DIY ASTON MARTIN GT3/GTE STEERING WHEEL SIMRACING
Vložit
- čas přidán 4. 06. 2024
- Thanks for watching, this rig has 12 buttons, magnetic paddle shifters and 5 encoders, can be plugged directly into PC. Works in every game. It’s a great addon for racing games, gives you more immersion and more fun driving GT3 cars. Make your own, good luck!
Check all my projects on my website:
projectnextrace.com/gt3-steer...
Instagram:
/ projectnextrace
Facebook:
/ projectnextrace-105831...
Files for 3D Printing and every file you need for this project:
gum.co/DvbFH
Required parts:
- Aluminium Sheet 3mm x 200mm x 400mm amzn.to/3wlaXjL ali.ski/GK-AB
- Carbon Fiber vinyl amzn.to/3gjY9og ali.ski/ldEKK
- Suede Leather amzn.to/3gjYKq0 ali.ski/Dkb5Ow
- Fabric Glue amzn.to/3xh6UoD
- 24x M3 Nuts amzn.to/2RQ7N8F ali.ski/gA85S
- 6x M3x25 amzn.to/3vooHsC ali.ski/54h-s7
- 12x Momentary Buttons amzn.to/3zldfkU ali.ski/UntE8D
- 5x Rotary Encoder Half-15mm amzn.to/3cA9GgD ali.ski/Gqq5L
- 6x M5x40 amzn.to/3zmFFuK ali.ski/54h-s7
- 4x M3x30 amzn.to/3vooHsC ali.ski/54h-s7
- 16x M3x10 amzn.to/3vooHsC ali.ski/54h-s7
- 4x M2x10 amzn.to/3vooHsC ali.ski/54h-s7
- 2x Microswitch 12* 6 *6mm amzn.to/3vl46oY ali.ski/c6Pf3
- 4x 10x4 Magnet amzn.to/3zmS4P7 ali.ski/D1vOo6
- Arduino Pro Micro amzn.to/3pO3MOG ali.ski/-fTPxW
- 6x M5 Nuts amzn.to/3pW9MVC ali.ski/gA85S
- 6x M5 Washer amzn.to/35kss7G ali.ski/rs9rqY
Required libraries for arduino:
playground.arduino.cc/Code/Ke...
github.com/MHeironimus/Arduin...
0:00 Introduction
0:10 Processing of aluminum sheet
2:00 Sticking carbon fiber foil
3:27 Wrapping grips
5:25 Placing buttons
6:05 Sticking stickers
7:20 Mounting encoders
7:40 Placing the main hub
7:50 Making shifters
9:56 Electronics soldering
11:57 Completing assembly
13:00 Uploading arduino program
13:29 Enjoying driving with new wheel - Hry
Great project mate ! And video is super concise yet helpful for anyone who'd like to start building a DIY wheel
Great Project Dude!
Been struggling to with arduino for weeks now, thanks for this source code and wiring. This is opening so many new doors for me. Still trying to understand the code but a huge building block and example.
Damn bro, amazing job
great job , i already downloaded your files, all very good, , now i just have to start printing :)
Amazing!
Sorry to ask another question! i'm making some changes to the stickers for the wheel, could you tell me what font the 'TC' etc labels are above the rotary dials? Thanks.
Waw Fantastic work.
A question can I use the same setting even if I play console? I have a Playstation 4 and a Thrustmaster T300 wheel, I'd like to learn how to make my own custom chainrings.
Thanks a lot and congratulations
1 question how long do you need for the fr2x? Im waiting to drive 24/7 with it
can i know which program do you using for this tehnical sketch?
First of all congrats for the build, looks amazing.
If i wish to add clutch paddles to the wheel, do you know which changes i would need to make in the arduino for them to work?
Thank you
It depends, Do you want to make a digital 1-0 clutch or an analog clutch that you can smooth regulate?
@@Raidersky I wanted to use two potentiometers, so they would be analog.
Why do you cut the shape out of the carbon rap then add it too the plate? What i do is place a piece all over then trim off with a very sharp blade. Lot of work for less clean look
Awesome vídeo! I couldnt find the ino file in the description. Could You please share it?
hello I can put two rotaris instead of 5 without having to modify the arduino gt3
great project!!!!! solo una sugerencia, las agarraderas las colócate al revés, la cara toda tapizada debería ir al frente y la cara.con los tornillos deberían ir en la parte posterior, de esa.forma queda mejor
saludos
Just a thought But, you should make the main plate a 2 piece design and make it fully 3d printable for the people who do not have access to Metal and tools. Great video btw
I understand, but metal provide stiffness, to make it 3d-printable it has to be redesigned
Currently I can no longer find the code for the arduino pro micro to use for your steering wheel module. Can you share it???????
this also works on a logitech g29 on the ps4?
KW11-3z Microswitch ( 20x6x10mm (l * w * h) is too wide, I can't find the right size that fits.
is that 3mm or 5mm plate?
whens the fr2x getting released?
How much did you have in materials USD?
Will you make an f1 wheel in the future? Also with which wheels/ brands does this work
The wheelbase must be independent from wheel to work with this custom wheel, for example in logitech you need to make adapter, for thrustmaster it's work fine, for fanatec you need special hub
Can you provide the arduino sketch to go with this?
Possibility to buy arduino sketch only?
Hey man, I am looking for ages for a 5 rotor sketch, can you please send me the sketch for the pro micro. Thanks already!
I can't find the GT3 sketch, where is it please?
Does your zip have the code for button and rotary encoder? I wanna buy your project. Hope to see your answer soon. Thank you :D
👋, I was wondering if your arduino codes work for fewer switches and buttons. I was planning to make this wheel with less buttons (since I’m broke)
It should work, but I didn't test it
Did you do it? Because the buttons are pretty cheap i think
could you say how you connected all the buttons and the encoder to the arduino pro micro?
czcams.com/video/BlItglAxh5E/video.html
Hi, I bought the steering wheel please is it possible to have the list of screws and bolts you used to assemble the steering wheel?
Yes, all the parts are in the descripion
do you feel some flex in the alu plate forward and backward ?
Not while you driving, But If you really trying you can see minimal flex. But I'm my opinion this isn't the problem at all
@@Raidersky Hola buenas me puedes vender el sketch para el arduino pro micro
Hi, I've purchased the files and I am just adding everything to my basket on ali-express. I have hit a few speed bumps, the link for the M5 x 40mm caphead's only goes up to M5 x 35mm and I can't find any others on ali-express and also the link for the 2x microswitches brings up lots of options, please could you clarify which ones is it that need to be purchased? Thanks! Great work on the wheel I can't wait to build it! :)
It is 16mm lever microswitch
@@Raidersky Thankyou for your reply! The parts are being 3d printed and the aluminium being laser cut as we speak!
I have come to build the wheel and the microswitches are wrong! I cannot find the right microswitches online either! Even the linked one on Ali express are wrong! Help!
I'm sorry, it should be 12.8mm x 6.5mm x 5.8mm
Like this one www.aliexpress.com/item/4001040296033.html?spm=a2g0o.detail.1000014.5.3e9d4c1byzssdc
Whats the lenght of rotary encoder? 15mm or 20mm?
half-15mm
what is the Shifter you were using ?
It's included in the project.
Where can I get the arduino code
its been a while sence he uploaded im getting concerned
Great wheel but.. no funky switch, no party.
How did u get the colours of the encoders so on point? Spray paint?
I bought filament color samples pack for 3d pen and then I picked the exact color for stickers
I try to buy but it won't let me
Which wheel base fits with the wheel?
nevermind as I found this czcams.com/video/sYggCR02rkA/video.html
Hi, is this the design from Turn racing? :)
No, it's the Aston Martin GTE car wheel.... says so in the title....
@@imightbearacist6613 it's inspired by that car's wheel yes, but the design is indeed by turn racing, they're the ones who made the replica for the person who drives the race car irl
What do the "pro" and "cal" encoders do on the real car?
czcams.com/video/9MhKQhb6hhA/video.html&ab_channel=UnstoppablebyTotal
Here is a nice explanation :)
@@Raidersky woah thanks
FR2X RELEASE DATE?
Nice are you still making fr2x
Sometimes in my free time, but unfortunately is far from finish
ProjectNextRace I believe in you. Don’t rush the mod, take your time to create a beautiful car.
@@haydenchan6389 i agree
Will this work on a PS4 or just on PC?
Only on PC unfortunately
@@Raidersky any chance of a PS4/Xbox DIY wheel in the future?
@@jackamo1997 No, I don't think is possible
hi i buy your project but cant upload the gt3 code to arduino i have this problem could you hel me plz...
arduino_GT3:155:15: error: expected unqualified-id before '.' token
Joystick.setButton(rotaries[i].cwchar, 1); delay(50); Joystick.setButton(rotaries[i].cwchar, 0);
^
arduino_GT3:155:69: error: expected unqualified-id before '.' token
Joystick.setButton(rotaries[i].cwchar, 1); delay(50); Joystick.setButton(rotaries[i].cwchar, 0);
Try download the file again and try to update your arduino ide version. If you will still have problems contact me projectnextrace@gmail.com
schematic show 2 push button plus.. (min. 10.16)
I don'tunderstand why
It was a mistake, it is in the project files corrected
@@Raidersky in my project file is wrong
Schould be corrected, but you can just ignore this 2 buttons
Can we pay you to make one for us?
Depend where you from, if in EU then it is possible
PLEASE RELEASE FR2X
dude just wait, everyone is waiting for it
it also works on the ps4 on the logitech g29?
Unfortunetly not