GL1800 Rear Ultra Flash LED Conversion | PathfinderLED | CruisemansGarage.com | 2020

Sdílet
Vložit
  • čas přidán 12. 09. 2024
  • I install the GL1800 REAR ULTRA FLASH LED CONVERSION kit onto a 2016 Honda Goldwing. This LED conversion kit will fit any 2001-2017 Honda Goldwing. You can order using the link below:
    ▽ ORDER PATHFINDERLED: bit.ly/UltraFla...
    ▽ DREAM MACHINES: dreammachineso...
    Chris Caliente Video: • Goldwing LED Flasher a...
    VIDEO CHAPTERS
    2:04 Install LED Flasher
    16:34 Install Lower LEDs
    20:36 Install License Plate LED
    21:48 Ultra-Flash LED Demo
    ▽ GOLDWING MAINTENANCE VIDEOS: cruisemansgara...
    ▽ CRUISEMAN'S AMAZON STORE: amazon.cruisema...
    PRODUCTS I USE TO MAKE MY VIDEOS:
    GoPro Hero 8 Black: amzn.to/2YZU2Ul
    Rode Wireless Go: amzn.to/3fUxMCh
    Panasonic G85: amzn.to/3dv5oVA
    Purple Panda Lavalier Mic: amzn.to/3hNTPMJ
    RAM Reservoir Mount: amzn.to/313M7bk
    SureWo Helmet Swivel: amzn.to/2ARoacF
    360 Degree GoPro Mount: amzn.to/3fOQhb5
    Ultra-Thin Studio Light: amzn.to/2CsfNVa
    Video Lights (used for maintenance videos): amzn.to/2zVooyM
    Cruiseman's Garage is a video production company that specializes in motorcycle maintenance and aftermarket accessory installation and review videos. Our maintenance video series for the Honda Goldwing is in use by thousands of Goldwing owners in more than 21 countries worldwide. For more information on Cruiseman's maintenance videos for the 2001 to 2018+ Honda Goldwing, go to cruisemansgarag...
    For more information on how your company can benefit from a Cruiseman's Garage installation and/or review video of your motorcycle-related product,
    go to cruisemansgarag...
    Cruiseman's Social Media:
    Facebook: / cruisemansgarage
    Facebook: / goldwingmaintenance
    Twitter: / cruisemangarage
    Instagram: / cruisemansgarage
    Forum: theglforum.com
    Website: cruisemansgara...
    Email: cruiseman@cruisemansgarage.com
    Background music under license from Epidemic Sound
    Cruiseman's Media Kit: www.cruisemans...
    For sponsorship, product reviews, and collaboration, you can email me here: cdikmen@cruisemansgarage.com
    #cruiseman
    #cruisemansgarage
    #hondagoldwing

Komentáře • 46

  • @cruisemansgarage
    @cruisemansgarage  Před 4 lety

    I accidentally put a link in the description of this video to the wrong product. Here is the correct link: bit.ly/UltraFlashConversion

  • @owlexS
    @owlexS Před 7 měsíci

    I super appreciate the level of detail you go into, even showing pieces after they're off so you can understand what you're blindly dealing with during disassembly.
    I just did my gl1800 air filter for the first time yesterday and the video I watched from Partzilla was incredibly disappointing with their lack of detail. Everything I continually wished they were doing in that video, you did here. I'm confident that if I had watched a videos from you about doing the air filter, I would have done it in less than half the time.
    Thank you!!

  • @user-ol1hf9ox1c
    @user-ol1hf9ox1c Před rokem

    Cruiseman: I'm a recent subscriber to your channel. I've watched a few of your older videos and I took your advice on a lighting upgrade. I installed the Pathfinder LEDs on my 2004 1800 Goldwing, including the rear running lights, brake lights, front and rear turn signals and high and low beams on the headlights. What a difference. I especially like the flash feature of the LED brake lights. I was out earlier this week in the evening and I got flashed by an oncoming car that apparently found my lights too bright on low beam. My reaction: GREAT!!!. He not only saw me, he noticed me. Thanks for the good work with your channel. Keep it up. Peter in Santa Fe.

  • @duanetucker2731
    @duanetucker2731 Před rokem

    Adding to a comment posted two years ago, I also couldn’t quite get the flasher module installed the way shown in the video because apparently my hands are just too big. I loosened, but didn’t completely remove, the gauge cover by taking out the left and right pockets, unhooking the rubber gaskets from both windshield release levers, and then unsnapping the gauge cover from the dash. I could then easily remove completely the plate on the front of the bike instead of propping it open with towels, giving me total access to easily install the Pathfinder flash module. Only added about 10 or 15 minutes to the job but it is well worth the time!

  • @bobedmunds3595
    @bobedmunds3595 Před 3 lety

    I just installed these LEDs on my 2016 Goldwing and I have to stay wow what a difference they make. And a very easy install. Plus the bonus of them pulsating. Thanks for the video keep up the good work

  • @da72ma
    @da72ma Před 3 lety

    I used a combination of the dash (Caliente has the video) and the Cruiseman frontal method. That was super easy and gave me the opportunity to clean it all. So a little bit more time consuming approx 15 min but no fidgeting... That flasher came in and out in 3 minutes... great video...

  • @TDanimal1
    @TDanimal1 Před rokem

    Just bought a 2012 GW and been watching some of your vids, you do a great job Cruiseman‼️

  • @danrahn9863
    @danrahn9863 Před 4 lety +1

    I do have a 2018 Honda Goldwing Tour DCT, but I was curious, so I looked at this video and I noticed that into the 14th minute of this video, I believe the designation of the two connector ends were reversed; 2001-2006 would be the bottom connector and the upper connector would be for 2007-2016. 2006 was used in the description of BOTH connectors.

  • @jamesrenfro799
    @jamesrenfro799 Před 4 lety +2

    Good job looks great but think one of the brake lites on trunk is in wrong socket. One on right is on outside and on left is on inside.

    • @cruisemansgarage
      @cruisemansgarage  Před 4 lety +2

      You are correct. I noticed this after watching the video clip and corrected the LED placement, but the video I shot after the fix did not come out. Good catch!

  • @leelavinder2231
    @leelavinder2231 Před 4 lety +3

    Love the video, but I have to ask. Why is the right section of the left light lit up and the right section of the right light lit up? I’m ocd about this stuff. Have a great day!

    • @cruisemansgarage
      @cruisemansgarage  Před 4 lety +2

      I had the LEDs on the left side reversed and did not notice it until after I shot the video. An easy fix.

  • @willtopower2158
    @willtopower2158 Před 4 lety

    Hey Cruiserman, great video and I started installing the kit today. I just could not get my hand under the shield that you held up with towels. I ended up removing the entire shield by undoing the 2 allen nuts holding the gauge cover and then removing the two nuts holding the dash down below the mirrors and then I was able to remove the entire assembly including the dash pad, Lots of room then, I could see everything and did the swap easily. Thank You!

  • @asianman4250
    @asianman4250 Před 2 lety

    There is something wrong on those rear brake lights. The out lights should probably stay on not the right on side. This makes the inner of the left rear light, and the outer of the right side on.
    I believe the left and right outer sides should stay on, and with brakes all on.
    Just an easy fix, but you should correct it in case you haven't

  • @EmsillCazm
    @EmsillCazm Před rokem

    Hi Cruiseman …. Why do you recommend that the LED flasher unit is installed by a qualified Honda technician on the Air-bag model Goldwing

  • @MrEurophenom
    @MrEurophenom Před 2 lety

    Need more videos on gold wings made before 2018..

  • @EmsillCazm
    @EmsillCazm Před rokem

    Hi …..Why don’t you recommend installing an LED flasher unit on a Airbag model Goldwing?

  • @handydoc2531
    @handydoc2531 Před 3 lety

    Fantastic video. Are there torque specifications for these nuts, bolts, and acorn nuts? I have been accused of over tightening in the past.

  • @docmac249
    @docmac249 Před 2 lety +1

    Hi Cruiseman, I have a 2006 with an airbag. Why is it not recommended to do the install myself please?

    • @EmsillCazm
      @EmsillCazm Před rokem

      Hey docmac ….. i’ve just asked the same question, In the mean time did you ever find out why you cannot install the LED flasher unit yourself ?

  • @emmettrowe5164
    @emmettrowe5164 Před 4 lety

    I ordered these lights after looking at your video If you made the mistake of this product and gave us a link to the correct product you should have given us also the part number for the correct product so that we could confirm the right product because when I went to the link that you sent for the correction it shows the same exact LED lighting

  • @gauteberg1351
    @gauteberg1351 Před rokem

    the pathfinder rele is not ipx standard, in 3-5 year in scandinavian clima they are broken, and must replaced.

  • @christopherkelley78
    @christopherkelley78 Před rokem

    Hey brother I live in Waxahachie how much would you charge me to do the same thing to my 2008 Goldwing trike?

  • @simontemplar8682
    @simontemplar8682 Před 4 lety

    It does look much better from behind... but seems like a lot of work n time spent

  • @cactusstudiossouth
    @cactusstudiossouth Před 4 lety

    Hello friend I would like to remove the two CB radio whips from my Goldwing what's the best way to get started?

  • @BertDVS
    @BertDVS Před 4 lety

    How do you eliminate the RF interference of Pathfinder LED bulbs? I did the full set, including headlamps. I am super visible and bright now, but can’t get FM anymore with lights on. 2008 GL1800.

    • @cruisemansgarage
      @cruisemansgarage  Před 4 lety

      I did not have that problem on my 2012. But, I think someone makes a filter for radio interference.

  • @emmettrowe5164
    @emmettrowe5164 Před 4 lety

    PS also my friend I ordered this set of ultra LED lights and also wanted to order those special turn signal lights for the front of my 2009 Goldwing but you never replied to my question asking you if I needed to change out the Flasher again for the front special turn signal lights or if the Flasher that's installed for these Ultra lead tail lights will be sufficient for both..?????

    • @cruisemansgarage
      @cruisemansgarage  Před 4 lety

      If you have replaced the flasher with an LED flasher, you do not need to change it out.

  • @redvaquero
    @redvaquero Před 4 lety

    Am I missing something? I do not see the link for Caliente vidio.

  • @59dutchman
    @59dutchman Před 4 lety

    I have a F6B. 2016. No trunk do they have a kit for for mine

    • @cruisemansgarage
      @cruisemansgarage  Před 4 lety

      Yes. All of the LEDs are available individually. socalmotogear.com

  • @davidtedrick8509
    @davidtedrick8509 Před 4 lety

    Will this kit work if I have a wig wag installed already?

    • @cruisemansgarage
      @cruisemansgarage  Před 4 lety

      Depends on whether or not the wig-wag supports LEDs.

    • @davidtedrick8509
      @davidtedrick8509 Před 4 lety

      @@cruisemansgarage all my front lights are led and have an led flasher, that's why I didn't know if the wig wag would work cause you say these flash on their own. Thanks.

  • @bubblehead7680
    @bubblehead7680 Před 4 lety

    Does that relay affect the lights up front?

    • @cruisemansgarage
      @cruisemansgarage  Před 4 lety

      Yes. One flasher controls front and rear turn signals.

    • @bubblehead7680
      @bubblehead7680 Před 4 lety

      @@cruisemansgarage So is there no issue with the front being incandescent and the rear being LED?

    • @cruisemansgarage
      @cruisemansgarage  Před 4 lety

      @@bubblehead7680 None

    • @Albert_Pipers
      @Albert_Pipers Před 4 lety

      Thanks for the great vid 👌

  • @ghost9119
    @ghost9119 Před 3 lety

    Is there plug and play harness to make both four bulbs on all times?

  • @ghost9119
    @ghost9119 Před 3 lety

    Which way is easier to replace LED Flasher. windshield side or Dashboard side ?