How To Decant Spray Paints For Airbrushing - Easy !!
Vložit
- čas přidán 27. 07. 2024
- Get The Rhino Respirator Here amzn.to/3ECmO3X Join My Patreon Here / membership
Get The Grex Airbrush Here amzn.to/3rUoQEY
Get The Extreme Patriot Airbrush Here amzn.to/3yDX2bs
Get The Harder & Steenbeck Airbrush Here amzn.to/3T7spDS
Get Your Kits And Supplies Here clarksvillehobbydepot.com?dt_id=87406
Use Coupon Code BARBATOSREX10 at Clarksville Hobby for a discount
Get My Mecha Empire Panel Liners & Paints Here :
gundampros.com
Get Your Gundam Kits Here mechawarehouse.com
Get All Your Airbrush Supplies Here spraygunner.com?aff=10
Follow me on Instagram barbatos_rex65
On Reddit u/Barbatos-Rex
Email triggerfish65@gmail.com
Logo Opener by Free Music | / fm_freemusic. .
Music promoted by www.free-stock-music.com...
Creative Commons Attribution 3.0 Unported License
creativecommons.org/licenses/....
#spraypaint #Gundam #airbrush - Jak na to + styl
in the 80s my mother worked for Krylon, long story short i painted my whole truck with gloss black Krylon paint.. lol
Don’t shake the can. Let it sit for a few hours. Put a small hole in the can towards the top. Let all the gas out, then tape the hole shut and shake it up. Now expand the hole and cut the top off with snips. Pour out the paint. That easy.
Did this to an Army Painter primer can, whose spray cap was broken. Worked like a charm.
Thanks for the tip I brought a can of primer I sprayed it one time & the spray nozzle stopped working and it's a full can I wanted to know how to get the paint out so I can use the rest in my airbrush👍
How long does the paint last if put in one of those air tight jars?
Am I understanding correctly, am I to puncture the can itself? Or the nozzle?
@@SergeCruso the can! When it was sit for long, paint stays on the bottom, propellant at the top. Puncture the can, and only propellant is expelled, leaving only paint inside.
A brother-in-law taught me to spray into a 7” funnel cot it to your liking and let it drip in your jar works great for me and cover the top with a rag while spraying
Dude gimme a gundam build video! lol I wanna see the Barbatos Rex Customs!
Thanks for such a great tip. I've seen other people drill into the can to release the compressed air, but that pretty much means I have to decant the whole can all at once. I like your method of "decant-what-you-use". No drills, no fuss. Actually, no jars either if you're not inclined to decant a whole lot.
Hi, I found that a lid with a built in straw from an empty WD40 can will fit straight on some aerosol cans and you can slightly press the button to control the flow. I managed to fill some Vallejo dropper bottles using this method, you will still need to use the rag to prevent blow back though.
How convenient this video was uploaded. Just decided to switch to decanting my primers and clears so they don't only last 3 models.
I love the Kevin Costner style Intros of this guy
Me too 😉
Cheers, I always come away from watching these videos with a smile on my face, because I’m always learning stuff.
First video I ever saw was painting spoons with acrylic paint, for beginners, to learn how to use my airbrush. If I don’t know I know you do. Always watching, that sounds creepy, sorry. Thanks for sharing
Thank you for the kind words Karl
I have a Iwata Neo TR1 trigger airbrush. I love it. I haven't used an airbrush in three years and it's been so easy relearning with it.
Always good to see another vid on this. So many ways to achieve the same result. It is the staying clean that is hard. Tks for the vid.
i never would've thought of this on my own, ill have to try it soon because i have a bunch of spray pain. Great video
What a great video to show all the thinning of the paints for someone like me that’s new to airbrushing and I love how you showed us how to take the paint from paint cans and thin it out amazing. Thank you Barbatos Rex , I watch your videos every day, and save a lot of them to have as knowledge to help me start out and I can always go back and look at them to make sure !!!!
Thank you my friend
Fantastic idea! I was having issues with the Molotow Chrome spray. Was successful with the 1st batch I sprayed, but had issues with the 2nd batch. Going to try this out for my 3rd batch of parts!
This is a great tutorial! Thx for putting the time in to make it! Awesome!
I was just thinking if this could be done today....scary thought, but now I have the answer, thank you
I decant spraycans once they are near empty. I first flip the can upside down and press on the nozzle to release all the gas; then I hold down the can with my foot (with a large rock between the can and my foot) and then puncture the side near the top (on the flat wall side, not the dome) with an ice pick to let any remaining gas out. Once the gas is out I use some heavy duty scissors to cut the spraycan in half and pour the remaining paint into a jar. I was using small empty Gerber bottles to pour the paint into but i guess the seal wasnt as air tight as the paint dried in a few months, so i may have to try those mason jars.
tin opener on the base of the can, should be a little safer than the scissors. ;)
Try plastic wrap under the cap. Those food jars are vacuum sealed but don't seal as good after. Try a thrift store for used mason jars. A lot cheaper than new
I 3d printed a hood with a built in funnel and button that covers the top of the can outside of the crimp ring. It works great and I don't have to get splatters of paint everywhere.
When I get a chance, I will post it to thingiverse, and put a link here to the file.
Do you have the link?
Link????
I have been doing this for 25 years. Didn't think we needed a vid on it LOL. Great job anyways.
There are always new ppl coming to the hobby bro not every one has 25 years of knowledge in the hobby so I genuinely think you should make a channel to share some of the 25 years worth of knowledge to help all the new ppl bud 👍
If you flip it upside down and puncture it with a can opener, the gas comes out in a bow a minute and a 1/2. And then you open the whole thing up and drain the whole can and do anything you want so much easier.
oh man this is going to open a whole new world of colors for me to use! Thanks for the guide Rex!
Yes but your problem is mixing various types of paint on something that arent compatible! Just stop all this bs screwing around and buy a set of Wicked Air airbrush paints and be done with it! By the time you buy all these cans and extras, its a waste of time, money, and your painted item may not hold up to well with mixing different chemical paints together.
Hold the can upside down and let all the gas out....puncture a hole in top of can and allow paint to drain out into a mason jar you buy from some discount grocery store. Losely put the lid on, don't tighten down. rig up one of the cheap harbor freight pressure paint pots at harbor freight and put a vacuum fitting.....connect to vacuum pump. Put the jar down in pot, seal pot, and pull vacuum for a few minutes, this will pull all of the atmosphere out of the jar and seal it. Tighten cap and it will be good forever. Whenever you need some, shake it up, open it, get what you need, pull vacuum again and store it. BTW, pulling the vacuum on it will degass it automatically.
I really enjoy your channel. Keep up the good work I’m looking into getting into the hobby of airbrushing, but I love the soap in style airbrush because since I’m disabled, it is hard for me to clean with needles. Keep up the good work and I really really enjoy your channel.
thank you so much for sharing these great tips and tricks! theyre super useful
The way I decant paint is to take a new wd-40 straw and cut it up in 3 equal length pieces... Then I'll pop out the spray tip from the button and insert one of the straw pieces.... Makes life a little easier when decanting.... Give it a try....😉
That red and preshade looks amazing!
Yep, that simple way has always seemed to be the best way, great vid!!
Thanks for the decanting tip - will definitely try that one.
Thats the same way I've been decanting for a few years, unfortunately some folks think it needs to be more complicated lol !
Very helpful and can’t wait for the next vid
thanks for this, really helpful due to the hobby paint shortage in the online stores.
Great idea!!! I've been doing the exact same messy method with the cut down plastic droppers for years and hated every minute of it!
Great tutorial! Just tried this with a local brand paint today and it came out very nicely. This will sure help me save a ton of money since each 400cc can is only like 1.5$ a pop. Thanks for video, Rex.
Dang, how do you get spray paint so cheap? Over where I'm at uts 8.99 per 16 Oz can
Great content, and I love that Grex. Same one I use as my go to
That's quite the Gundam gam! I've underpainted minis with zenithal metallics and overcoated with transparent paint to achieve that effect.
If I have a can with a broken nozzle or I want to transfer an entire can, I just puncture the top of the can with a drywall screw, leaving a very tiny hole and let the can out gas. I then open the top of the can using a Swiss army knife can opener and pour out the contents into whatever canister I use to store it in. Plastic bottles with dispenser nozzles work quite well. I add a few ball bearings to the storage bottle to help with mixing. No spraying involved.
I do something very similar, but with a tight sponge, when I need a little and have no empty jars, but most of the time i empty the can with a hole at the top.
Your videos are awesome, Thorough. I always learn a few things and I build models for a living, 28 years fulltime! Your accent is a hoot. I'm from the south so I speak with a slight southern draw. Where would you say your accent originates? What accent? Yes, I say the same thing. Thank you for your dedication.
Great minds and all that.
Been using the rag method for a long time. I was surprised when you did it. I half expecred some contraption.
The way I do it now is to wrap a rag around the can and then place it under a piece of timber and lay the can flat. I then use a 1mm drill bit and drill through the timber into the bottom end of the can and expel the air out of the can. Once the air has all gone I then pour the paint into a jar and you end up with a fair bit of paint.
To get krylon foil red here in the UK is £41, crazy prices.
Heck Yeah!!!! That Makes Life Easier!!!! Thanks Man!!!! Your Awesome!!!!!
lovely video as always. great stuff
I like the grey primer as a finished color on certain projects.
If you are going to decant a whole can, turn can upside down press on nozzle only air comes out. When no more air put a hole in the top and pore out paint.
Love your shows my go to when need I looking for information
I might have to paint a gunpla the way you did that one piece. Awesome content as usual.
I just cut the cap on so there is only the nip u can push it and it pushes more paint out faster and less airmixing so it doesn't dry out
This tip is very useful.
Thank you very much👍
Yea have to try that this weekend
Enjoyed this video Makes it look so much easier and cleaner than anything else I have seen or tried I had good success with stretching a glove over the jar but still struggled with the connection of the straw and the nozzle always leaks to some degree so this should be a lot easier and cleaner Thanks for sharing Truly appreciate all you do and share for the modeling hobby 👍🏽👍🏽
By the way,that rattle is kids baby teeth, sold to the paint companies by tooth fairies. Hey, would I lie?
Keep a can of compressed air on hand I have one that’s used for cleaning out keyboards and PC fans when finished with the can take the nozzle off the can and use the compressed air to blow out the nozzle. You should be able to clip it onto the can. I keep all of my nozzles as sometimes I’ve had issues where I have gotten a can with a defected nozzle or it’s not one that’s easy to hold I just swap them out.
Thank you for all your testing. It is a great help! from Judy in Nova Scotia, Canada
Love your work man😊
Man I'm going to get one of those for sure I saw your video on that Badger it was a nice review. This is an informative video for sure thanks for share and yes paint is fixing to hit the roof. 🙂Thomas over at The Model Hobbyist
Personally I take an old nyquil cap(works great for mixing paint too). Just spray it into the bottom and it builds up then either use a pipe tre or pour it in
Great tips! 👍🏼
The metal flakes in the Krylon Foils and the Montana Silverchrome look to be in scale for our uses, but the Behr Dark Steal and some of the others do not. Some might not be too fussed about that, but I would be.
Thank you for sharing, I use a lot of paint and your idea will save me a lot of money thank you :)
I made a rig from a saddle valve in the plumbing section....it works perfectly for decanting paint and it's safe and clean... I even made a video on how the make the rig and use it.
How can I get to your video?
Awesome tutorial! Thanks for sharing this : )
You're welcome buddy 👍
Well that was easy!!! Thank you!
most spray can paints say on the back to turn upside down to clear the internal feed tube and knosell right? Well vent the propellent from can the same way and then pop a hole in the can and pore contense in sealable container, label and ur done.
You are awesome! Thank you!
I put a pinhole in the can using a sharpened trim nail to remove the propellant, then make the hole larger and pour into the jar.
I took a piece of 1/2 styrene tube . Cut it in half . Hold the one end over the paint nozzle and other end in the jar or cup. Press down an paint runs out the end of the tube into jar. No rag , no mess of paint everywhere ect . The tube is about 12 inches long .
This is super exciting, going to try it today. I have found the perfect color spray paint for a model I have built, however when I paint it with the rust oleium can it builds way too thick just like you said. I am going to give this a go and see if I can avoid burying all of my nice details. Thanks!
I always heard you need to let the decanted paint outgas for 8-10 hours. The way I was shown was to cover a jar with seran wrap and then puncture a small air hole for the outgassing pressure.
I never let to paint gas out when decanting I decant into a shot glass and the right in to the airbrush and have no problems
Excellent video. Thanks.
Thank you for your videos
I had a spray can full of paint but no air, I put 2 big nail holes, on its side, one at the top and bottom. Used a condiment bottle to push air in the top hole. I used a brush ( didn't have an air brush at the time) try at your own risk!
The fumes are my favorite
You should try to remove the white orifice in the spray nozzle and replace it with a suitable size of tubing. You can decant paint very easily then with the can upright, it doesn't spray, it's more like a water hose then. I've been doing it that way for years
Yep! I like to use the WD-40 straws....
You need to store that mask in a sealed bag, large feeezer ziplock works. IIRC it will filter constantly that it’s exposed to the elements. The secondary foam pads need to be changed more frequently then the charcoal filters.
I do the same for most projects.I’ve noticed it’s best to use only flats.Gloss clogs etc.I’ll My projects get clear anyway,cool video.
I fish mouth cut a fat straw and super glue it to the nozzle...tape the top of jar , slice a little x in the tape and insert the straw ...works very well and no mess ....I will try the rag method though might save on straws that way..
Thanks for the great information
Another informational video! I never even thought about this.
Thanks for the info I have been doing something like that for a while, made more of a mess than you did, I even tried water colors in my airbrush on top of automotive paint then when it dried thoroughly I cleared over it with no problem, worked great, been good for years. gotta keep the enamels and the lacquers apart they don't play well with each other. Rustoleum seems to be all enamel , I used one Rustoleum that said on the label it was Lacquer over a known Lacquer base and ruined a job (butter milk), it was not lacquer, my fault should have tested first, live and learn. Thanks again.
Love your videos. Great tip!!
Fyi, i just received My casubaris kit, it's awesome. Regards from Perú.
Hello from the US, enjoy the airbrush, it's a good one
I just went through this yesterday for the first time. I used a rag but didn't completely cover the nozzle. Got paint all over my hands and arms. But I will do it correctly the next time. Thanks for the tip
Another great video.
Just Awesome and thanks for this video. Best wishes from AR Diecast.
I have been removing pain from spray cans for over eight years now. I can remove all the paint in about one minute without a rag. It's fast and clean. And you don't need to spray it out the nozzle.
Please share.
I drill a small hole in the top of an unshaken can to let the pressure out, then make the hole bigger & pour the paint into a jar. Just be careful because the paint is like soda, there is gas dissolved in the liquid. If you shake it up it will spray everywhere.
This is how I do it, but I suggest using a tool to puncture instead of drilling. You don't really want little bits of the can getting in your paint and going through your brush.
I'd suggest just venting the propellant from the can- inverting it and holding down the button. I tend to get some "dead" cans sometimes with paint in them and no propellant left. Then using a punch tool, I just punch the side of the can and pour out the paint. I once used an oil filter cutter and just cut off the bottom of a paint can... worked great but took more time.
again...nice trick...I will try that
Thx,....
Instead of wasting the solvent of Spray Cans, Try using Fingernail Enamel Paints and build them up instead. Great Show!
Thanks, I have some spray cans that are the accurate tone used on TV filmibg sets, but need to use an airbrush for scale dioramas of them.
Great video.
One thing I did notice watching your videos. If switching to 1080p quality setting I get a better idea of how strong the metallic flakes are. Some are very out of scale for kits.
quite timely. i've been using the army painter rattle cans to prime my minies and have not been happy with them. been considering switching to an airbrush to, if nothing else, prime stuff. with this, i'd be able to put those AP primers to use
Thanks for another helpful video. I've seen modelers use a decanting sprays for years, often using this same approach just with out the rag which is messy. Sometimes the simplest method is the best.
For those that haven't heard, in May of this year(2022) Rustoleum, owners of Testors, announced they where raising the price of all Testors paints by 45%!! Not very hobbyist friendly. So the price on the item depends on the amount of back stock your suppler has. Current Retail in the 1/4 ounce (little square) bottle is $3.95, what the 1/2 ounce bottles where a couple years ago.
The intent, as reported by an "anonymous" RPM International employee, is to kill off Testors.
@@KevinJohnson-ge5xs I wouldn't be too surprised. It is a common practice in some industries, raise prices until sales drop enough to justify dropping a product line.
I've been decanting for quite a while. I only buy special colours.
But base colours are all rattle can decanted
Great video 👍👍
woow very useful tnks!
If you hold the can upside down and release all the propellant, you can just pierce the can and pour out the paint without making a mess, much easier than the method you are using.
i PUT ON LATEX GLOVES AND PUT MY HAND OVER THE CUP AND SPRAY IT WORKS GOOD FOR ME
Tip from a life-long mechanic who found out how to stop the paint cans from drying up in the nozzle: hold the can upside down and spray after use to get only propellant through the nozzle to clear it out - just like you would spray only air out of your airbrush when done and you'll never have a clogged up can of paint again... ever. Do it before you start too. It really helps
I used Rustoleum Flat White for my 1/144 Saturn V rocket and using the can was awful(you'd think I'd figure it out by now). I have the little Testors enamel bottles and used that flat white and it was easier. I have the Iwata Neo with a .35 needle/nozzle and it does ok for large areas. I may try this, but I like the small Testor's enamel paints.
this is a great idea!
Thank you my friend 👍