How to Configure Failover Cluster in Windows Server 2019 - Step by Step
Vložit
- čas přidán 5. 10. 2020
- This video explains how to configure Failover Cluster in Windows Server 2019 Step by Step.
Find the step by step procedure here
www.kindsonthegenius.com/wind...
These are the steps
✅ Set up the Network Environment
✅ Set up the iSCSI Cluster Disks
✅ Configure Failover Clustering Role
✅ Create the Failover Cluster
✅ Add Disks to the Cluster
How to setup up domain network here:
www.kindsonthegenius.com/how-...
How to setup iSCSI disks here:
www.kindsonthegenius.com/how-...
My website - www.kindsonthegenius.com
As a newbie system administrator I must say it's one of the best tutorials I've ever watched, also very clear instructions on documentations. Subscribed :)
Great! Fully neat and clean steps! All doubt got cleared, Thanks a Lot From INDIA
Great job with both presentation and delivery. WELL DONE!!!
fantastic illustration yet on the topic I have ever learnt.
This well explained... Thank you... I have question.. please how do one reclaim space on the shared disk back to the storage device. I have pending issue where after files are being deleted from the file cluster drive, the space is not reflecting on the storage. Thank
thanks for this explaining...for the iscsi i have some quest. if you don't mind
1-does using server instead of storage device is good ? no problem with it ?
2-could i first convert the physcial disk to gpt then spanning them to make for example one partition of 10TB ssd and then i start use it in the iscsi ?
3- if the 1 of ssd down i think all storage will down so how to make a mirror to these ssd disk to insure the safety
thanks again
Hi, thank you for the detailed explanation! One question - how do you make the storage node3 (storage node) fault tolerant? Am I right in undestanding that if node 3 (storage node) fails then the whole cluster fails as it has no shared storage?
Many thanks for the tutorial. I did not recognize when you have added the quorum disc to the cluster. ??
Thank you! Very helpful!
Glad it was helpful! and do remember to subscribe 😃
Very clear explanation
Thank you... Solid!
Good afternoon. First, congratulations for the video. I tried to do the configuration, but when doing the validation test before creating the cluster, the following error occurs for the two data disks (one on each server):
Physical disk xxxxxxxx is visible from only one node and will not be tested. Validation requires the disk to be visible from at least two nodes. Disk is reported as visible on node:
I tried creating the cluster anyway, and adding the disks later. Only they don't list it as an option, and then it gives an error. It's probably some kind of prep on the records that I ended up not doing. What can it be? Thanks.
Thank you, you explain things very clearly.
Can I ask you how you set up your lab environment? Looks like you are using virtual box. Seems like a great setup for testing. How much processing power does the host computer require?
This is nice question! You really need a pretty fast machine. I use VirtualBox on Mac(32GB Ram, 1TB SDD, Core i9) because I run many servers. But for 2 or 3 servers, i5 or i7 with 16GB or similar is okk
Please share all nodes config
Thanks for the Knolodge sharing
Thank you sir.
Every thing is described very efficiently but how to configure the client side with wsfc ?
Hi , i want to check if it's workgroup without domain can i still create the cluster? Anythings to take note.
thanks for this video
Good video. Now how would you fix a witness disk that has become corrupted. Knowing you cannot do a disk scan/file system check while the Disk is in use by the cluster.
thx for this content!
Glad you enjoy it! And do remember to subscribe 😃
thanks buddy make it simple life
Nice.
Very good
excellent !!!!!!
Getting error "The Node cannot be contacted. Ensure that node is powered on and is connected to network"
the both node is online and its pinging too T
ell me the solution please
helllo, there are totally 3 node and 1 failover cluster, so the cluster just taking backup from node 1,2,3 to failover right ?
Hi Kindson.Please could you help me with an error on failover cluster in Windows Server 2022 validate configuration error, it is a network error. Kindly let me know the best way to connect with you. Thank you in advance.
I thought the storage disks were located on Node 3. The disks added were from Node 2.
Hi, we are using cluster due to unexpected restart of data centre now SQL node 1 is working fine but on node 2 SQL server service s not running.error 1067 .The process terminated unexpectedly.any solution
Hi Kindson, how do you setup system info on screen of each of nodes?
You can use the BgInfo application. Get it from here docs.microsoft.com/en-us/sysinternals/downloads/bginfo
Let me know if this solves your problem
Thanks a lot
Most welcome
HI,
I Have followed your tutorial but I have a problem when I try to validate the clusters .Cluster one can not find cluster two even though they are on the same domain and can ping each other..I get a mersage "the node cannot be contacted ensure that the node is powered on" even when the node is on.Any solution to this problem?
Is it possible to create File Server replication with nodes running different versions of Windows server? Windows 2012 / 2016 / 2019 on the same domain.
This is an interesting question. I'll check this out
Hi kindson,
have to give same configuration as node 2 also??
Yes, exactly
I did not quite get it. You used the disk of Node 2 as clustered disks instead of the "node 3". You also did not join the "node3" in the cluster which is supposed to have all the disks(storage node).
Hi Mr Kindson, I'm trying to create cluster but I'm having error while naming the cluster : "unable to determine if the computer exists in the domain . The username or password is incorrect.
Tried to creat two VMs for node 1 and node 2. But in Failover Cluster Manager validation they cant see each other. What could be wrong? Do I need AD or Domain Controller?
Make sure the network adaptor on all participating Nodes including your Domain Controller is set to internal then apply and OK. this will allow all nodes to communicate together internally. Go to file on top left of your VM and click on settings, you will see Network Adaptor on your left. make your VM to by smaller(minimize) so you can see the file option on top left. once done, try to ping all 3 nodes from each VM. External Adaptor will bring internet from your home to the VM and Internal will take internet away, if you need internet temporarily , then flip to external then return it back to internal once you are done downloading or using the internet
What happens if NODE 3 server or a domain controller server fails? :D
Hello , can you help me for this message and how to resolved this, please : " there was an error cleaning up the cluster nodes.Use Clear-ClusterNode to manually clean up the nodes." Please help me to resolved this error
why when creating a cluster, on Access point for administering a cluster, didn't ask for an IP address?
pls sir can someone also add as many nodes as possible or it is just two node...
Hello thanks for the video, its been so helpful to me. but i can not find the fail over document from your website! thanks.
Which one? The PPT or the web page?
@@KindsonTheTechPro Hej, thanks for the respond, i finally found it. I just did not look around enough.
hello sir, can i use this software for a project. if yes, how can i install the software. pls it is urgent...
When i wanna add node2 this mag appear "you do not have adminstrative privileges on node2.local"...
The 2 nodes not in domain
Is there any step for this ?
Thanks
It i just as the error says. I think you're trying to add a node using an account without and admin privilege in the DC. Let me know if you fixed it
I got The same problem, but i really sure i using an acount with admin node@@KindsonTheTechPro
I got the UDP error and the Validation tests failed. I disabled the Firewalls and tried everything. Just can't pass that step.
And what happens if the physical server (DC) fails?
Databases will become unavailable until the failed server is repaired. The disk hosting the database files should have redundancy measures in place such as storage replication technologies. If the SQL Server cluster is configured with failover clustering, the cluster will detect the failure of the server hosting the disk and initiate an automatic failover to another server in the cluster. The failover process ensures that the SQL Server instance remains available and that the disk resources are accessible from the new server
facing error 5398 and 1653
how to fix the DNS error you got ?