Video není dostupné.
Omlouváme se.
Can I Design a Whole Project in Bambu Studio?
Vložit
- čas přidán 5. 08. 2024
- This episode is sponsored by Aura! Take your secrets off the market with 2 free weeks: aura.com/zackfreedman
MakerChips are NO LONGER AVAILABLE!
But you could still support me anyways on Patreon! / zackfreedman
Also join the Discord! / discord You won't get a chip, but the real chip is the friends you make along the way.
Download my MakerChip to print yourself: than.gs/m/1101730?...
(ONLY WORKS IN BAMBU STUDIO!)
===Featured Models===
Some of these links give me affiliate revenue.
MakerChip Starter Pack by K2_Kevin than.gs/m/1042339
MakerChip Matrix by K2_Kevin than.gs/m/1093944?...
MakerChip Gridfinity Stand by Yours Truly than.gs/m/1101729?...
MakerChip Storage & Display Box by K2_Kevin than.gs/m/1042006?...
Pokerbot Makerchip by Nunyabidness214 www.thingiverse.com/thing:104...
2-Part Maker Chip by Nyfe www.printables.com/en/model/1...
Pezliz's Chip than.gs/m/1041975
MakerDeck's Chip by Fabricat3D than.gs/m/1041974?...
Royal Gnomie's Chip by Pezliz than.gs/m/1093452?...
TechJeeper's and Glendon's Chips www.printables.com/en/model/9... Pawliemorph's Chip than.gs/m/1089667?...
3D Printy's Spring Chip than.gs/m/1071216?...
Hedgehog's Outrun Chip than.gs/m/1093458?...
Karen Chau's Chip than.gs/m/1057945?...
Built Over Bot's Chip than.gs/m/1052996?...
JamesThePrinter's Chip makerworld.com/en/models/5221...
===Featured Filaments===
Some of these links give me affiliate revenue.
Prusament Galaxy Black PLA www.prusa3d.com/product/prusa...
Polymaker PolyTerra Slate Marble PLA amzn.to/4cUfkHm
Cookiecad Lavender PLA amzn.to/3zBj3v4
===Timetable===
00:00 Intro
03:11 What's a MakerChip?
05:09 Filthy Slicer Hacks
08:08 Quagsire, I Choose You
11:30 Adding the Logo
13:15 Adding My Face
15:26 QR Code and SECRETS
17:06 Plating and Printing
18:14 Get Your Own Chip
19:05 Patron Thanks
===Credits===
Interference SFX: Partners in Rhyme
the nfc tag on the chip is just a rickroll
i dont actually have a chip, i just know.
Yeah like when he said you are a 3d printing nerd and to print your official certificate
it actually goes to a bitly link which goes to an unlisted video on his channel
which coincidentally was uploaded 10 hours before this video was, despite opensauce having taken place weeks before
i strongly suspect that if i had thought to hold my makerchip against my phone before i watched this video you would have been right
This is what I’m assuming also
@@amateurprogrammer25 whats the link
@@somerandomdragon4655 that would be telling. besides, youtube doesn't let you post links in the comments.
the irony of saying "use this website to stop data brokers from stealing your personal info" and then later in the video saying "DM me your address for free maker chip!" (tbf i trust zach friedmen more than most people with that info)
Indeed. Though ultimately you can't stop folks from getting your info anyway at least not if you interact with the world at all, and hiding in a cave deep in a forest in the middle of nowhere doesn't sound like fun.
misspelling someone's name while its mere pixels above the comment field is actually wild
@@ziggyzoggin i agree ziggozyggin
@@TillyCorbin thanks, nice temmie pfp, tally corbon
@@ziggyzoggin yeah what a weird mistake for darkstavebruff to do
A single all-nighter is the only way to get anything done, with ADHD.
Nothing for a week, then 24 hrs... The only way.
That’s how I double majored in uni
It’s terrible for my health. But, damn if it doesn’t get stuff done
This is the way@@marksnethkamp8633
This is the way ✊
FYI... Making a MakerChip is A LOT easier than what we have just witnessed. As always. AMAZING work ZACK!
Shhh, he's making me look like a pro! :)
Hard mode for sure! Even I was able to quickly take an image, turn it into an SVG, and import it into the slicer. Tinkercad does make some things easy
Next video: Design something by manually writing the XML of a 3MF.
genius! making hundreds now!
Thanks. None of us knew that. So glad we have people like you that can explain it to us… fucking reeee turd.
11:28 omg I'm programming in rust while watching this, I've never felt so called out
how big is ur buttplug tho
Is your butt plug tucked in tight?
you know this is an educational channel because he starts the video by claiming all of this was done without CAD software and then proceeds to show exactly what goes wrong when you don't use CAD software
@5:01 "I have no idea why this kind of thing motivates me, but, like, us ADHD people learn to get our executive function while the getting exists".... Not only do I feel seen, I feel felt, I feel understood, I feel affirmed, I feel myself when I think about... wait... hold on... wrong song
I'm pretty sure the NFC tag lead to a video of a man named rick with a familiar voice
@@aminghafoori6496 never
@@karenchaudesignsgonna
absolutely
Ol reliable.
@@karenchaudesigns gonna
Sponsor: "Everyone sells your personal information."
Zack: "Send me your address."
It isn't a Zach Freedman video until I hear him say "Periodclots"
Waiting for you to do a sponsor segue where you introduce yourself as Zack Paidman
Fuck! That's so good.
/antonio-banderas-oh.gif
"If I wanted it on two printers, I would have to remake it in Prusa slicer; so I didn't" that's a whole mood right there SuperVinlin
Met the tall guy in your montage of meeting people when we were in line to get in. Such a cool dude. He was so excited to be there and share his maker coin. Good for him, he must have had a blast too.
🤯 Awesome video as always! Thanks for featuring my chip! 💖
I'm pretty sure you can insert a SVG using the Add (Ctrl+I) command in Bambu Slicer, that's how I add things to my top/bottom layers
So exciting to see a friend's project turn into something so great! The next RepRap Festival is going to superload my MakerChip collection! Thanks for the video, Zack!
* _Scans Zack's Chip_ *
Rick-Rolled.
wow he uploaded
No kidding. I thought the poor guy had passed away.
Probably been printing 500 chips.@@joelamaro4525
@@joelamaro4525 Yeah rona can do that occasionally.
Bro I’m still waiting for oversimplified, maybe he’s in a coma
He uploads infrequently, but I love his content!
"I inadvertently dodged a bullet the size of an average rust programmer's butt plug" wow that's a BIIIIG bullet (i am the average rust programmer :3 )
Rust really is rust.
oh she just like me fr
Oh hi Luna :3
@@ChloeMerrill624 hii :3
So am I.
The nerdiest nerd whoever nerded is BACK! Fun video as always, man. Glad you and the Mrs are on the mend.
Woah so awesome to see my qrcode2stl tool in one of your videos!
I made this in like a weekend and that was the first obvious name so I went with it :D Also you gotta do it for that sweet SEO ;)
More videos about 3D printing design! Hearing you talk through the processes is amazing!
With your first example of loading in a multi-part coin, there are a couple ways of getting it recognized as a multipart model. The first is to drag-and-drop all the items into the slicer window at once. The slicer (if Bambu Studio maintained this capability from PrusaSlicer) it should ask you if you want to load the parts as individual models or as a multi-part model. (I forget the exact wording). The other way that I know of is to load the first part, and then add part from file repeatedly for the rest of the parts (again if Bambu Studio maintained this capability from PrusaSlicer).
Hi! Im the Maker Coin NFC Scare guy! Its so weird to see myself in one of your videos.
Good to see you at OpenSauce!
The in slicer design is super impressive!
Now i have to go re-scan my chip! Say hi to Rob for me!
I can’t tell you how much I’ve missed your humor in videos, so it’s delightful to see it again
There's now a version of OrcaSlicer that supports tool changers
He is alive yaaay
Not sure if this was intentional on your part, but that .3mf preview at 7:18 really looked like a Time Gear to me for a few seconds. If that was intentional, well played, you are clearly a man of culture.
Awesome. Glad to have one of the chips and it was nice meeting you at Open Sauce!
Glad you peeps are doing better. I look forward to the cool vid's coming down the pipeline.
Thanks again for an entertaining and educational video.
Watching all the way to the end to help satisfy the algorithm.
I don't work in layers small enough to run into multi-material details becoming transparent.
However, they need 3 layers in my experience.
Because the first one is messed up, two more layers to get an even cris-cross going to hide the sins of Blotchy McSmeary layer 1.
Maybe one more layer if you're sanding it down lest you tempt the revengeance of Blotchy McSmeary.
I'm not even close to getting a chip but something tells me the nfc tag's content will never gonna let me down :D
I'm in this video!! Open Sauce was so fun and it was awesome to talk to you again (I got to play Hextraction with you last year and won) but I'm soooo sorry you and Brooke got sick! You were both incredibly sweet and I'm excited that I got two chips from you!
IT'S ALIVEEEEE
14:46 "Has a known issue... It's basically worthless." Same.
if i ever see zach freedman, tom scott and micheal stevens in a room together i thunk that the amount of intellect will make my brain explode
I got covid soooooo bad after open sauce too. I am just now feeling all the way back to normal. It was so so nice to get the chance to talk to you and Brooke this year!!!!
10:38 Yo Zack! I ran into the same annoyance when it came to rotating parts around a center for a similar purpose. You can align the rotation better (for even numbers) by first mirroring the part across the center, then merging those two parts. This gets you a center point at the center of the rotation. Then duplicate your part, copy and paste the location of the original, then perform your rotation, each pair of mirrored details will have their center point at the exact same spot. Cheers!
These are Amazing! Making them now for the next show. THX Zack and K2_Kevin!!!!
Zack, thank you for featuring my maker chip prominently ( regardless of whether or not it was inadvertent 😝). I'd love to add one of yours to my collection!
Hah, I watched the first 20sec and thought to myself "Why am I always slower to put my ideas into reality before a known and respected youtuber does it" :D Nice work. I will now watch the full video and see if I can learn something to improve my process. Thx for sharing with the community!
Gotta catch ‘em all!!
Those are cute. And poker chip size is basically perfect for NFC pogs imo so nice.
Dude! Haven’t even seen the vid yet and you rock!
If that's not geeking out, i don't know what is. I love it :D
You are the 3d printer version of ElectroBOOM electrical engineer guy who shocks himself. This was fun and painful to watch.
The captions have an impressive set of different names for Prusa slicer. She's Pia now.
I'm sure bambu sells spare parts for your AMS -- if they've restocked ANYTHING after that sale last month.
The final patreon names being chaotically cut off by character limit is SO much better than abbreviating them sensibly 😂
ive been rewatchin this video so many times to make a maker chip and it finnaly worked
looks fun
Absolutely nuts. But awesome!
Hey! The blue white and orange Sucker Punch mini made it in to a Zack Freedman video!!! It was so cool to meet you guys. Can't wait to dig my Fredman coin out of my mound of swag and follow a mystery link on public access internet.
Time to make Art.
Or at least something that xould be mistaken for art at a distance.
😂😂😂 Love it! I'm going to use that next time I endeavor to make something!
I would love to see a video where you design a model in the online cad, TinkerCad
" your disappointment will be worth it '🤣 now that needs to be on a Void Star Lab's shirt!
When I tell you I audibly screamed when I found out Prusa slicer can convert svgs, when I spent an inordinate amount of time figuring out how to do that in the past
Neat, I just did this a few days ago, needed a flange bushing but fusion wasn't opening, so I did it in prusa.
Very underrated. I have done a lot of manipulation within OrcaSlicer that, for me, would have been more difficult/time consuming in CAD software.
Absolutely incredible project! Is there a video where you get into the upgrades you did to your AMS?
Gotta love having the option to print in superposition
You kinda got Germany-Rickrolled with that "Nett hier, aber waren sie Mal in Baden-Württemberg?" at 20:37 :D
Hey zach, I was having the same problem when making a phone case with an emblem on it. It took 6 hours to figure out. You can’t make the emblem a negative part. Make it a circle, scale it high tall, cut it in half. Use the lower half as a negative to carve out the where your going to set the top half. Move the top halve onto the piece and line it up. It has to stay as a positive. It’s wonky as fuck but it works.
To make it clearer. You have to carve out the area, and then add the ridges in.
I got one of these and had no idea it had an nfc tag! I don’t remember if I gave you a keychain but those were my attempt. Next years OS I’ll have to crank out a few of these…
This is like the CAD equivalent of all the stuff FreeBSD does with makefiles.
i’m trying to figure out what exactly your company does cause i love it
When exporting to 3mf in OpenScad(Dev. Version) all top level objects are seperate objects in the 3mf file.
I've done some light CAD work in PrusaSlicer, but nothing this insane. Congrats on getting it done before going (even more) insane. ;-P
After getting my P1S, I started exploring the Bambu Studio software. I was trying to see what all I could do with it. I found I could do a lot with it. I hadn't used any other type of 3D modeling software before. I've tried others now, yet I usually just end up using Bambu Studio because that's what I'm most familiar with. Some things are definitely more difficult than they should be. I'm still looking for a different software I can flow well with for designing more complex models.
Bambu Studio does let you import .SVGs directly in the same file picker as where you'd add an .STL :)
Glad you didn't die 🙏
Stopping the name at twenty characters actually made me want to watch until the end. 😂
Chips are definitely cooler than coins
DOWN WITH @ZackFreedman!!! He didn't stop by our Open Sauce booth!
They're called primitives because that's the shapes the cavemen and cavewomen 3d printed with
Can you resize that part panel when you’re painstakingly dragging parts around?
Anti-benchy! Brilliant!
The fact that I clicked here while waiting in a micro center parking lot is funny
well done! Hope slicers get better, cba to learn fusion or blender
The NFC is a Rick roll isn't it
You need an ams leading into each spool port of an mmu and multiple of those leading into a tool changer
its wild how acceptable you look when you've washed. you should make a device that waterboards you every few minutes to retain this freshly washed advantage/lesser disadvantage.
Hi nerd 🤓
Great video, I'm glad you are feeling better!
Welcome to hacking your slicer! I like to save assemblies to the gallery and then bring them back in. Makes it easier.
Bros not dead W
looks tasty
I'm sorry but the "PrusaSlicer Cinematic Universe" BROKE me ahahahahah
I love the anti-benchy
I feel like Zach missed the fact that Bambu Studio CAN import an SVG and then treat it exactly the same as an stl. I've done it repeatedly, going back about 6 months.
so when making clips or parts that have to flex into place what is the most springy infill patternt
I have a sneaking suspicion that the NFC tag leads to a youtube video with a suspiciously familiar number of Qs and Ws in the URL
Tinkercad can also import svg and you can export as STL.
Sir, you are a mad man. Good content though! 😁
How many layers did you allow for the NFC tag? Also could you give a link for those tags? Thanks!
awww now I'm sad I missed you at Open Sauce :(
What happens if you open the 3mf in Blender or Windows 3D Builder? I feel like one of those should be able to re-export the file in a less problematic fashion.
Masochist. The state of slicers and the awkwardness therein gives me nightly nightmares. "NO! NO OBJECTS ARE INTERFERING, LET ME PRINT!!"
18:10 funny i watched this video but i evidently wasn't paying attention when this clip of me came up. a friend ended up seeing it and sending it to me.
Man, this is like an incredibly painful version of TinkerCAD. I guess like what TInkerCAD was 6 years ago, haha.
Clever boy.