Sitting Since 1992 - Will it Run? 1971 Ford F600 Revival
Vložit
- čas přidán 23. 08. 2024
- I went ahead and drug home another old Ford, this time it's a cherry F600 just dying to be revived and put back into service.
SUBSCRIBE FOR MORE:
/ backyardalaskan
FOLLOW ME ON INSTAGRAM:
/ oldtrucks4life
Want to see more videos like this one? Be sure to click the like button and subscribe! Thanks for watching
BackyardAlaskan claims no copyright for any songs used. All rights belong to the original songwriters, performers, and record label (if applicable).
Thanks for watching!
Keep things rusty, except your tools!
ATF and acetone makes the best ring loosener.
AKA Kroil! 🤫
Shhhh
Kroil pb blaster atf acetone and paint thinner
I have a 67 f 750 that I drive all the time. I love it
You don't even need to worry about the knock, fill it up with that Lucas goop and send it 😂
Exactly 😂
It even came with a complimentary coffee mug!
Thanks for the jb weld tutorial! I put that $#!+ on everything! SEND IT!!
Glub glub.... 4 mpg 😁 Sweet pickemup truck project
It has a floor, it has a floor hoorah hoorah. Doors shut nice. Nice find. Good vid, hope you find your FE.
With the rest of the truck being so good, it's worthwhile to address the motor issue. Can't wait for the next installment on the F600!
Great show. Very much like my '77 with 370cuin 4x4. Can't wait for the next vid.
I want one of those so dam badly
The best cliff hanger ever!
It's your nicest truck
That's keeper man ,nice seat ,dump bed ,& a kw mud flap Heck yeah 👍 👍 👍 👍
You might be surprised how long it will run around in the yard 🤣😂👍👍🇺🇸
Gotta love the bush ingenuity. Gitten it done. I was once about 50 yrs ago, one couldn't put a under the waterline patch on my 28' fiberglass boat after it broke loose from its mooring at 15 degrees, wind blowing about 50, hit the beach got a hole punched in her and the tide was starting to come in. Dang patch was on there over 2 years.
That c channel front bumper look's like it would take quite a beating. 👍👍
ive got a 70.s F600 here in Delta Junction that i am about to start on. I am getting it all cleaned up and running good and then building a "tiny house" type cabin on the back of it. Glad I came across this video.
That thing is straight as heck. Sweet 6-hundy. 🤟😎
My F600 had the 361 FT also, it ran like a sewing machine, such a nice truck
She’s Cherry for something that old! No rot!
390 low oil pressure at idle...unhooked the switch
Oh you're just torturing a guy down here in Kentucky you just don't find trucks like that and if you do they are just a piles of rust and they still want a arm and a leg for them I think it's wonderful that you saved them enjoy your videos would be nice to meet you one day keep up the great work
I've owned several old iron
67 mustang 289.65 Ford camper special.. 352..69 nova. My dad had dodges.. had friends that had a belvedere with the 409. Best engine I've been around was the 454 in a c 20. Always started. In temps really low. Could pull anything. Didn't leak oil. Had a cooling system that could tow in 100 degree weather and never overheat. The c20s had power disc brakes in the early 70s. Front large sway bar, overload springs in the back. Nothing really comes close
Looking good 👍
Another great old truck find to add to your yard fleet! I'm thinking up there ihere in Alaska that the trucks of old up there are rare HEAVY DUTY breed indeed that we lower 48 state folks would love to put our enthusiats hands on. Great content!
That is an awesome find. Glad to see another vehicle saved. Can't wait for the next video. Thanks for sharing. Always enjoy your videos.
what a gem! cannot wait to see how this one turns out! thanks for sharing!
I like your approach buddy! Great vid!
Very nice old truck... so clean and straight after all these years.
I love your channel, as I've said before, it's totally unique. This one put a real smile on my raggedy old face! Thanks for sharing and best regards from Ireland.
Hey Brother! It's OK - We know you are the 'Can Do Man'! If the JB holds, then good - if not, then it'll be better yet! What an awesome vid that would be to see the engine swap by the 'Can Do Man'! Thanks Bro!
The jb weld seems like a perfectly normal repair. It just needs some ford blue engine paint over it.
I've got one of these monsters, the slightly heavier F700. Also 1971, absolutely amazing trucks
Congrats BYA on another truck/71 ford f600. Hard knock, maybe it will last a couple of miles..
great content as usual. I love how you keep these relics of the past alive.
I had a F600 and the seat looked just like that my buddy has it now and it sill Is mint that must have been the toughest vinyl ever
Also mine had say since 94. Got beat to piss before I got it lol. No brakes, runs like a gem
Great job on squeezing the last bit out of that FT motor. Good entertainment
Thx for taking us along.
So hilarious to see you just fix the hole with JB weld 🤣 ok you got me hooked up i wanna see what's going to happen next.
Clank Clank Clank❤🏁
Nice F600! It's pretty rare to find one in that good of shape down here in the lower 48, let alone Alaska! Would definitely make for a nice hauler truck once she has a good engine again. That dump bed is another nice touch, too! I know of people who'd salvage the bed and put it on a newer truck, so the bed alone is worth keeping at worst case scenario.
Really loving the JB Weld patch job! That engine's scrap weight anyways, so why not have some fun with it first? lol
Ha! Nice truck and good video! Like the repair, sure won't hurt anything!,
Well done!! That’s how it’s done me!!
Aqui no Brasil tivemos os F600.
Mas esta série teve poucos anos com o V8
É não tinham direção hidráulica, e rodas raiadas só em aplicações militares.
Muito especial este teu caminhão.
Só trabalhei com caminhões Diesel.
Como gostaria de guiar um F600 V8!
Obrigado por compartilhar algo tão especial!
A great find. I have alway liked the F600 dent sides. Onward!
Another great find. Lots of room under the hood for putting another engine in the old girl! Looking forward to the next adventure! Thanks!
that looks like a nice candidate for a ramp truck to haul your treasures when you find jewels like this.
Nice truck! She’s got the right stuff!
Another really useful and cool old rig for the fleet. Thanks for the video and good luck with her!
JB weld does wonders i really know you will get this running Thanks for sharing
Fireman 🔥🔥🔥
Might not of hurt to pull the pan for a look before patching. But hey, who wants to lay in the snow that long? :-)
JB weld sculpting. Next exhibit at the smithsonian
I briefly owned a 1971 F600 2001 into 2002. It needed lots of work and it had the split rims. It had a stake side flatbed, 300-6, 4 speed manual transmission and a single speed rear axle. It had an oil bath air cleaner. I absolutely loved driving it but few places would insure it and parts were hard to find. I sold it back to the father of the young man I bought it from.
What a cool old truck. Looks sharp.
Nice camera work! The commentary is perfectly backyard and I have never heard the word "sculpt" on another repair video before! Thanks!
Fix whatever is loose inside the engine, weld a patch over the hole and call it a day! It's what my father did to a rather large crack in an Allis WC, thing is still holding together.
Great video. I just bought a 1968 F600 with the 330. Will definitely be sticking around for this.
A chance is sometimes the only way to go. If it holds, it’ll make you a good product sponsor. Lol 😂
Wow this is just the best I love your enthusiasm for sketch but necessary repairs!Plus you can have confidence that's definitely going to hold because it's Ford tough🤠
That appears to be in great shape body wise. I'd love to have it on my farm👍
Know weld was literally the first thing I thought of when I saw that hole nice work👍
Those were great old Fords.
Great video. First thing that goes in these engines is the small seal around the distributor. It was before o rings. Excell used to make a electronic distributor for these engines, with the o.. ring. They run alot better with better spark delivery. Take care. Tim
lots of cool options on a rig like that id maker a recovery rig make a fold up ramp outta square tube and expanded metal that hinges off the back and a winch at the top of the bed and you got a mint tow truck
Great condition for that age , you got a great deal, should clean up nicely .
A great truck to haul your future parts finds from the scrap yard.
Once you get that engine sorted
sweet love it
Awesome video, thank you! Hi, from Anchorage. I’m keeping a 390 FE spare, in the garage in case I find a decent project like you often score !
JB Weld is awesome. You can fix alot of things with JB Weld, zip ties, electric tape, duct tape.
Your quite the Sculptor, LOL
That’s stinks , still a good truck , that stuff works great love the arts and crafts too
JB used to make a kinda dough you could mix up, cause me and a family member used it on a front diff on a blazer years back!!!!
I got 3 old ford trucks. My main truck has a 390 my wrecker has a 352. I just bought a 74 with a 360. I’m thinking about buying a 75 f250. It has a 400 in it is what he told me. I haven’t confirmed that yet. I’m not sure I don’t think they came stock with a 400. I gotta research that. He wants 1000 bucks for it, I know he was driving every day about a year ago. The rear end went out and he parked it. He said he has rearend for it in the back. I’m probably buying it next week.
This is a great candidate for those 68% restoration work truck projects 👏 👍 around my parts out east here that's the perfect wood truck put some sides on it and she could hold a good two or five cords ...
BA, pretty sketchy but why not? Cool video...ah, no pun intended!
Drove one just like this hauling tobacco no power steering if the oil light flashes the end is near
It's a beauty! Almost hope you don't wash the lichens off. Is that some kind of heating coil wrapped around the power steering reservoir? Looking forward to the next vid on this one.
Just be prepared the Dutch lady Noraly is headed your way on a Honda motorcycle by the name of Itchy boots
A low mileage truck from a guy who takes care of his stuff has a motor that's blown a hole on the block. I guess that answers the question about how reliable the industrial version of these motors are, and maybe why no one talks about them or uses them as retrofits. Dunno.
The jb weld reminded me of something I would do
Nice.
Now what could possibly go wrong?? LOL, shit fire, shes a runner with a sound of its own for sure but at least it will drive into the shop to pull and put... had to be a rod that sent a hole but if most of that is in the pan, who knows, might even get a few weeks/months or just moments before all hell breaks loose. Have fun with it.. its reassuring that some of these trucks still in fair shape exist. I think shes a great truck even with that dead engine
Motor is still good. Check timing chain, water pump. Chicken wire is better than cardboard. Cut a small section, bend it into the hole . It's like small rebar. Card board will break down in the inside and plug the oil pump.
I don't do much wrenching myself. I wonder though if it'd be possible to weld that. Aside from using jbweld lol. I'd assume the other issue would be making it flat so the pan would seal. Maybe file it down as flat as you can make it and use rtv to fill any gap there might be.
This is gonna be gooood 😁👍
Me gusta este tipo de camiones el mecanismo es fácil hacer mantenimiento y la estructura es bien solida
The k whopper mud flap is mint 👌!
I have a ford 8n that once threw a rod and put a huge hole in the block and oil pan and they very badly welded the broken pieces then JB welded it and ran it!
Hell yea! If the jb doesn't hold I've seen the quiksteel clay like stuff patch up things that even a "proper fix" wouldn't touch.
Quicksteel is awesome..
Ouch, it hurts to see that kind of block damage. I guess you can't hurt it to much now. If you can find another heavy duty engine this one will provide a lot of spare parts if it doesn't blow up too hard. I have run a lot of those old Fords of that era (most of them 330 powered) and this truck will be well worth finding another motor. They are far better than the trucks that replaced them in my opinion. Nice.
Good posting! Appreciate all the humorous aspects. I have some automotive ignition tools I would be happy to send to you. Just provide an address. Keep rescuing old vehicles!!
Hell ya 👍👍
Nice looking find. JB weld it and let it rip. If she, she runs. If she blows, go find another motor..
That truck is in way too nice shape for it's age. I think before you try starting it again, I'd drop the oil pan. You might be able to get away with replacing one rod & bearing and save the engine. That would be a whole lot cheaper than another used engine. Just a thought. 🤔
Great video as usual bud I really like your channel
I've heard of people using mineral spirits,atf, and mysterious mystery oil lol.
Open it up and pull out that broken rod. Run it on 7? If it don't run on 7 it never woulda run on 8... Nice video as always.
I've read that the 360FT had a forged crank, not sure about the 352FT
Every industrial FE block I've had anything to do with seemed to be dogs compared to my 390 in my 69' 3/4 ton.
check the points first!!! Hey Mustie1 this kid out did you
Nice Truck Replace the engine and this will still work for years