Ford Galaxy Mk3 timing belt change tightened up the crankshaft pulley using an air gun and then I started getting a leak from the gearbox. This video has helped me identify the possible cause and hopefully it was just the vibration that caused this small amount of fluid to leak from the seal. Thanks for sharing this video.
I am glad you find this helpful. Bear in mind, the leak could also be from the crankshaft seal from gearbox side. I suggest you replace them both just to be on the safe side. Good luck
*Hello dear, it is an installation method, but it is not professional. There is five or six inches of plastic, you put it first, put it on the plate, then pull the plastic out and the installation is done very accurately and without errors * 🥰🥰
*Hello! And thanks for the great video! I have a European Dodge Journey 2.0 CRD And this same automatic gearbox is made by Ford and it's bad! And I regret that I was plagued by it!*
Hey mate i have 2017 galaxy tdci powershift, its leaking oil i get a little smoke sometimes coming from underneath the airbox, yesterday i got limited gearbox function. Do you think this could be the issue?
Hi. Yes. You need to line up the flywheel with transmission with the flywheel. On the transmission one of the grip looks different and on the flywheel slightly wider. You need to line up both in the same position. That is all. When refill the transmission please follow the guid to make sure you fill enough. Good luck
@@Stoneforth I have installed the transmission back in, was a Volvo XC60 2014, it does require special tools pretty much for everything, but I did with non of them... appreciate your support
Ford Galaxy Mk3 timing belt change tightened up the crankshaft pulley using an air gun and then I started getting a leak from the gearbox. This video has helped me identify the possible cause and hopefully it was just the vibration that caused this small amount of fluid to leak from the seal. Thanks for sharing this video.
I am glad you find this helpful.
Bear in mind, the leak could also be from the crankshaft seal from gearbox side.
I suggest you replace them both just to be on the safe side.
Good luck
*Hello dear, it is an installation method, but it is not professional. There is five or six inches of plastic, you put it first, put it on the plate, then pull the plastic out and the installation is done very accurately and without errors * 🥰🥰
*Hello! And thanks for the great video! I have a European Dodge Journey 2.0 CRD And this same automatic gearbox is made by Ford and it's bad! And I regret that I was plagued by it!*
Very much appreciated your video. Just like to know the ford transmission you showing and volvo xc60 2012 same automatic transmission
Hey mate i have 2017 galaxy tdci powershift, its leaking oil i get a little smoke sometimes coming from underneath the airbox, yesterday i got limited gearbox function. Do you think this could be the issue?
Good work bro 👋👋
Is the transmission here 6DTC450? Also, what is the code of the part that has changed? thanks.
How to remove the gearbox and replace the sealing ring
Hi my car is leaking transmission and from that seal. But how do I know if the clutch is damaged?
If the car drives OK with enough oil on cold and hot temperature, clutch might be ok.
Hi, there, is there a specific way to install the transmission back in the vehicle...? If it so, in what position should be..?
Hi.
Yes. You need to line up the flywheel with transmission with the flywheel. On the transmission one of the grip looks different and on the flywheel slightly wider.
You need to line up both in the same position.
That is all.
When refill the transmission please follow the guid to make sure you fill enough.
Good luck
Thank you, I thought that I need a special tool for it
@@carlosalcocerlicona8026 they make the special tools for dealers mainly. most general transmission specialists don't have all the special tools
@@Stoneforth I have installed the transmission back in, was a Volvo XC60 2014, it does require special tools pretty much for everything, but I did with non of them... appreciate your support
Hi, what are the symptoms on drive with this issue? My kuga is downshifting from 3rd to 1st and there is no DTC codes
Quick question, after changing seal on ford galaxy 2015 gearbox will I need to program the car and will it start?
Sorry for the delay.
Ford doesn't require any programming. Once you replace the seal, it will work fine. Make sure fluid level is correct.
Hi there, do you know anyone who does repair Ford smax automatic gear box? Please let me know
Where in the UK are you based?
I’m sorry but you ruined a good tutorial with that jungle music. I had to stop 1/2 way through as it was so annoying