Datsun 240Z Restoration - The Bodywork Odyssey (Part 2)
Vložit
- čas přidán 14. 12. 2023
- In this video I start doing all the bodywork on the car to get it ready for blasting. This is the first half of it. The second half is coming next week in episode 3.
First I vacuumed the whole car and removed the sound deadening.
Next I needed to remove the undercoating on the rotisserie. I used an infrared lamp and a scraper to remove it. I also did the same on the fenders. Now the car is ready to get all dents removed by my friend from parkbeulen.ch. All panels were quickly reassembled to the chassis and the car back on jack stands. He was able to remove all dents from the complete car in just one day.
Now it's time to start doing all the bodywork. I started with closing the holes from the side markers. They're not mandatory in Switzerland and I prefer the clean look. Then I drilled four new holes in both fenders to install some fender mirrors. I really like that japanese style of them, you can't see much, but it's just about the look. That means I don't need the door mirror anymore, so I closed both holes.
Working on the door I saw two holes from the inside. I quickly discovered body filler and a big dent around these two holes. I sanded it all off, welded the holes, ground it flush and hammered it until the dent was completely removed. I also found the same on the passenger door. I think they drilled these holes so the filler holds better.
I also fitted a new BRE style front spoiler to it.
In the rear I found two areas where a tiny bit of rust was shining through. I decided to drill all spot welds off and remove the panel. What a good decision that was, a bunch of rust came to light underneath. I removed everything, applied some weld through primer and welded the panel back on the car. One of the clips that hold the rear panel was broken off. I bough new ones, but couldn't replace it. I needed to drill the little bracket off, make four new ones and weld them back on the car. I had to be careful when welding, so the clip doesn't get too hot and ruin the heat treatment of the spring steel. After the rear panel section was done, I moved on with the tailgate. As I'm replacing the old flimsy and broken rear spoiler I needed to close all the holes from it in the tailgate. So I started sanding the paint off for welding. I then quickly discovered more body filler and a bunch of more holes from the old emblems. I welded them all, ground flush and drilled new holes for the new spoiler. To remove the wobbly effect on the tailgate I removed the original support piece and welded in a much stronger version.
As I won't install the roll bar anymore, I closed all 16 holes from it.
Now it's time to move to the rusted rocker panel. I just started to remove it and found a lot more rust hidden behind it. As this video is already a bit long, I decided to continue and finish the bodywork in another episode, coming next week.
The complete bodywork on this car took me around 110 days in the workshop. It was much more work that I ever could expect after I disassembled the car. I recorded a total of 1500 clips. On Patreon there's a 2h 40 minutes video available which is an extended more detailed version which includes part 2 and 3.
I hope you like my work and enjoy the video.
Huge thank you to all of my Patreon supporters and especially to:
Adel AlSaffar
Alfonso Baz
Amar.k
Arron Metcalf
August Kupfer
Ben Burns
Ben Sigelman
Bike Kefeli
Brenna Redpath
Bryan Knauer
Chris Walter
Dane Prince
Daniel Shaw
David Lehnus
Edward Conway
James
Jennifer K
John Shebanow
Joseph Kamps
Josh Ledford
Josh Wasserman
Joshua Bentley
Joshua Scher
Kar
Kerem Yollu
Lambda GPU Workstations
Marbor
Marcus H.
Mark Tesmer
Mellissa Marcus
Nathaniel Jack
nick arello
Nick Houston
NoLoneSurvivor
Peter Cyprian
Peter Pearson
potokslow
Ryan Pickett
Scott Tomlin
Stephen Buggy
StevenVR
Tyler Carruth
VaushVidya
Vickie Bligh
Vince Valenti
Will Black
Yale Baker
Aaron Funk
Adam Holtzclaw
Andre
Andrew Lavergne
Arni Bjorgvinsson
Bobcat Johnson
Bonnie Williamson
Brett Pitts
Brian Hoerl
Bruce Bosckek
Caleb Betczynski
Chad Bryant
charader
Chris Faehl
Christiaan Van Eeden
Christian Fjelldal
Damien Fuller-Sutherland
Daniel Varga
Dave Hardware
David Chang-Yen
David P Hruska
Derson Jacomini
Dustin Davis
Dylan LikeBobDylan
Erik Nordby
Gareth Rimmer
ghostdunk
Haley McFadden
Jack Curry
Jacob Hamm
Javiera Ignacia Jeldes Pizarro
Jeremy Cole
Josiah Brown
Joël Franusic
Jörg Thomsen
Ken Rosso
Kevin Rechsteiner
Leevi Kontkanen
Leon Fox
Marc Cerisier
Mary Casella
MDC
Micah Reid
Michael Masouras
Nemo
Omar Domínguez
Peter Read
repülő búgás
Rob Sherfick
Ross Clark
Scott Marshall
Svenja Kuckla
Thanny
Tim
Tim Holt
Trevor Kam
Tucker Ifft
William
Sorry for my bad english, it's not my language. I try my best to improve my technical english.
Thank you for watching :-)
„I make a new one“ T-Shirts:
teespring.com/stores/my-mecha...
My Second Channel:
/ mymechanicsinsights
My Patreon Page:
/ mymechanics
Thank you so much to all my supporters on Patreon!
Without your support it wouldn't be possible to make such a huge and long project.
If you're also interested in supporting this project you can join my Patreon at patreon.com/mymechanics
I'm sharing daily updates/vlogs from the workshop. There's also a very detailed version of this video (2h 40min), which also includes episode 3, along with 110 vlogs that document the whole bodywork odyssey.
Enjoy the video...
Eu estava muito ansioso esperando esse vídeo 🙏🏾🙏🏾🙏🏾, vc é muito fera
MM, the journey you've been on from the beginning with this car has been fascinating and I'm so glad you're sharing it with us. From your buying it to now has been a fun ride. I am so looking forward to the next steps.
Do you and BigStackD coordinate your video releases sometimes? Good stuff.
Keep up the good work I love watching your videos
What is stopping you from sand blasting the car entitely?
I’ve waited 5 months, these 27 minutes just flew by and now I can’t wait for the next one. You are one of a kind! Absolutely mesmerizing
Thanks a ton!
That's exactly the way I feel as well.
Try the second channel videos. They are more frequent
I haven't read your comment before writing mine and I used exactly the same word : "mesmerize". 😀
This will be another Project Binky
From tools and small appliances to a whole damn car.
You never disappoint.
Well, I'm a little disappointed he did look at that rusted chassis and said, "I make a new one". 😉
Right???
@@SirBlade666
😀😀😀
Next up, a Boeing 747.
@@rustyshackleford8982
😀😀😀
I've watched so many car repair and restoration videos on CZcams, I've lost count; however your fabrication skills and attention to detail are at another level. Subscribed! Very nice work.
Glad to hear that, thank you
I take it you ride?
I would have had it stripped and dipped before ANY body work. You have to know what you are working with BEFORE you start any restoration work
My dude, you had me till the fender mirrors. As a sheetmetal worker, welder, and car guy ... this is masterful work!
Thank you very much
100%, not that I'm not a fan of fender mirrors, but as a "restoration" he should have... ya know... restored it... adding something that wasn't there in the first place feels odd and am not a fan of it.
I'm not the biggest fan of fender mirrors but still your work is amazing
All he did was convert it from an American version to the original Japanese/European version. Japan didn't require side markers, and the mirrors were fender-mounted.
Also to @mymechanics, if you are doing that, I assume you're going to discard the Datsun emblems and possibly replace them with "Fairlady" emblems?
What a great episode. You distilled the months of hard work into the essence of all you've accomplished. The filming was perfect as well as the storytelling. You let me feel like I was right next to you and that's awesome. Loved the cliffhanger as well.😉Even though it's a car, and this is a long drawn-out process, it still feels like a regular restoration. Thanks, MM. This is a fun ride.
Thank you very much. Glad to hear that you enjoyed it.
@@mymechanics I absolutely love Datsun 240Z, seing your precision work on it is extremely relaxing.
My only complaint with this series is that it goes by so quickly. I know it takes an insane amount of work and attention to detail to make these videos, but time just flies by so fast watching these. I could seriously watch hours of this and be glued to my seat. This channel is an absolute treasure to CZcams.
I never want them to end...
If you want more, Patreon members get near-daily vlogs, and the full Patreon cut of the chassis video is almost 3 hours long. 😀
Also his second channel covers some food behind the scenes stuff
Who was it said something along the lines of "I love hard work. I could watch it for hours"?
About 20 years ago I was given a 240Z, California car with almost zero rust, but otherwise rough. Had it shipped to VA with intention to restore it. After 2 years of it sitting under a cover, my wife says "fix it, or sell it". I sold it. Watching this video, I made the right decision, I no longer regret not trying to restore it. The skill and the speciality tools needed to do the job correctly are on another level from what I might have mustered. Thank you for helping me see I was not equipped to try restoring it myself.
Thank you for the fantastic and detailed work. I'm not a "car guy", but I can appreciate the attention you have to every conceivable detail on this car restoration. It is also appreciated in how you are making this your own, not just restoring it to how it originally was, but by making small modifications to meet your exacting standards and personal tastes. Thank you again for making great content!
I sincerely appreciate that you do not settle for anything less than perfection. No body filler, welds to replace screw, no weird noises if a panel flexs. This is why your channel is number 1 amongst the restoration community. Also, those Beverly Shears.
I remember that video with the shears and he uses the Gressel Vice also.
Your comment could not put it into any better words.
I think filler is completely unavoidable if he wants a perfect paint job. A lot of those small dents can't be made invisible without filler. But he is minimizing the amount he will need before painting. I'm sure the result will be perfect. Curious which color he will choose. The original one is not very appealing.
What? You don't like poop colored cars?@@JS_Precision
@@JS_Precision He did a poll and the community voted its classic yellow color, tho he could always change his mind in the end
Everyone rightfully always comments on your technical skills, but I'd like to add how much I appreciate how your videos are filmed and edited. It's so relaxing to watch, everything is incredibly clear and up close and you cut out exactly the right amount of repetitiveness.
The most important thing is....no babbling about nonsense.
It's strange how relaxing they are, because (especially in this one) there's always loud noises with hammering, sanding, etc. And yet, they are super soothing to watch.
@@kstarlerYeah, because the sounds match the action, unlike when my neighbour does something similar but much less competently 5 feet from the side of my house, when it's just a temptation to murder - lol
I've become obsessed with how he shoots and edits videos. Because it's just better. It just is. There's a formula to it too. He never fast forwards, and if he does it's very brief and for a specific reason. He shows you exactly what you want to see **for exactly the right amount of time**.
I couldn't agree more. I fell asleep watching it. It is beautifully methodical.
Holy crap seeing those lights reflection just re-aligned it self after the dents was fix is the most satisfying and beautiful thing to look at.
I think of all the restoration channels out there, this one has the best and most versatile range of technical skills, tools and solutions to problems. This episode in particular was wonderful for learning how to approach awkward angles and sheet metal repair.
I have NEVER in my entire life been so obsessed with anything more than I’ve been obsessed with this restoration 😂
check out project binky @badobsessionmotorsports its insane !
It's literally going to be the most impeccable restoration ever done on a Z!
your friend is a friggin professional craftsman to remove all those dents impeccably!! The amount of skill, creativity, and experience is incredible! I love how you’re showcasing his skills here!
Word!
They made a totally custom jig to pull that hood at the nose. That was impressive.
Absolutely smitten with the fender mirrors, and also want to shout out the unreal level of care taken with camera and lighting angles to make the dent removal clear and visible
Thank you for always being considerate of your viewers when you show us welding! Some channels don’t do any editing at all for welding and I’m suddenly blinded by the surprise brightness.
I don’t think I’ve EVER seen this level of meticulous care taken on a restoration of a car. This Datsun is going to be SO MUCH BETTER than it was when it was new, it’s insane. You are truly going to have a one of a kind automobile sir!
At the same time it will be the very first Car With No Sharp Edges™
I don't think even Rolls Royce pays this much attention to their body work.
The legend is back. I can not imagine how much work you have been putting into this project, especially with the filming and editing. Thanks for bringing us along for the journey.
Much appreciated!
As always, your attention to detail is second to none. Most people would just tackle the rust but you go 15 steps beyond that! I cannot wait for the next episode!
Thank you very much :-)
What can I add that hasn't already been said, sublime workmanship that most of us can only dream about...next level. 👍😊
I can’t even begin to describe my admiration for your talents, not only your imagination and skill at tackling the challenges, but your creativity and talent in recording and editing these videos for us to enjoy. As a previous “Z” owner, I can barely contain my enthusiasm for the next chapter. Well done, Master! 👍👍👍 ~ John in Ohio
Thanks a lot for being here :-)
That sound dampening removal was top tier. The unique ways to deal with problems efficiently is why i love this channel.
Your patience and attention to detail are glorious and inspiring. I cannot wait to see the most perfect 240Z that has ever existed!
I want to say that this part of the video was one of the most anticipated things by me this year. I almost never leave comments under youtube videos, but today I want to write a huge thank you. It's so nice to look at the work of a real professional. I can't even imagine how much effort it cost you to do all this and record a video. Excellent work with light, sound, and framing. I have been following your work for a long time and am amazed at how scrupulous you are about every detail in the product. I'm looking forward to the new part of the video, it will be a New Year's gift for me
Absolutely amazing! I could have watched this for an hour, two hours even. I didn’t even notice 27 minutes go by. The craftsmanship, engineering, imagination and improvisation are unparalleled. But the video editing is absolutely outstanding as well. No needless repetition. No drawn out segments on one little task. I’ve seen other channels which have tried to imitate this one - with some success - but nothing compares to the story-telling-in-video on this channel.
Glad to hear that, thank you very much
From the very beginning, knowing your extraordinary attention to detail, I understood that this project would be epic! And I was not mistaken. This is absolute art. Thank you!
Many many thanks :-)
Having restored and modified a few cars, knowing the amount of work it takes !
I always thought that you more or less have to leave some stuff behind, as it would otherwise be impossible to ever get done.
Apparently I was wrong 😍
That being said, my BMW 635 were run here in Sweden and had 3-9 layers of paint, and square meters of corrosion 😅
From tools and small appliances to a whole damn car.You never disappoint.. No talk, no music just work, brilliant.
Оснащенность мастерской и руки профессионала впечатляют! От начала и до конца, и даже палец не дрогнул в сторону перемотки)
Подписка и 👍🏻
And finally, at 19:17, what we were all waiting for. "I make a new one."
Your work is an inspiration, sir.
What's different about this project is not just the size, but the number of surprises you're running into - and, to no surprise, you're masterfully addressing all of them.
Can't wait for the 'et Voila!' on this one!
You would enjoy Laura Kampfs house Restauration Series, I think.
I’ve bit overwhelmed of late. And so I’ve been surprised by how soothing this video has been. Thankyou.
The attentin to detail and the skills involved are beyond phenomenal!
The childish joy I feel when I see “I make a new one”. I’ve said this before, this channel is therapy. Thank you and happy holidays to everyone celebrating. ❤
Thanks a lot for watching :-)
OMG, me too, I legit have a little cheer when I saw that.
Is it really My Mechanics with making a new one?
I bought one in 1970 and regreat the day I sold it .
i haven't seen anyone up till now working in that detail denters don't go so much they just put putty and sand it but this man is out of this world.
I absolutely can’t imagine how much work it was to condense all that work from months into a 27 minute video. You did great work, I really enjoyed the video
Just half of it, the other half coming next week. Thanks
ASTONISHING WORK! It's incredibile how much detail you can provide to even the smallest of bolt and pieces, truly one of the greatest.
I love these videos. No high pitched voice over, no music. Just skilful work ❤
The camera angles while removing the dents was mesmerizing. Watching those dents disappear with the lighting reflections was magical. I'm also impressed at how much your work has a mental release for me that just about anything can be rebuilt, and that every small effort is worth the work. Great Video!
This is award-winning stuff right here. The genre has to thank you for all your efforts in moving it forward. You are a true craftsman in every sense of the word.
You're the only person I have ever known to have the same level of attention to detail as me. It is truly a marvel to watch. Thank you so much for existing and making me feel slightly less alone in this world. And ofcourse, keep up the astounding work 🔥
the paint removal method is the most ingenious I've ever seen, it's also very eco-friendly. Well done.
Finally! The Roman empire and this upcoming release have been sharing space in my mind.
😂
As someone who has been around cars for 3/4’s of my life I have developed an understanding of them. What you have shown is actually serious skill and you should be proud of your workmanship
Outstanding!! I am so excited about watching this come together. Glad you got rid of the Bono and got back to metal! This is going to be a solid great looking car. Glad you are taking us along for the restore, Thank you!
I've never seen someone put that much work and love into something. I am so impressed!
Watching a perfectionist do what they’re good at is just the most satisfying thing. This is beyond restoration, this is pure art. 🥰 thank you for all of your hard work.
Thank you very much as always
Personally I don't like fender mirrors and would have kept the door mirrors but its not my car so my opinion doesn't count. You're a magician with metal and do the most thorough restorations I've ever seen so no doubt whatever you choose to do this 240Z is going to look amazing!
Thanks, I really fell in love with the design.
Incredible. This is art, done by a master craftsman, using the finest tools. The quality of workmanship is inspiring. And the tools this guy has.. you can practically feel the quality of them. The chuck on the drill weighs more than most cordless pieces of junk at Home Depot.
Your work is astonishing, and your attention to detail is on another level. It's beautiful to watch.
Those were the fastest 27 minutes of my life! Thank God you mentioned in the end that the next video will be up next week 😂 Love your genuine effort to restore lost treasures and turn them into works of art ❤ Keep up your good work!
Man, even removing the dents looks like an artform in of itself...
As always, well put together, and can't wait for the next update! Also can't believe it's already been half a year since the first time you revealed this project. x_x
Thank you very much
You restoring this car has given me a new drive into restoring my car. I have nowhere near the amount of skill and patience you have. But i will do my absolute best and definitely use your tips and tricks. I have a 1969 Mercury Marquis
The meticulous attention to detail is as pleasing as ever. Every time I watch one of these videos, I get inspired to fix things, and do it well.
Many many thanks :-)
These 4 little brackets…are telling us a lot about you and your passion. One of a kind, inspirating, motivating. My deepest respect.
Loving this even more than all of your other fantastic work! I'm a PDR specialist working mostly on hail damage here in Austin, Texas and it's so enjoyable to watch your body work techniques.
Absolutely loving this content, really appreciate your fabrication, editing and video style, no chatter, just action. Looking forward to watching the whole restoration, 10/10.
This is the greatest project ever. I used to work in a body shop and we were never as thorough as this. This is what I would consider the ultimate form of restoration. Can't wait for more. Fantastic job!
Я очень восхищён упорством и педантичным подходом этого мастера к каждой детали этого автомобиля, смотреть на такую работу одно удовольствие. Поражает количество навыков и различных техник работы с металлом, разнообразие инструментов и приспособлений, огромное уважение к мастерству и умению делать такие вещи и прекрасные видео. Удачи вам в дальнейшем, больше подпищиков и просмотров.
one of my favorite cars of all time, i am very happy it is being restored in such a good manner, Ive watched most of your videos and theyre great. your craftmanship is awesome.
The best video about car restoring I’ve ever seen. It is also my job so it’s a pleasure to see this work done in the right way
Glad to see you back ! This level of repair is almost unbelievable. Modern day shops would never dream of doing any of these things. The skill and patience that you showed us here is not only rare, it is damned near therapeutic. Thanks for sharing, can't wait for the next episode !
Can I suggest you check out Harrys Garage and watch the restoration of his Lancia Fulvia Zagato ? Very high degree of skills on display there too
Thanks !@@Fernweh1965
Неожиданный конец) Очень качественно всё делаете. Как говорил один человек на шоу по восстановлению автомобилей: "Я старый и помню эти машины новыми, но поверьте они не были так хорошо сделаны как вы сделали сейчас". 👍👍👍
You sir, are an inspiration! The work you do is amazing, this has got to be my favourite CZcams channel ❤ excited to see episode 3!
I had a 73 240 Z many years ago. Very similar color as well. Great cars! Glad you are restoring it.
If anyone deserves your Patreonage it's this guy. Highest quality restoration content on CZcams for years now and extreme attention to detail which satisfies even OCD perfectionists. Outstanding!
Nice to hear that, thank you very much :-)
Absolutely unique.
The way that you film,
Step by step.
All clean and the light, just like a studio.
Have some more!!👌
Thank you.
I absolutely love the attention to the most minute detail given to every single piece of this beautiful machine!
Thank you very much :-)
Knowing how this guy works, this car will be the best looking 240Z that has ever existed
This is museum-quality work. I couldn't be more impressed.
Золотые руки у вас , дали вторую жизнь этому шедевру автопрома , теперь ещё 100 лет будет гонять ❤❤❤
I am in awe of your skill and attention to detail!
This channel is definitely different from other channels. While he can always do similar things, he always goes above and beyond. Each time, he shows us methods that we have never seen before and would never even cross our minds. He obsessively fixes everything until what he does is perfect. As someone who has been watching these kinds of channels for a long time, i can't watch anyone else anymore. Only My mechanics
Unfortunately- though only by a bit- he was my first in the genre. Now I can’t watch anything else but I’m out of his episodes!! 😢
Your creative work has left me in anticipation of the second part for a long time. I truly admire your talent and am excited to see what you have in store for us. Thank you for sharing your gift with the world.
Incredible job and craftsmanship. Moreover it is incredible that the car chosen to restore is this beautiful Datusun - one of the masterpieces of japanese car manufacturing.
Now That´s a happy Datsun! You are the best "thing" that could happen to that car! The hood repair left me speachless...
Thank you for sharing in your perfect ways.
Glad you liked it!
The trick with dry ice was fantastic 👍
Worked like a charm
Wow you’re so lucky to have friends that have the same level of attention to detail as yourself and not only that but highly skilled enough to perfectly correct everything this is an amazing series I’m so keen for more
Simply the best, high quality is an understatement for you. Perfect quality, your time is priceless. Keep going mate!
神のような板金技術！！感心しました。 Your skills are godlike!!
Think about this, guy is not only restoring it, he is also fixing the factory imperfections. He is making an improved version of this car the world had never seen. btw. thinking I have to wait at least a month after this release for a new episode, you cannot imagine how glad I am when you tell me at the end of the video that new episode is releasing next week.
Nice to hear that, thank you very much :-)
3 minutes in and already I've learned 3 new things about bodywork. You are clearly a master of your craft. Thank you so much for sharing, as always!
Glad to hear that, thank you
I'm very excited to see how this goes, thank you for sharing !!
A genuine panel beater. Amazing craftsman. These days they are all only parts fitters. Coming from the transport industry and being a qualified artisan in many fields, it is great to appreciate good workmanship. I still do rebuilds and repairs but mainly on industrial machines. 😊
Normally I dislike modifications, especially to older vehicles but watching this is changing my mindset. I like your style and thoroughness!
Wow. The level of expertise required, the tools needed, the jigs needed, the know how needed, is just amazing.
Thank you very much :-)
You are doing a wonderful job w/this restoration. In the 1970's this was the car to own!
That's exactly what I needed. Such a patience with every piece. Final with this style, will be absolute gorgeous. Thanks a slot sir 💯
I figured a lot of work had to be going into this for it to take so long, and boy was I right! The attention to detail you give for your projects is astounding and makes it wonderfully satisfying to watch. The bodywork alone is just so extensive; really makes me appreciate people who fix up old cars more!
Du filmst immer so viel, dass es nicht langweilig ist aber auch so viel, dass man deine Arbeit unglaublich wertschätzen kann. Ehre wem Ehre gebührt. Du bist was Metallarbeiten angeht echt unglaublich stark 🤝🏻
Metallflüsterer.
@@willemp6432 😀good one gut
你是真正的修复师，佩服您的技术和耐心，来自中国的问候
I don't think I've ever watched a single one of your videos and NOT learned something in the process! Thank you so much for always sharing your talent, your dedication, and your sheer attention to detail! It's beautiful to watch, and so inspirational for aspiring makers like me :D
I absolutely love the despite the difference in scale from your usual projects, your attention to detail is the same. I can really pick up the care with which you approach your projects, and that same energy is still present here despite how much there is to do. My mind was blown by that dry ice trick, too.
Best regards and thanks for sharing this restoration work of yours, which I find very valuable and useful, and for allowing us to watch it.
Absolutely Amazing! Such an artist. You have a rare gift!
As expected, the amount of detail is fantastic. You sir, are a restoration God.😎
No talk, no music just work, brilliant
Many thanks
My man here has changed the meaning of a quality restoration. I'd trust anything to be repaired by him with both eyes closed, fr. Awesome job, dude. Always top tier content
More than 50 years ago when I was about to be married, we met a photographer called Stuart F McDonald. He was driving a new shiny 240Z in Orange. I was very impressed. (I was driving an old Land Rover). He did a wonderful job of the photos and we are still happily together with two half Swiss /half Australian grand children. Great job you are doing on the 24 OZ ( as they were called here). Mike in Oz
I have been an eager and sometimes an impatient follower, returning to your old videos while waiting for the next one. I got your channel recommended when you published your first video. To think it's been five years. And i hope it'll be many more!
I got to say though; i am thoroughly impressed, you reach new peaks on the impressiveness scale with each video, and this one is certainly no exception. The cleverness, practicality; what regular pedestrian think of using dry ice to freeze and harden glue?! I sat in awe, spewing out laughs only induced by the surprise of your ingenuity. What an episode! And the next one is due only in a week!!
The thing that impresses me as well is the cleanliness you impose in your workshop.
Not have i ever experienced such beautiful and considerate workmanship. What an standard you impose on your work. What great five years it has been following you. Thank you very much !
Now that's an early Christmas present! The amount of skill on display is, as always, just incredible!
Happy holidays!