Thank you guys for checking out the video, and hope you found it useful! If you are looking to spend a little more money, I made another video about a very simple and extremely portable IEM system that I use most of the time I travel for gigs or whenever I don't want to take my Sennheisers out of the rack. Check out the video here: czcams.com/video/0WT9fHqVzZg/video.html
@@christianpucciarelli It works great! But you have to realize this is a wireless IEM "hack"... this isn't a normal way to use IEM's. If you are truly interested in IEM's and you have to get stereo, and you are super picky about your tone, this isn't the video for you. Gotta shell out the money if you want that! This is a trick to save money.
The comment about cords around your feet hit home. Im even picky enough to clean around my spot on the worship stage I play on. Cords, Mic stands, monitors. Got to move it all every week. Don't know how it's always in the way.
Thanks for the video man! I was about to build something very similar and I was a bit unsure about how would the wireless receiver and the P2 behave together so your video just confirmed me it works. Great tips and gear recommendations. Thank you for sharing!
Great video. Love the diy aspect. Thinking of using this in rehearsal to take the mixing desk aux out to my shure in ears rig instead of the ridiculously long cable I’m currently using!
I've tried this and it works great in my garage. Will try at a gig next week. I went with the lekato wireless that runs on UHF frequency so it wouldn't conflict with my NU-X B5RC that runs on 2.4ghz. only difference I can tell going wireless is it almost seems like there is a noise gate or something. I don't hear the first click of the click track but I do when hardwired with a cable. Weird. Small price to pay for being able to move around and not trip on any cords.
I had to change it up a bit from yours because I had the PM1 but I just purchased the Stereo female to xlr male adapter instead and was able to obtain the same results :)
I am using a BOSS WL-50 transmitter + receiver set FROM my guitar INTO my Digitech RP360 effects processor/amp simulator. And then a BOSS WL-20L transmitter + receiver set FROM my Digitech RP360 and finally INTO my Behringer Powerplay P2. The BOSS WL-50 and WL-20L work seamlessly and without interfering with each other. You just have to remember to "pair" each set's transmitter to the proper receiver before each session. Coming OUT of the Digitech RP360's stereo 1/8" output jack via a high quality 10' long, 1/8" to 1/8" patch cable, I then use a high quality 1/8" female to 1/4" male adapter going into a high quality 1/4" female to 1/4" female line connector, with the WL-20L transmitter 1/4" plug going INTO the opposite end of the 1/4" female to 1/4" female line connector. The WL-20L receiver is then plugged directly INTO the Behringher Powerplay 2 with, of course, a pair of high quality studio headphones coming OUT of the the Behringher Powerplay 2. (The pocket clip on the Behringer Powerplay P2 is super-convenient.) This is how I practice at home. All together this cost significantly more than $100 but I chose to go this route because of the versatility of all of this gear if I want to set up differently, for instance, using the BOSS WL-20L and the WL-50 to go wireless with two instruments simultaneously (me and a collaborator) or even to go wireless with one instrument and, by way of a XLR to 1/4" male converter, one mic. Haven't tried that yet but I COULD without paying $300 for a BOSS wireless mic receiver/transmitter set. (Which I probably will do anyway because I'm sick. SICK, I TELL YOU! This is what Sweetwater can do to a person. Guard your Souls, friends....)
Do you have to use the headphone amp or can you just use a quarter inch adapter on the receiver and adapt the quarter inch to eighth inch headphone Jack?
As long as you have a way to turn up or down the volume of whatever the wireless receiver is plugged into (so you can control volume of your IEM mix), you can use whatever you would like 👍
Glad to help! Also just keep in mind that the more of these cheap wireless you have next to each other, the more likely they are to get dropouts. Using 1, or 2, or 3 are usually fine, just don’t put them right next to each other. That’s part of the reason IEMs and wireless have different price points... the higher the price, usually the more units you can use at once
Does it works? I have the same mixer, , I did with the aux and cable but doesn’t have enough volume, cuz is “line level”, I’m wonder if it works with this, I’m doing it wired
Dude... I HATE cable tangling. For the band we have sweet Sennheiser in ear system but at home... I'm tethered by cables... Tried blue tooth but even fast transmitters have a lag. Recently nabbed this wireless system on your recommendation and it's great. Maybe a shade bright but definitely workable until I'm willing to pony up for Sure. My first thought was to get another pair and reverse it for the home cans. Beat me to it haha. I would have just gone to a cable adapter but think you're spot on with the in ear amp for volume control. Great videos. I appreciate the work you've done to try these all out and share your experience. Thank ya sir!
Dude, I still use my wireless at home! I absolute hate being tangled in cables. Even when I do solo acoustic (looping) sets, I have a wireless mic, a wireless guitar, and wireless in ears just so I'm not tethered haha. It's kind of an obsession! Glad you found the videos useful
@@ScottUhlMusic Any suggestions beyond the P2? They're pretty much out everywhere. Next jump up I see is $80 or more. Side note... I thought I'd get around the need for the monitor amp with a series of adapters. It worked but sound was like 30% of what my cable was. I asked our sound tech what he thought it might be. "Um, that little thing can't push enough power to run cans." Power... something taken for granted in cables that I didn't eve consider lol.
@@crocholiday Yeah I need to look into other options. My drummer broke his P2, and had to order a new one and it's been on backorder for over a month. It's just now arriving in like 2 weeks. I'll have to look into other options
First of all you make amazing content🔥 and i wanted to ask that if i use 3 of these can i have seperate mixes on all the 3 and have click track and backing tracks going on and if yes how ;please explain or make a detiled video as there is no input on these transmitter so splitter will also not work?
Thanks! I wouldn’t recommend using 3 of these, but it’s definitely possible that it could work. I would watch this video: czcams.com/video/kUNBHi5F3aQ/video.htmlsi=rrcAFKOeJUvwS6Pj And this video for in ears: czcams.com/video/XQjFhkQTVP8/video.htmlsi=3OstdXzKgh32FI1A and this one for backing tracks: czcams.com/video/UmbdfJpxiIE/video.htmlsi=h-LD1o2B0Ud0RY23
Hi Scott. Thanks so much for this. It just might save me a lot of money! 🤞 I just have a couple of questions please... 1. Is it possible to have multiple members plug in these devices and not interfere with each others signal? 2. You often have a 'cons' section to your videos. What is the con with this set up please? Many thanks in advance. 🙏👍😁
1) you can, but I don’t recommend using a ton of cheap wireless all at once. See this video: czcams.com/video/Xgw96rY4TAc/video.htmlsi=m7nhnk-wsvTfgaQD 2) this isn’t really how IEMs are meant to be used, and you can get pretty afffordable stuff now without this hack. But again, the more cheap wireless on stage at once, the more likely they will get interference. But I also go over that in this video: czcams.com/video/Xi2JcMomjQ0/video.htmlsi=7uVBzNBbvjbVPSxa
@@ScottUhlMusic Thanks so much Scott. I actually watched your top 5 things you get wrong with wireless systems right after this and saw that the exact question I asked was in the list! 🥴😂😬 Thanks so much for taking the time to reply and top notch channel! 👍
Great video! But wouldn't the guitar still have to be wired? Unless you use a second wireless transmitter and receiver for the guitar to be completely wireless? If I've missed a step please help me to see it 🙏
Thank for the video! When practicing with the band I can image i'd just insert the wireless receiver in the P.A. But when we play live the distance between stage and FOH might be a few meters. How will this affect the signal? Of should I be able to connect the transmitter somewhere onstage? Thanks!
Range always depends on the conditions of the venue. And with cheaper wireless gear you often do get less range. I believe these will be good for 50-100ft in good conditions. So it will depend on the show and the wireless environment at the show. Remember, this is an IEM “hack” to save money. It won’t work in every single scenario. If you need a full on IEM system, you can still get some for pretty cheap now 👍
Bought the P2 on your recommendation and it works nicely, so thanks very much for that. Was looking for an affordable solution to very annoyiong cable problems. I already had a 2.4Ghz Getaria for my bass so though I would try it with that before buying another for the IEM's. Has a little bit of static noise or interference so I will be purchasing a more expensive 5Ghz set to hopefully sort that problem out. Sidenote, I ony have a couple of phones/tablets in my studio using wifi, other than that there are no wireless signals in the room at the same time.
5.8 should be better, but… just remember this stuff is cheap for a reason, and this is a DIY hack for and IEM system. It works for sure, and I’ve giggled with it… but if you want a really good one, you’ll need to spend the money. This is usually the one I recommend to start with for beginners since it’s not very expensive at all: czcams.com/video/dJL_zI2drRQ/video.html
If you plug the transmitter into a headphone's out of a device....would you really need the P2 at the receiver end?....considering your having an adaptor to plug my headphones into the receiver.
If you don’t mind going to the transmitter to turn up or down volume. The way to turn up or down won’t be mobile on you in that case. But yes, you could do that if you wanted 👍
Whats the difference between the Xvive4 receiver and trasnmitter and the behringer P2... i don't really get it... the behringer p2 doesn't have a transmitter?
Hi - great video. This is exactly the kind of solution I was looking for, but I have one question. My planned setup is a little different than yours or probably most others, as I do not plan to use my band's mixer as my in ear feed. Mostly because I am only using this for band practice - not gigs. For our practices, the only things that run into the PA are the vocals and keyboards. Guitars, drums and bass are all separate. What I am using currently is a Zoom H2N recorder. I set it up a few feet away from me and it's condenser mic picks up all the instruments and I use its headphone jack output to connect to my Shure ear buds. It works great, but I would like to get rid of the headphone cable by adding the Behringer P1 and the Amoon wireless system to my setup. So my question is - can I simply plug the Amoon 1/4 jack into a 1/4 to 3.5mm adapter coming out of the Zoom mic's headphone out? The issue I am worried about is that the headphone out is stereo, whereas the 1/4 jack is obviously mono. Thanks again - your video was great - easy to follow and your solution is very creative and can save people a lot of money.
Glad you liked the video. To answer your question, yes it would work. I’m not sure how the stereo to mono would work, as sometimes when you do that you will get only the left or right side. You could also use the adapter out of the P1 as well if you wanted to do that. Also at that point, a cable might just be better. But either way, using a 3.5mm to 1/4 adapter should work no problem. 👍 the mono might be the only problem if you have any
@@ScottUhlMusic AH ok - so you're saying that if i use the adapter, it might only send a sound signal to either my left or right headphone? Maybe this would be counteracted by using the P2 in mono made....
I haven’t used the Zoom before this way, so I’m not 100%, but I’m pretty sure you would be ok 👍 There’s always the Amazon returns if it doesn’t work :)
Great f video. I am new to monitoring and just got the Behringer P1, and it's a bit easier since I just want to monitor my voice straight from the mixer. Thanks a bunch for the explanation man, I was trying to look for a video that was detailed enough to understand how to do it, so far this is the best video I've seen. Can I then buy the nux b3 and be entirely wireless? Thanks a bunch and greetings from Colombia, South America
Awesome content! I also have the amoon 5.8Ghz version, it's super awesome. I just have one question, I noticed that the 1/4" plug is mono, if you're gonna use it for IEM, you just hear a mono mix sound?
I haven’t heard of that one, as a ton of companies are making these cheaper 2.4 and 5.8 ones. But a lot of them are very similar. I just really like the Ammoon one
Hi, thanks for presenting this solution. I'm searching a wireless setup for silently practicing with my electric violin at home, running it through my amp. As non-DIY Setup I thought of a Line6 G10 for violin>amp & Xvive U4 for amp>in-ear, which would end up at ~400$. Line6 G10 only because it's highly recommended in violin forums, since I heard that not all transmitters work that great with piezo pickups, since they got a high impedance. If I instead try this budget solution, could I use 2x ammoon transmitter for violin>amp & amp>in-ear or are there interferences to be expected? Would you recommend these transmitters for piezo pickups?
I do not believe the G10 works with piezo pickups, but I could be wrong. You could go with 2 Ammoon ones. Use the black one for the violin and the red-ish one for the IEM system 👍
Hi! I want to do this, and I already have 1 Ammoon system, do you think I will have interference problems if I perform with 2 pairs (one for my guitar and one for my inears)?
All wireless depends on the environment, but I think 2 wireless shouldn’t be a problem. Maybe get the red/wood one and the black one as a second one just to be safe 👍
Hello! I currently use this technique (Behringer P2 and Ammoon A8 with XR18 console) and I currently have issue, audio starts cracking at higher volume. But if I set volume too low on console output, the transmitter's noise is too noticeable. Is there any way to solve this?
There are many possibilities. This is a diy hack and it’s not a REAL IEM system. Since making this video I have found this which might help: czcams.com/video/UorLl_vxYA4/video.html
what'd happen if you just use an adapter to connect the IEM's straight to the receiver? You wouldn't have a personal volume adjustment but would it work?
Yeah the wireless xlr would work well for this. Although the Xvive also has the U4 which is actually an IEM system: czcams.com/video/YsMtzSuDH-w/video.html
Hi Scott, great videos and very useful info here on your channel.. Can you recommend an updated option instead of ammoon - 5.8ghz to use it in yhe same combination as a cheap IEM sistem with the Behringer P2? What about the SWIFF AUDIO WS-50 or Lekato ws-70? Thanks in advance.
Yes, either the Swiff Audio or the Lekato ones will work great too. I have a lot of them listed in the description... all of them will work great with this setup. Cheers!
I went to try this setup and the P2 of course is backordered so I thought I'd try the EM1. I am wondering if because you can't change mono stereo on the EM1 I am not getting a signal at all. I saw your other video for that Nux B7PSM and might just go that route, but still wanna know what I did wrong here haha! Your videos have been very eye opening and helpful!
You should get signal still even without the mono/stereo switch on the EM1, so something else is likely wrong. And you can get a TRS male to TS female adapter for very cheap
hi there! I tried a similiar thing with the black amoon 5.8 MHz through a *passive* beltpack. Way not loud enough. Does the active one do a great job??
What size rack do I need for everything? I’m going to start piecing this together. This on on my list and might be missing something. Behringher 2u. Power 1u. Splitter 2u. In ear wireless 1u. My guitar wireless 1u. My helix 2u. Power amp 1-2u. Leave a space for router?
Hi Scott - thanks for this very informative video I have a Line 6 pod go. Can i use a wireless guitar system to play wireless and use another wireless one as a IEM like you showed in your video ? Or do I need only one ? How do I connet those pieces ? - Thanks a lot!
Yup you can do that for sure. One wireless from guitar to pod input, and one wireless from pod output to P2 or any other headphone amp for a DIY setup like this 👍
Hi Scott Love your channel. Thanks for taking the time. I'm setting up a new home studio. Like you I detest cables so I'd like to go wireless monitoring/recording. I have a decent budget up £1000 ($1500) Input 1 Guitar to amp (wireless) Input 2 Guitar Amp to mixer/interface (wireless) Input 3 Bass to amp/pedal board (wireless) Input 4 Bass amp to mixer/interface (wireless) Input 5 Mic to interface/mixer (wired) Output Mixer/interface to wireless IEM (wireless) So I make that 5 lots of paired units with as close to zero latency as possible. Do you think the setup you mention in this video with the Behringer pack would work or could you recommend another? The idea is to have everything connected permanently to make workflow as straightforward as possible...just pick up, play and monitor with zero sound being emitted beyond the in ears. Thanks again
I think that should be fine. If you start compounding wireless that’s where you can start getting latency, especially with cheaper ones. I’m assuming bass and guitar amps are separate. Buffer size might be an issue, but I think it would work 👍
Hi, interesting idea! I have a Zoom L-12 digital mixer which has 5 monitor outputs with built in headphone amplifiers, so up to to 5 musicians can have individual in ear monitor mixes. Would it be possible to use a plug and play wireless guitar system to have wireless in ear monitors with my mixer? I could plug the transmitter into the mixer, but how would I plug my in ears into the receiver, since they're both male jack connections?
hi Scott . Do u know an easy way to convert stereo to mono audio? in case to take the output from headphones..to use this method... and 2nd what happend if u connect xvive u4 to a stereo output? the xvive convert/sum stereo to mono signal? these are my 2 choices for iem. I like nux iem but too many bad reviews on that. by the way very informative channel..
You basically have to set it to mono from the mixer (or wherever you are getting the signal from). You need to make sure something converts it to mono, like that switch in the P2 i mention here. Glad you’ve enjoyed the channel! 🤘
Are you not using a limiter or do you know of options for only a limiter in a setup like this? I have a submixer on stage and from there i can go in my iem but im scared without limiter...
Thank you very much! I have a question. Would you recommend using the headphone out into the wireless transmitter or using the DI out of my amp? Considering I just need to hear myself. Thank you very much!
You’ll need a headphone amp no matter what to adjust the volume. Whatever it’s coming out of. Just always watch your ears, since this is a DIY hack and not a normal IEM setup 👍 Always test it on low low volume first
Hi, thank for this video, it's exactly what i'm trying to do! I already have KZ in ear earbuds, guitar wireless CUCAVE 5.8 (ammoon rebranded). I want to use the "line out" output of my guitare amp (that do not mute the amp speaker) to send signal to this in-ear setup. Does the Powerplay P2 really amplify the signal for this kind of earbuds or is it more a level adjustment that lower the signal? And do you know if the Donner EM1 or EM2 can be used live plugged in a powerbank? Thanks
I did a comparison video for the Behringer and the Donner one here: czcams.com/video/qi7Uq-4w-9E/video.html but yes, the P2 definitely amplifies the signal quite a bit so that shouldn’t be a problem 👍
@@ScottUhlMusic fair enough. If the IEM unit I’m looking at (Lekato MS-1), has volume buttons, would that suffice? I’m hoping to just buy this, figure out where in the mixer it would go, and then not have to rely so much on the wedges since our guitar player likes to turn himself up throughout the night and I end up blowing out my voice. I’d prefer to not have to buy any other pieces of equipment that I then have to figure out
That would work, just keep in mind that is the cheapest system available and might not work at every show. It’s on 2.4Ghz so you should watch this to get the best results; czcams.com/video/RCrFKKr8WUA/video.html
Hi, thanks for this. Will there be an interference issue if 3 sets of these are run altogether (1set for Bass player, 1 set for lead guitarist, 1 set for rhythm guitarist)? Thanks.
If you use that many of a cheap wireless system all on the same frequency, it’s possible. Get one on 900mhz, one on 5.8ghz and one in 2.4ghz would be my advice 👍
Great video. Im looking for a budget wireless monitoring system to send click track to headphones... Im looking at the BOYA XM6 (Rode Wireless GoII alternative) wireless lavalier system to use as a wireless pack to send my headphones mix to the receiver. But seeing some of your other reviews, maybe I should stay away from 2.4ghz? Hope you can have a look, as its seems like an easy stereo option with the line-in/out option. 5ms claimed latency is also is to consider. Im also just a 1 man band type with the occasional guest musician, so moving far distances is not a priority, Not sure if distance helps the 2.4ghz stability, but im typically never further than 10ft from my setup. Thank you, Just subbed, great content! Cheers
Thanks! I just looked at it, and yeah with it being on 2.4, that’s the worst part. 2.4 does still work, I’ve just had a lot of bad luck with it. So I would suggest looking into this one: czcams.com/video/iyGSRyTWbhE/video.html It’s actually cheaper 👍 And 5ms of latency is definitely nothing to worry about if you do decide to get the BOYA instead. You won’t hear that. But the one in the video link I sent is cheaper than the BOYA and works really well. My singer uses it as his main wireless IEM system
For this DIY inear system, it sounds fine to me, but some people are more picky for their tone. However, in general for high gain guitar tones and for bass I definitely would recommend getting custom molded inears and at least 3 drivers. With the universal fit ones it kind of sounds a little tinny. You get the general idea of what your tone is, and you can hear if you are making a mistake and stuff like that, but the quality improves drastically with custom molds in my opinion. But after switching to IEM, I have a hard time doing the few songs I’ve done without them. I love them
I would say this diy set up gives you about 80% of the quality of the sennheiser unit. You definitely get more noise/static with this one. It’s definitely still useable imo, but you get what you paid for, and the sennheiser is definitely better of course. I still use this setup for my acoustic shows though
I'll check on this fornmy band but do you know if those wireless systems can run with multiple receivers so we can have the same mix for more than one band member?
You cannot do that with this system. This is an IEM hack and the wireless cannot send simultaneously to multiple receivers. However, this one is a great price and can do that: czcams.com/video/dJL_zI2drRQ/video.html
@@ScottUhlMusic Oh yeah, I've watched that video. I asked because a friend of mine wants a wireless IEM system on a budget (on a very thight budget) but I was wondering if this could run several transmitters. For the band, I'd go with the Phenyx, hands down! Thanks again, mate!!!
The iRig Pro Duo (only one available) is sadly even more expensive then the entire in-ear set-up. Any budget friendly alternatives anyone can recommend?
Yup, I did a video on it actually: COMPACT & PORTABLE Wireless In-Ear Monitor System - XVive U4 czcams.com/video/YsMtzSuDH-w/video.html The U4 is meant to be used as an IEM system, so it will be better than this hack for sure. But also a little more $, so it’s up to you 👍
Hello, thanks a lot for this video. Regarding the wireless device what do you suggest ? Mono or stereo ? Because I use the system with the jack (mono) and I don’t need to pull completely the jack inside the amplifier. If I do that I don’t have a signal in my ears. So not easy to found a wireless stereo with a 5.8 ghz. Thanks for your help
This diy system is a mono system. If you are interested in a stereo system for somewhat cheap, check out this video: czcams.com/video/dJL_zI2drRQ/video.html
@@ScottUhlMusic thanks for your answer my question was regarding the p2. Because when il put a mono jack i don't need to put fully the jack inside to have the sound, if i put it fully i have nothing in my ears. Perhaps i need to change the P2 from stereo to mono ? Thanks
Very cool idea. Can multiple people (each with their own receivers) take a feed from a single transmitter? Any issues if you and your band mates are using lots of these budget wireless systems at the same time? Or even if you are using one for guitar and one for IEM? Those two devices are going to be pretty close to each other.
1) Not with this system no, this is an IEM hack. Other actual IEM systems do allow that 2) the more wireless on stage, the more of a chance of dropouts. Especially with cheap ones. Cheap wireless have maybe 4 channels available to transmit on. Higher end ones have thousands of available channels and 20-100 can be used at once. So with this IEM hack, I would not recommend using a ton of these. Instead I would look into a cheap IEM system I reviewed here: czcams.com/video/dJL_zI2drRQ/video.html 3) using 2 at once shouldn’t be a problem, but it always depends on the wireless environment. But 2 should almost always be fine
I have a Headrush Looperboard and want to connect my Looperboard, guitar, and IEM together wirelessly just for practice without disturbing the wife. Is that possible with a single set of Transmitter and Receiver with all the bells and whistles that are provided by the Headrush or would I need 2 sets to make it work? I'm new to all this so sorry for sounding like a noob
You can use this setup for sure to run a direct out of the Looperboard to your headphone amp that your IEM's are connected to (like this video). For sure. If you want the guitar to be wireless as well, you'll need another set of wireless. Cheers!
Thank you guys for checking out the video, and hope you found it useful! If you are looking to spend a little more money, I made another video about a very simple and extremely portable IEM system that I use most of the time I travel for gigs or whenever I don't want to take my Sennheisers out of the rack. Check out the video here: czcams.com/video/0WT9fHqVzZg/video.html
Hello Scott,is the ammoon t/r system mono? Is it a problem to run mono iem system ?
@@christianpucciarelli It will be a mono system using this method
@@ScottUhlMusic I guess it works good anyway ?
@@christianpucciarelli It works great! But you have to realize this is a wireless IEM "hack"... this isn't a normal way to use IEM's. If you are truly interested in IEM's and you have to get stereo, and you are super picky about your tone, this isn't the video for you. Gotta shell out the money if you want that! This is a trick to save money.
@@ScottUhlMusicim just starting looking at iem and wireless ,that’s why I’m here ;) and I have found very good info in your videos
no one else makes this type of videos and its legit what most of us are looking for. ty.
Exactly!!!
You're that kind of guy that can make anything fit and work together seamlessly. If you were my neighbour, we'd share the bread bans I make. Top man.
Hahaha thanks man
I thought this was an actual diy iem system, not what i expected but I'm it seems to help others. I'm looking to build my own tx and rx at home.
The comment about cords around your feet hit home. Im even picky enough to clean around my spot on the worship stage I play on. Cords, Mic stands, monitors. Got to move it all every week. Don't know how it's always in the way.
Yeah, it’s such a pet peeve of mine. I just like being able to move around without being tethered, which is why I’m just always wireless
Oh my gosh thank you for this!!!! Just yesterday I was wondering if this was possible.
Glad to help 🤘
Respect, man. This is exactly what beginner live-performers like me, need. Cheers!
🤘🤘
@@ScottUhlMusic Also, can you please mention if in-ears with mics are okay? Found the CCA 12 at a very cheap rate with mics
@@shanegeorgethomas3733 Get the ones WITHOUT Mic for in ear monitors. I reviewed the CCA's here: czcams.com/video/xVUf7g2iJJ4/video.html
Thanks for the video man! I was about to build something very similar and I was a bit unsure about how would the wireless receiver and the P2 behave together so your video just confirmed me it works. Great tips and gear recommendations. Thank you for sharing!
Glad to help 🤘
Great video. Love the diy aspect. Thinking of using this in rehearsal to take the mixing desk aux out to my shure in ears rig instead of the ridiculously long cable I’m currently using!
That’s definitely a great way to use it!
Hot damn, what a great video Scott! Don't know how I'd missed it. You're putting out a lot of great content and so helpful/useful. Thank you!
This is EXACTLY what I need! My church has some P16 monitor mixers, but I've resisted because I won't have my ears tethered to the P16.
Glad to help out :)
I've tried this and it works great in my garage. Will try at a gig next week. I went with the lekato wireless that runs on UHF frequency so it wouldn't conflict with my NU-X B5RC that runs on 2.4ghz. only difference I can tell going wireless is it almost seems like there is a noise gate or something. I don't hear the first click of the click track but I do when hardwired with a cable. Weird. Small price to pay for being able to move around and not trip on any cords.
I had to change it up a bit from yours because I had the PM1 but I just purchased the Stereo female to xlr male adapter instead and was able to obtain the same results :)
Awesome! Glad it worked 🤘
U know what’s crazy I actually do this as well 😭😭😭 I never seen dis video but I had da same idea😭😭 this is awesome doe
It’s a nice little hack 🤘
Build this exact rigs for pub gigs where we run our own PA. So far so good.
Nice!
Man your brain is just awesome lmao thanks for this!
I am using a BOSS WL-50 transmitter + receiver set FROM my guitar INTO my Digitech RP360 effects processor/amp simulator. And then a BOSS WL-20L transmitter + receiver set FROM my Digitech RP360 and finally INTO my Behringer Powerplay P2. The BOSS WL-50 and WL-20L work seamlessly and without interfering with each other. You just have to remember to "pair" each set's transmitter to the proper receiver before each session.
Coming OUT of the Digitech RP360's stereo 1/8" output jack via a high quality 10' long, 1/8" to 1/8" patch cable, I then use a high quality 1/8" female to 1/4" male adapter going into a high quality 1/4" female to 1/4" female line connector, with the WL-20L transmitter 1/4" plug going INTO the opposite end of the 1/4" female to 1/4" female line connector. The WL-20L receiver is then plugged directly INTO the Behringher Powerplay 2 with, of course, a pair of high quality studio headphones coming OUT of the the Behringher Powerplay 2. (The pocket clip on the Behringer Powerplay P2 is super-convenient.)
This is how I practice at home. All together this cost significantly more than $100 but I chose to go this route because of the versatility of all of this gear if I want to set up differently, for instance, using the BOSS WL-20L and the WL-50 to go wireless with two instruments simultaneously (me and a collaborator) or even to go wireless with one instrument and, by way of a XLR to 1/4" male converter, one mic. Haven't tried that yet but I COULD without paying $300 for a BOSS wireless mic receiver/transmitter set. (Which I probably will do anyway because I'm sick. SICK, I TELL YOU! This is what Sweetwater can do to a person. Guard your Souls, friends....)
Nice! If you found something that works for you, that’s the important part. Great setup 👍
Do you have to use the headphone amp or can you just use a quarter inch adapter on the receiver and adapt the quarter inch to eighth inch headphone Jack?
As long as you have a way to turn up or down the volume of whatever the wireless receiver is plugged into (so you can control volume of your IEM mix), you can use whatever you would like 👍
Excellent! Just what I need. Thank you much.
🤘🤘
KZ ZS10's are amazing!
Once again great vids Scott, very helpful mate!! cheers
Thank you 😊
I have a QSC TouchMix 16, which enables everyone to tailor their mix. Your tip will help me a great deal to get started. Thanxabunch!
Glad to help! Also just keep in mind that the more of these cheap wireless you have next to each other, the more likely they are to get dropouts. Using 1, or 2, or 3 are usually fine, just don’t put them right next to each other. That’s part of the reason IEMs and wireless have different price points... the higher the price, usually the more units you can use at once
Does it works? I have the same mixer, , I did with the aux and cable but doesn’t have enough volume, cuz is “line level”, I’m wonder if it works with this, I’m doing it wired
Scott thanks for sharing this idea this worked perfect
Awesome! Glad to hear it 👍
Nice, that's what I did as well. Just another old amplifier (Audio Technica)
Dude... I HATE cable tangling. For the band we have sweet Sennheiser in ear system but at home... I'm tethered by cables... Tried blue tooth but even fast transmitters have a lag. Recently nabbed this wireless system on your recommendation and it's great. Maybe a shade bright but definitely workable until I'm willing to pony up for Sure. My first thought was to get another pair and reverse it for the home cans. Beat me to it haha. I would have just gone to a cable adapter but think you're spot on with the in ear amp for volume control. Great videos. I appreciate the work you've done to try these all out and share your experience. Thank ya sir!
Dude, I still use my wireless at home! I absolute hate being tangled in cables. Even when I do solo acoustic (looping) sets, I have a wireless mic, a wireless guitar, and wireless in ears just so I'm not tethered haha. It's kind of an obsession! Glad you found the videos useful
@@ScottUhlMusic Any suggestions beyond the P2? They're pretty much out everywhere. Next jump up I see is $80 or more.
Side note... I thought I'd get around the need for the monitor amp with a series of adapters. It worked but sound was like 30% of what my cable was. I asked our sound tech what he thought it might be. "Um, that little thing can't push enough power to run cans." Power... something taken for granted in cables that I didn't eve consider lol.
@@crocholiday Yeah I need to look into other options. My drummer broke his P2, and had to order a new one and it's been on backorder for over a month. It's just now arriving in like 2 weeks. I'll have to look into other options
Excelent my friend congratulations your video very good!!! Saludos desde Colombia.
this is lifehack!!!!! amazing
Good video! A little corny with the movie video clips, but overall a good video demonstration.
First of all you make amazing content🔥 and i wanted to ask that if i use 3 of these can i have seperate mixes on all the 3 and have click track and backing tracks going on and if yes how ;please explain or make a detiled video as there is no input on these transmitter so splitter will also not work?
Thanks! I wouldn’t recommend using 3 of these, but it’s definitely possible that it could work.
I would watch this video: czcams.com/video/kUNBHi5F3aQ/video.htmlsi=rrcAFKOeJUvwS6Pj
And this video for in ears: czcams.com/video/XQjFhkQTVP8/video.htmlsi=3OstdXzKgh32FI1A
and this one for backing tracks: czcams.com/video/UmbdfJpxiIE/video.htmlsi=h-LD1o2B0Ud0RY23
I have a question can u use IEMs without a mixer? If I were to use my transmitter directly to my amps headphone jack with an adapter will that work?
Yup 👍
@@ScottUhlMusic thank you
Thank you sir ....very very good advice
Thanks!
Hi Scott. Thanks so much for this. It just might save me a lot of money! 🤞
I just have a couple of questions please...
1. Is it possible to have multiple members plug in these devices and not interfere with each others signal?
2. You often have a 'cons' section to your videos. What is the con with this set up please?
Many thanks in advance. 🙏👍😁
1) you can, but I don’t recommend using a ton of cheap wireless all at once. See this video:
czcams.com/video/Xgw96rY4TAc/video.htmlsi=m7nhnk-wsvTfgaQD
2) this isn’t really how IEMs are meant to be used, and you can get pretty afffordable stuff now without this hack. But again, the more cheap wireless on stage at once, the more likely they will get interference. But I also go over that in this video: czcams.com/video/Xi2JcMomjQ0/video.htmlsi=7uVBzNBbvjbVPSxa
@@ScottUhlMusic Thanks so much Scott. I actually watched your top 5 things you get wrong with wireless systems right after this and saw that the exact question I asked was in the list! 🥴😂😬
Thanks so much for taking the time to reply and top notch channel! 👍
Amazing!
Great video! But wouldn't the guitar still have to be wired? Unless you use a second wireless transmitter and receiver for the guitar to be completely wireless? If I've missed a step please help me to see it 🙏
You would need a separate wireless for the guitar. This hack is for an IEM system
@@ScottUhlMusic Thought so! Appreciate you and all your content Scott 🙏
This is neat! Is the sound in one ear or both ears when you do this?
Both. If it’s in one, set the switch to mono 👍
And what about the sound quality? I have a ld system that cost me 250 and the sound quality is really bad, a lot of frequencies are lost
This isn’t really a “traditional” IEM system. If you are looking for high quality, look into an actual IEM system. This is a hack to get by
thnks a lot!! this is really helping..
🤘🤘
Thank for the video!
When practicing with the band I can image i'd just insert the wireless receiver in the P.A.
But when we play live the distance between stage and FOH might be a few meters.
How will this affect the signal? Of should I be able to connect the transmitter somewhere onstage?
Thanks!
Range always depends on the conditions of the venue. And with cheaper wireless gear you often do get less range. I believe these will be good for 50-100ft in good conditions. So it will depend on the show and the wireless environment at the show. Remember, this is an IEM “hack” to save money. It won’t work in every single scenario. If you need a full on IEM system, you can still get some for pretty cheap now 👍
❤❤❤
yo thank you for doing this!
🤘🤘
Can i just connect this directly to the back of a piano?? Or no?
Piano? Do you mean keyboard?
Bought the P2 on your recommendation and it works nicely, so thanks very much for that. Was looking for an affordable solution to very annoyiong cable problems. I already had a 2.4Ghz Getaria for my bass so though I would try it with that before buying another for the IEM's. Has a little bit of static noise or interference so I will be purchasing a more expensive 5Ghz set to hopefully sort that problem out. Sidenote, I ony have a couple of phones/tablets in my studio using wifi, other than that there are no wireless signals in the room at the same time.
5.8 should be better, but… just remember this stuff is cheap for a reason, and this is a DIY hack for and IEM system. It works for sure, and I’ve giggled with it… but if you want a really good one, you’ll need to spend the money. This is usually the one I recommend to start with for beginners since it’s not very expensive at all: czcams.com/video/dJL_zI2drRQ/video.html
@Scott Uhl That looks like the system I'll check out for the future. Thanks dude. I'll try the 5Ghz one first. Thanks a ton for the advice man🤘
If you plug the transmitter into a headphone's out of a device....would you really need the P2 at the receiver end?....considering your having an adaptor to plug my headphones into the receiver.
If you don’t mind going to the transmitter to turn up or down volume. The way to turn up or down won’t be mobile on you in that case. But yes, you could do that if you wanted 👍
Whats the difference between the Xvive4 receiver and trasnmitter and the behringer P2... i don't really get it... the behringer p2 doesn't have a transmitter?
Behringer P2 is wired. The Xvive is wireless.
Hi - great video. This is exactly the kind of solution I was looking for, but I have one question. My planned setup is a little different than yours or probably most others, as I do not plan to use my band's mixer as my in ear feed. Mostly because I am only using this for band practice - not gigs. For our practices, the only things that run into the PA are the vocals and keyboards. Guitars, drums and bass are all separate.
What I am using currently is a Zoom H2N recorder. I set it up a few feet away from me and it's condenser mic picks up all the instruments and I use its headphone jack output to connect to my Shure ear buds. It works great, but I would like to get rid of the headphone cable by adding the Behringer P1 and the Amoon wireless system to my setup.
So my question is - can I simply plug the Amoon 1/4 jack into a 1/4 to 3.5mm adapter coming out of the Zoom mic's headphone out? The issue I am worried about is that the headphone out is stereo, whereas the 1/4 jack is obviously mono.
Thanks again - your video was great - easy to follow and your solution is very creative and can save people a lot of money.
Glad you liked the video. To answer your question, yes it would work. I’m not sure how the stereo to mono would work, as sometimes when you do that you will get only the left or right side. You could also use the adapter out of the P1 as well if you wanted to do that. Also at that point, a cable might just be better. But either way, using a 3.5mm to 1/4 adapter should work no problem. 👍 the mono might be the only problem if you have any
@@ScottUhlMusic AH ok - so you're saying that if i use the adapter, it might only send a sound signal to either my left or right headphone? Maybe this would be counteracted by using the P2 in mono made....
I haven’t used the Zoom before this way, so I’m not 100%, but I’m pretty sure you would be ok 👍 There’s always the Amazon returns if it doesn’t work :)
Love your work Scott Should I use a different band for in ears to the guitar wireless.? For example 2.4ghz for IEM and 5.8ghz or UHF for guitar.
If you only have 2 wireless going on stage, you should be ok either way... but it definitely wouldn’t hurt to do it that way if you can 👍
Great f video. I am new to monitoring and just got the Behringer P1, and it's a bit easier since I just want to monitor my voice straight from the mixer. Thanks a bunch for the explanation man, I was trying to look for a video that was detailed enough to understand how to do it, so far this is the best video I've seen.
Can I then buy the nux b3 and be entirely wireless?
Thanks a bunch and greetings from Colombia, South America
Yup, can be entirely wireless if you use the nux b3 on your mic and then this setup for your inears 🤘
Hello,
Finally the sound is mono or stereo ?
Thanks a lot !
Damien
This will be mono
Hi just a quick question seems the wireless guitar system is mono does the output in the headphones only come out in one ear or both???
You’ll hear it in both if you set the switch to mono. Find out more in my video here: czcams.com/video/WpvkVrNQtxA/video.html
Thx , very informative
🤘🤘
Awesome content! I also have the amoon 5.8Ghz version, it's super awesome. I just have one question, I noticed that the 1/4" plug is mono, if you're gonna use it for IEM, you just hear a mono mix sound?
Not if you are plugging into a MONO IEM/headphone amp. I did a video about how to do that here: czcams.com/video/WpvkVrNQtxA/video.html
Thanks for this. Would this receiver work with the Behringer X-air x16?
Yes it would 👍 you would just need an xlr adapter
Not sure if anyone mentioned it here yet but Pro Co. offer a similar system to the Xvive in the more stable 5.8 ghz range for a similar price
I haven’t heard of that one, as a ton of companies are making these cheaper 2.4 and 5.8 ones. But a lot of them are very similar. I just really like the Ammoon one
Im trying to get this set up for band practice but also record the feed with an interface. Is there any way thats possible?
Yeah with a mixer that will work 👍
You got so much option in one video nice heheh thanks
Definitely wanted to give as many cheap options as possible 😊
Hi, thanks for presenting this solution. I'm searching a wireless setup for silently practicing with my electric violin at home, running it through my amp. As non-DIY Setup I thought of a Line6 G10 for violin>amp & Xvive U4 for amp>in-ear, which would end up at ~400$. Line6 G10 only because it's highly recommended in violin forums, since I heard that not all transmitters work that great with piezo pickups, since they got a high impedance.
If I instead try this budget solution, could I use 2x ammoon transmitter for violin>amp & amp>in-ear or are there interferences to be expected? Would you recommend these transmitters for piezo pickups?
I do not believe the G10 works with piezo pickups, but I could be wrong. You could go with 2 Ammoon ones. Use the black one for the violin and the red-ish one for the IEM system 👍
Thank you this is really cool! Any option to make this stereo? I wouldn’t mind putting extra bucks init but I wanted something compact
I don’t know anything that would do that that is in stereo and this compact. But if I find one I’ll definitely do a video on it 👍
Hi! I want to do this, and I already have 1 Ammoon system, do you think I will have interference problems if I perform with 2 pairs (one for my guitar and one for my inears)?
All wireless depends on the environment, but I think 2 wireless shouldn’t be a problem. Maybe get the red/wood one and the black one as a second one just to be safe 👍
Hello! I currently use this technique (Behringer P2 and Ammoon A8 with XR18 console) and I currently have issue, audio starts cracking at higher volume. But if I set volume too low on console output, the transmitter's noise is too noticeable. Is there any way to solve this?
There are many possibilities. This is a diy hack and it’s not a REAL IEM system. Since making this video I have found this which might help: czcams.com/video/UorLl_vxYA4/video.html
what'd happen if you just use an adapter to connect the IEM's straight to the receiver? You wouldn't have a personal volume adjustment but would it work?
Yup you can. I do recommend having volume control though. It’s asking for a problem if you do not have volume control
@@ScottUhlMusic thank you! Much appreciated
Hi! May I know how to work the Xvive u3 transmitter to the mixer as it uses XLR instead?
Yeah the wireless xlr would work well for this. Although the Xvive also has the U4 which is actually an IEM system: czcams.com/video/YsMtzSuDH-w/video.html
Hi Scott, great videos and very useful info here on your channel.. Can you recommend an updated option instead of ammoon - 5.8ghz to use it in yhe same combination as a cheap IEM sistem with the Behringer P2? What about the SWIFF AUDIO WS-50 or Lekato ws-70? Thanks in advance.
Yes, either the Swiff Audio or the Lekato ones will work great too. I have a lot of them listed in the description... all of them will work great with this setup. Cheers!
Hello Thanks for this video. Where to I plug the other end of the xlr cable in my Mixing Desk please?? Is it the Monitor Output? Thanks
Wherever you are getting sent a signal from. Usually a mixer 👍
I went to try this setup and the P2 of course is backordered so I thought I'd try the EM1. I am wondering if because you can't change mono stereo on the EM1 I am not getting a signal at all. I saw your other video for that Nux B7PSM and might just go that route, but still wanna know what I did wrong here haha! Your videos have been very eye opening and helpful!
You should get signal still even without the mono/stereo switch on the EM1, so something else is likely wrong. And you can get a TRS male to TS female adapter for very cheap
hi there! I tried a similiar thing with the black amoon 5.8 MHz through a *passive* beltpack. Way not loud enough.
Does the active one do a great job??
Yes, a passive one is going to be much much more quiet than an active one like the P2
What size rack do I need for everything? I’m going to start piecing this together.
This on on my list and might be missing something. Behringher 2u. Power 1u. Splitter 2u. In ear wireless 1u. My guitar wireless 1u. My helix 2u. Power amp 1-2u. Leave a space for router?
My advice is to always leave at least 1U of room. Sometimes 2u just in case you want to upgrade 👍
@@ScottUhlMusic thanks. Am I missing anything though?
I’m not sure of your exact setup, but it looks like you have everything 👍
Hi Scott - thanks for this very informative video
I have a Line 6 pod go. Can i use a wireless guitar system to play wireless and use another wireless one as a IEM like you showed in your video ? Or do I need only one ? How do I connet those pieces ? - Thanks a lot!
Yup you can do that for sure. One wireless from guitar to pod input, and one wireless from pod output to P2 or any other headphone amp for a DIY setup like this 👍
Hi Scott
Love your channel. Thanks for taking the time. I'm setting up a new home studio. Like you I detest cables so I'd like to go wireless monitoring/recording. I have a decent budget up £1000 ($1500)
Input 1
Guitar to amp (wireless)
Input 2
Guitar Amp to mixer/interface (wireless)
Input 3
Bass to amp/pedal board (wireless)
Input 4
Bass amp to mixer/interface (wireless)
Input 5
Mic to interface/mixer (wired)
Output
Mixer/interface to wireless IEM (wireless)
So I make that 5 lots of paired units with as close to zero latency as possible. Do you think the setup you mention in this video with the Behringer pack would work or could you recommend another? The idea is to have everything connected permanently to make workflow as straightforward as possible...just pick up, play and monitor with zero sound being emitted beyond the in ears.
Thanks again
I think that should be fine. If you start compounding wireless that’s where you can start getting latency, especially with cheaper ones. I’m assuming bass and guitar amps are separate. Buffer size might be an issue, but I think it would work 👍
Thanks for the great video. Links to Ammoon 5.8G etc no longer work. Which units should I look at?
Thanks! I would check out the lekato one that is in the description. Or also this one: czcams.com/video/DSqdd--06hQ/video.html
Hi, interesting idea! I have a Zoom L-12 digital mixer which has 5 monitor outputs with built in headphone amplifiers, so up to to 5 musicians can have individual in ear monitor mixes. Would it be possible to use a plug and play wireless guitar system to have wireless in ear monitors with my mixer? I could plug the transmitter into the mixer, but how would I plug my in ears into the receiver, since they're both male jack connections?
This basically can replace anything that can be replaced with a cable. So yeah, it should work if I understand correctly 👍
please make a video but for the full band
You wouldn't want to do this with a full band, that's too much cheap wireless
Hi the amnoon transmitter can not be use as a voice in ear? thanks ( for singers)
For vocals? No, get a wireless xlr instead like this one: czcams.com/video/ys2mKt0j7KI/video.htmlsi=p_UyTis96gqm98do
@@ScottUhlMusic thank you, i mean for in ear. like IN EAR MONITOR. but cheap like AMMOON :)
hi Scott . Do u know an easy way to convert stereo to mono audio? in case to take the output from headphones..to use this method... and 2nd what happend if u connect xvive u4 to a stereo output? the xvive convert/sum stereo to mono signal? these are my 2 choices for iem. I like nux iem but too many bad reviews on that. by the way very informative channel..
You basically have to set it to mono from the mixer (or wherever you are getting the signal from). You need to make sure something converts it to mono, like that switch in the P2 i mention here. Glad you’ve enjoyed the channel! 🤘
The mono/stereo switch let you listen in one /both sides of the headphones? Most mixers aux are only one side of the headphones
Yup, check out this video to understand more: czcams.com/video/WpvkVrNQtxA/video.html
3:38 - The main reason for me to spend more is to have a limiter. I really don't want blown eardrums.
Agreed!
Are you not using a limiter or do you know of options for only a limiter in a setup like this? I have a submixer on stage and from there i can go in my iem but im scared without limiter...
You won’t have a limiter with this, which is why I say to be cautious doing something like this since it’s an IEM hack
This is almost the same price as this: czcams.com/video/iyGSRyTWbhE/video.html
Great video. Would this set up be suitable for singers to hear themselves? Thank you!
Yup, definitely 👍
Thank you very much! I have a question. Would you recommend using the headphone out into the wireless transmitter or using the DI out of my amp? Considering I just need to hear myself. Thank you very much!
You’ll need a headphone amp no matter what to adjust the volume. Whatever it’s coming out of. Just always watch your ears, since this is a DIY hack and not a normal IEM setup 👍 Always test it on low low volume first
@@ScottUhlMusic thank you! Will do! I'll try it out for tonight's gig
Behringer Headphone Amps was not isolated well so I experienced noise due to the wireless signal. I recommend DONNER with inbuilt chargeable battery
Dinner is good, but this is the one I recommend the most now: The Best WIRED IN-EAR MONITOR SYSTEM - Fzone P4
czcams.com/video/8it_NjTiUT0/video.html
Hi, thank for this video, it's exactly what i'm trying to do! I already have KZ in ear earbuds, guitar wireless CUCAVE 5.8 (ammoon rebranded). I want to use the "line out" output of my guitare amp (that do not mute the amp speaker) to send signal to this in-ear setup. Does the Powerplay P2 really amplify the signal for this kind of earbuds or is it more a level adjustment that lower the signal? And do you know if the Donner EM1 or EM2 can be used live plugged in a powerbank? Thanks
I did a comparison video for the Behringer and the Donner one here: czcams.com/video/qi7Uq-4w-9E/video.html but yes, the P2 definitely amplifies the signal quite a bit so that shouldn’t be a problem 👍
@@ScottUhlMusic Thanks. Unfortunately the Donner EM1 or EM2 is out of stock inFrance. I've ordered a powerplay P2!
Can you just use a transmitter and receiver and headphones and plug it into an analog mixer or do you have to have the amplifier as well?
You should always have a way to turn up or down the volume. If that’s on your mixer, that will work technically
@@ScottUhlMusic fair enough. If the IEM unit I’m looking at (Lekato MS-1), has volume buttons, would that suffice? I’m hoping to just buy this, figure out where in the mixer it would go, and then not have to rely so much on the wedges since our guitar player likes to turn himself up throughout the night and I end up blowing out my voice. I’d prefer to not have to buy any other pieces of equipment that I then have to figure out
That would work, just keep in mind that is the cheapest system available and might not work at every show. It’s on 2.4Ghz so you should watch this to get the best results; czcams.com/video/RCrFKKr8WUA/video.html
Hi, thanks for this. Will there be an interference issue if 3 sets of these are run altogether (1set for Bass player, 1 set for lead guitarist, 1 set for rhythm guitarist)? Thanks.
If you use that many of a cheap wireless system all on the same frequency, it’s possible. Get one on 900mhz, one on 5.8ghz and one in 2.4ghz would be my advice 👍
@@ScottUhlMusic thanks heaps.
Great video. Im looking for a budget wireless monitoring system to send click track to headphones...
Im looking at the BOYA XM6 (Rode Wireless GoII alternative) wireless lavalier system to use as a wireless pack to send my headphones mix to the receiver. But seeing some of your other reviews, maybe I should stay away from 2.4ghz? Hope you can have a look, as its seems like an easy stereo option with the line-in/out option. 5ms claimed latency is also is to consider. Im also just a 1 man band type with the occasional guest musician, so moving far distances is not a priority, Not sure if distance helps the 2.4ghz stability, but im typically never further than 10ft from my setup.
Thank you, Just subbed, great content!
Cheers
Thanks! I just looked at it, and yeah with it being on 2.4, that’s the worst part. 2.4 does still work, I’ve just had a lot of bad luck with it. So I would suggest looking into this one: czcams.com/video/iyGSRyTWbhE/video.html It’s actually cheaper 👍 And 5ms of latency is definitely nothing to worry about if you do decide to get the BOYA instead. You won’t hear that. But the one in the video link I sent is cheaper than the BOYA and works really well. My singer uses it as his main wireless IEM system
@@ScottUhlMusic thanks so much for the reply! your videos have been very helpful!
i will consider the Phenyx Pro model. thank you. (: (:
Thank you so much for your videos!
✌🏼🤘
How would you rate the In Ear sound in general and also with some high gain guitar tones?
For this DIY inear system, it sounds fine to me, but some people are more picky for their tone. However, in general for high gain guitar tones and for bass I definitely would recommend getting custom molded inears and at least 3 drivers. With the universal fit ones it kind of sounds a little tinny. You get the general idea of what your tone is, and you can hear if you are making a mistake and stuff like that, but the quality improves drastically with custom molds in my opinion. But after switching to IEM, I have a hard time doing the few songs I’ve done without them. I love them
@@ScottUhlMusic Thanks!
How much sound-difference is there when you compare it to your Sennheiser wireless ... ?
I would say this diy set up gives you about 80% of the quality of the sennheiser unit. You definitely get more noise/static with this one. It’s definitely still useable imo, but you get what you paid for, and the sennheiser is definitely better of course. I still use this setup for my acoustic shows though
11:55 it seems that P2 has a limiter so maybe there's no need to worry about damaging my ears?
That thing gets really loud. This is a DIY IEM so I would be cautious with this setup like I mention
I'm using maono sound card can I do this in to sound card so I can have wireless monitor ?
I’m not familiar with that.... but anything that takes a 1/4” cable can become wireless using the method in this video 👍
I'll check on this fornmy band but do you know if those wireless systems can run with multiple receivers so we can have the same mix for more than one band member?
You cannot do that with this system. This is an IEM hack and the wireless cannot send simultaneously to multiple receivers. However, this one is a great price and can do that: czcams.com/video/dJL_zI2drRQ/video.html
@@ScottUhlMusic Oh yeah, I've watched that video. I asked because a friend of mine wants a wireless IEM system on a budget (on a very thight budget) but I was wondering if this could run several transmitters. For the band, I'd go with the Phenyx, hands down! Thanks again, mate!!!
Honestly, I’ve been using the p2 for two years but running an XLR straight to the belt pack. It’s barely noticeable after a while
It’s a great little unit for sure!
The iRig Pro Duo (only one available) is sadly even more expensive then the entire in-ear set-up. Any budget friendly alternatives anyone can recommend?
I have a whole buying guide here that I think will help: czcams.com/video/Xi2JcMomjQ0/video.htmlsi=QWK8xZh5j7SOv-_K
@@ScottUhlMusic Thanks!
Nice DIY hack.. How about the Xvive Audio U4 wireless system. Have you try it? What are your thoughts about it mate compare to this.
Yup, I did a video on it actually: COMPACT & PORTABLE Wireless In-Ear Monitor System - XVive U4
czcams.com/video/YsMtzSuDH-w/video.html
The U4 is meant to be used as an IEM system, so it will be better than this hack for sure. But also a little more $, so it’s up to you 👍
Can you recommend a lower-cost similar wireless system for a singer with effects using an earset microphone?
Are you asking for a wireless vocal system? Like xlr? If so, I did a video on this one: czcams.com/video/gCgIhlSP6Oc/video.html
Great content and hacks. New sub.
Thank you 🙏
Hello, thanks a lot for this video.
Regarding the wireless device what do you suggest ? Mono or stereo ? Because I use the system with the jack (mono) and I don’t need to pull completely the jack inside the amplifier.
If I do that I don’t have a signal in my ears.
So not easy to found a wireless stereo with a 5.8 ghz.
Thanks for your help
This diy system is a mono system. If you are interested in a stereo system for somewhat cheap, check out this video: czcams.com/video/dJL_zI2drRQ/video.html
@@ScottUhlMusic thanks for your answer my question was regarding the p2. Because when il put a mono jack i don't need to put fully the jack inside to have the sound, if i put it fully i have nothing in my ears. Perhaps i need to change the P2 from stereo to mono ?
Thanks
Oh I see your question now… that’s pretty strange. Yeah try switching it from mono to stereo and see if that works
Good day! May I know if you can use a passive headphone controller like Fischer Amps Mini Bodypack 2 in replace of the Powerplay 2?
I haven’t used that one specifically, but pretty much any headphone amp will work 👍
@@ScottUhlMusic Greatly appreciated... Thanks!
I go with the Sennheiser for Shure 😂
🤣
genuis !!!
🤘🤘
Great video, thank you. Any updates to your recommendations now that it’s been a few years since you recorded this???
Yeah they make portable ones very similar to this design for like $100 anyways haha. Like this one: czcams.com/video/UorLl_vxYA4/video.html
Awesome. Missed that one so thanks. Having watched that one, I’m going with this system to get the 5ghz. Awesome vids bro. Thanks.
Very cool idea. Can multiple people (each with their own receivers) take a feed from a single transmitter? Any issues if you and your band mates are using lots of these budget wireless systems at the same time? Or even if you are using one for guitar and one for IEM? Those two devices are going to be pretty close to each other.
1) Not with this system no, this is an IEM hack. Other actual IEM systems do allow that
2) the more wireless on stage, the more of a chance of dropouts. Especially with cheap ones. Cheap wireless have maybe 4 channels available to transmit on. Higher end ones have thousands of available channels and 20-100 can be used at once. So with this IEM hack, I would not recommend using a ton of these. Instead I would look into a cheap IEM system I reviewed here: czcams.com/video/dJL_zI2drRQ/video.html
3) using 2 at once shouldn’t be a problem, but it always depends on the wireless environment. But 2 should almost always be fine
@@ScottUhlMusic Thanks!
Wouldn't it play only one one side pf the headphones ?
Nope, set it to mono and it won’t 👍
I have a Headrush Looperboard and want to connect my Looperboard, guitar, and IEM together wirelessly just for practice without disturbing the wife. Is that possible with a single set of Transmitter and Receiver with all the bells and whistles that are provided by the Headrush or would I need 2 sets to make it work? I'm new to all this so sorry for sounding like a noob
You can use this setup for sure to run a direct out of the Looperboard to your headphone amp that your IEM's are connected to (like this video). For sure. If you want the guitar to be wireless as well, you'll need another set of wireless. Cheers!
@@ScottUhlMusic sweet! Thanks for the quick response dude! You are awesome!