INS AND OUTS OF THE GRACO CLEANSHOT VALVE
Vložit
- čas přidán 13. 09. 2024
- I show you the ins and outs of the Graco CleanShot Shut-off Value, and my tips and tricks to save time, save money and have the best finish possible 💯 percent!
If you like this walkthrough, please give me a big thumbs up and hit that subscribe button. Many helpful vids soon to come out for the paint community and DIYers on my channel, all things painting and decorating.
→Follow my Instagram: @paintingbyjosh
→Website: / paintingbyjosh
Check out my website and merch store:
► paintingbyjosh...
►paintingbyjosh...
🛠GEAR used in this video 🛠
►Graco CleanShot™ Shut-Off Valve
goind.com.au/p...
►GRACO 40cm Extended Reach Tool Range
goind.com.au/p...
► iQuip Envo Tape - 36mm x 50M Range:
www.paintingby...
►iQuip Masking Film
goind.com.au/p...
thx mate
A must have for anyone who's spraying 👌
Definitely bro! Love my Cleanshot 💯
Solid no time wasted tip.
Appreciate it 💯🙏
brilliant vid josh
Hi, do I need a Clean Shot device if I am going to use an extension for Graco Quick Shot gun? Thanks
Just bought one. Thanks for the instructions. 👍🏼
Legend you gonna love this cleanshot💯 Today we spray
So well said man! Thanks for the awesome video and getting the right info out there 🙌🏼
No worries Bro! Happy to share what knowledge I have! The Cleanshot has been a grey area for a lot of painters. 🤙🤙
Good video man thanks
Cheers mate🙏🤙
What difference is there between the 495 and 595?
Thanks Josh!
Great work Josh great video
Good stuff Josh. I just bought that attachment, now I know what to expect. Thanks
Good to hear mate, you are going to love it
great explanation
Hi Josh, thanks for taking the time to make this, it really helps clear up the confusion I had with this device. I’m new to spraying and some of the equipment is intimidating. Could you share your wisdom and tips do a vid on priming and cleaning your airless? You have everything so clean!
Awesome glad you found this useful Garcia. I will do a video in the next few weeks on priming and cleaning out the machine🙏🤙 cheers
I don't have a cleanshot yet but it's on the list. now when I use the extension I am forced to finish the jet in the air. thanks for the explanation!
Definitely a good investment that's for sure. Been there with the extension and no cleanshot. Finger on the trigger and don't let go 😂🤙
So you can use an fflp on the clean shot ? Hell yeah I’m about to buy 1 🤙🏼
Sure can! That's what we recommend 🔥
Hi Josh, great videos! At 2:24 you talk about the throat liquid that you pour into your machine. I am a diy guy and have a graco project sprayer. Do I need this stuff? Any tips would be appreciated.
Hi mate thank you for the positive vibes. Depending on you graco machine but a lot of the project and diy machines do not require throat seal liquid I'm sure this would be the same for your machine👍 hope this helps mate
Thanks Josh! After further investigation the pump is a sealed unit on my little sprayer.
@@adamsapple65 awesome mate I thought so 👍
Thank you. I bought an X7 and the clean shot based on people saying extensions cause spatter. I'm doing the trim in my house and all 30 doors right now. I had no idea how to use the sureshot. One question. How do you determine your pump pressure before you dial in the sureshot. I don't know if I'm setting it at 800 or 3200 psi. My pump does not have a gauge. Thank you.
Hi josh are you saying you gradually turn the valve to get it to work and stop when it stops spitting or turn it fully to close it
Thanks for taking the time to share your knowledge 👍
Yeah brother exactly right just until it stops spitting in a lot of cases its fully turned 🙏🤙 respect
we use this in the UK a lot , down at 800psi with tri teck and graco lpff tips , its the dog bollox , as well as inside cabinets and trim , its a grate angle finder , just need to get the pressure balanced out
Sounds like a awesome setup mate. Definitely helps with them hard to reach places💯 🙏
Every time you finish using the Clean shot, strip it. Even after flushing it will still have paint in it. Dont over tighten the 2 x 5/8 nuts. Just nipped is enough. I put a tiny smear of Vaseline on the O/ring before assembling
So If You Have The Clean shot valve dialed into the "Flush" position. Can it be used strictly as a directional for spraying ceilings where one may not need necessarily the spit free. Thus saving wear and tear on the clean shot valve??
Hi John. No if the Cleanshot is left in flush position while you spray it will not come out a fan pattern with alot of splatter from my experience 👍🙏
Hi Josh great video. What pressure do you run on with fflp tips? Cheers JB
Depends on what product, what machine, the temperature. Rule of thumb is when it stops lining i start painting 🙏
Hey bro, where can I purchase one of ur jumpers like the one you're wearing?
hi josh how much is your cleanshot?
What if I’m only using a 10 inch extension, still need this? Thx
any extension will leave paint in it without pressure. So when you start spraying again it will splatter with the paint left in the extension.
@@chris560 So extensions basically suck then! 😁👍🏻
@@tundrawhisperer4821 if you know where to start and stop no. They are very valuable. The sure shot can help with spurts.
Great video mate, should mention about cleaning of the clean shot?
Winding all the way out to flush
Will do one up brother appreciate the comment💯🤙
I don’t understand why these are required, I just spray with my gun and the finish is fine,?
They are not required but definitely eliminates spits when running extension. And with the swivel you can Spray horizontally without using a ladder👍🤙🙏
Sorry but I seem to have missed the OUTs of this valve...
4:54 through 4:56 🤔
Don't get it mate. What's the problem?
The drip
@@brianyates5224 cool👍
Hope he has his drop cloth out there. 🤣