cause hard steering. But if you have a bad pump, it can also cause hard steering. This would be the cheapest route to make sure its not the fluids that is the problem.
Haz Videos en español mi amigo porque no todos sabemos inglés
Hey i have a problem my two lighter sockets don't work in my car how could I fix that
Mel Matrix check your fuse if its blown. it should be by the driver side kick panel.
Set the car on fire then use burning car to light cigarette.
I wanna do this but half the people say to replace with Honda fluid and half say it doesn’t matter.
i say use cheap fluid to flush everything out then when all the fluid is out you put in the honda fluid
Thanks.
How abt just turning the steering wheel to flush the fluid without starting the engine?
It's power steering - the engine provides the "power" through the belt to run the pump. You need the pump running to move the fluid through the system. Without the power, the manual connection to the wheels will work, but no fluid will move in the hydraulic system.
I had to also change the belt tensioner, so I left the belt off, then used my hand to spin the pump pulley to pump the fluid at a slower pace.
You are doing it wrong.
Raise front wheels off ground fully with jack stands. Remove low side hose and plug port as you did. Add longer hose to low side hose to reach catch pan. Turn wheel lock to lock 10-15 times. Refill two or three times doing that. Or until you see clean fluid coming out. So now clean fluid is through the steering rack and reservoir. Reconnect low side hose to reservoir. Top off fluid. Turn wheel lock to lock 10 more times. Keep fluid at the full cold mark. This bleeds the air out of the system. Start engine and crank wheel lock to lock 10 more times. Check fluid level. Lower car and check for leaks. Should be golden.
last time i did it, this is what I did:
1) remove fluid from reservoir
2) fill the resevoir with new fluids, turn on the car, once you turn the car on, the power steering pump will pump through the fluids, no need to turn your wheels left and right. you will see how quick the fluid darknes (when it's mixed in with the remaining fluid in the system.
3) I turn off the engine, repeat step 1.
do it about 6 times, until the fluid in the reservoir is just as clear as the fluid out of the bottle, takes about 3 bottles and call it a day. no need to remove any hose, or catch and fluid.
@mas360
How much should this cost at a trans shop? I took my 2007 accord in to have the trans fluid changed and he did a drain and fill just ONCE and charged $120. He told me to come back again in a few months for another drain and fill because I know just a drain and fill one time only removes about 40% of the fluid. So he should have did a drain and fill 3 times and be done with it right? Would save me labor I would think??
@mas360
Thanks for the info.....I actually knew about the "flush" caution. I never flush a trans with high mileage (this accord I bought a few months ago had 115,000) if I dont know the history because if u flush a high mileage trans because trans fluid is a cleaning fluid u can have shifting problems u never had so I always just do drain and fill, I'll do next one myself....the shop said they used the Honda fluid and they have great reviews on YELP it's a long time trans specialty shop.
So you don’t take the top hose off and do it with the bottom hose that goes into the engine or pump. Sorry I am trying to do it, and I don’t wamma mess up. Thankyoy
Doesn't this process seem risky? If you aren't filling it fast enough, wouldn't you be introducing more air into the system? Is there a more technical way to do it, or this pretty much how it's done? Thanks for the video BTW
+Herbster1124 you can do a 1 person method by turning the engine on and off immediately so the fluid gets drain out and refill and redo until the fluid is clear
This is probably the safest way to do it, I'm going to do this.
The hose mentioned in the video is 3/8",,,is that the OD or ID?
+Najib Nawas that's the inner diameter, it'll say it on the hose.
+NutzAboutBolts thank you
So a guide of how NOT to change the power steering fluid! Cheers!
The manual was authored by idiots. This is NOT how you do it. You don't actually start the engine... you run the p/s pump by using the starter motor only (remove spark plugs and disable EFI/injectors).
Marek Sumguy yeah because that’s how to make great flat rate time in a shop. Not.
What??
Marek Sumguy you don’t remove spark plugs and disable the injectors to do a power steering flush. Esp when you work in a shop and you are being paid flat rate.
Yeah... thats exactly what you do. Its called "doing the job PROPERLY"
how to bleed it without special tools?
those aren't special tools... they're basic tools you will need. Specialty tools would be a machine, you can buy the hose from auto part stores.
How do you keep your engine area so clean?
iamkraine if you watch our engine bay cleaning video, that's how we keep it clean :) gl!
OCD
Hi, wanted to know where do you got all fluids to do this job? which website that you go to? thanks
Max NG We got ours at O'Reilly auto store. You can buy the fluids at any automotive stores or at the dealership.
I see, i never know Oreily sell honda genuine stuff. Will defitely check that out. Hey, thanks for your videos. I learned alot from that. If you planning on making some new video, can you consider making video about fixing the "trunks n fuel release", mine for some reason stuck n jammed n stop working on the truck but works for fuels release, thank God. Lol..
what size of the hose you use to flushed it!
Not sure the hose size, but you plug the top port of the reservoir off and you use the bottom port of the reservoir to drain the old fluids out.
Do not run the car while doing a flush! Just turn the wheel left n right with the engine off.
And it's easier with the front end up to reduce stress on the system
Where did you find the quart size at?
Yeah, bottle looked black and not silver like genuine honda bottles come.
You should of done it with the car off just jack the front wheels an turn left an right an it would’ve drained the same way just not as fast 🙏🤘
You can’t do it with the car off lol you’ll get a steering wheel lock if you try to turn left or right.
I think what he meant was key in the on position in the ignition with the car raised with the wheels off the ground. Then you'd just turn the wheel lock to lock and use the rack itself to suck fluid through the system and pump old stuff out. Eric the car guy and your videos are similar that you'd run the engine and use the pump to get the old stuff out, but a few other videos on CZcams have demonstrations as I mentioned before, which airs more on the cautious side as you don't necessarily run the risk of the pump running dry and doing damage. All in all though, great demonstration, both methods work, but you just have to be extra careful like you mentioned in your demonstration as to not run the pump dry.
Nick 631 key on would mean the engine isn’t running. The pump is belt driven, so you’ll need the engine to run for it to work.
The rack and pinion will push the fluid through the system as you turn the wheel left to right I have flushed multiple cars this way!
I just flushed the system on my '97 Accord, front wheels off the ground, engine off, turn the steering wheel left and right until the fluid came through clean.
The process goes slower, but there's very little chance that the pump will run dry and get a lot of air in the system.
I wouldn't use the end of the hose that goes into the reservoir, on older cars the plastic gets brittle and can break.
+samuelxrc the reservoir could break? I'm a little confused...
+NutzAboutBolts yeah man both hose and reservoir get real brittle, Ive had one break just by moving it.
+samuelxrc could be a defective issue, my rubber hose are still pretty flexible. My old reservoir that came with the car did leak from the bottom and I had to replace that. That's the only problem that I had from that area
Is this a video on how to destroy your power steering pump? If so, I will like it.
How ? Cause I'm gonna try this I'd like to know
why?
Don't forget the O-ring on the Low pressure hose that goes back to reservoir
I think you're thinking of the high pressure hose. The lower pressure don't have the o-ring since its low pressure.
NutzAboutBolts it def has an o-ring
Yes, low side is Orange o ring to a plastic tube held by a 10 mm size bole, high side is a black o ring held with 2 10 mms bolts
Where can i buy that hose, and clamp?
siddhartha ram I listed all the parts in the description box. You can buy the hose at any auto store or HD or Lowe’s
Can this work for a 2011 pilot? It looks very similar..
Nate Catona I’m sure you can.
@@NutzAboutBolts alright thanks 4 the reply and how many bottles did you need for yours to bleed clean?
Nate Catona I used about 1 qt?
@@NutzAboutBolts oh thats not a lot....
where can i find bigger bottles of honda fuild ?
+Pie 4life we got ours at oreilly, make sure to read in the back that it is compatible with import vehicles or Honda vehicle.
NutzAboutBolts Ah , so there is no offical honda made one ? I can find other brands at that size but i wish to only use the real thing . But anywho i guess i gotta go find something could you maybe link me to the correct fluid ? That you trust alot.
+Pie 4life Honda only makes the 12 ounce bottle, after market bottles like this www.oreillyauto.com/site/c/detail/MP00/80810/N0493.oap?ck=Search_N0493_1432618_3199&pt=N0493&ppt=C0175 is what we used and is compatible with Honda. We've only used this and it hasn't cause us problems, Honda's fluids are too expensive for only 12 ounce.
How did you get it to flush out from that long house?
by using the engine to run the p/s pump.
NutzAboutBolts ok thanks!
Can't you just lift the front wheels off the ground and turn the ignition to "ON" but not start it and just turn the steering wheel side to side? This is slower and easier for one person to do so it doesn't run dry. And use a clear hose so you can see the color.
its possible with 2 people so you don't run the pump dry.