Mini bench Lathe Machine 3Ft. @ Rs 77500/- सबसे सस्ता लेथ Free Delivery and Chuck-Motor 9377093780
Vložit
- čas přidán 11. 07. 2024
- Free Delivery in Selected City (Charges will be extra in the deeper region) how to run this Lathe machine. #MiniLathe #Lathe_Price #Lathe_Price_in_india
1) This machine is #Small_Lathe You can use this machine in a small industry, an orthopedic hospital, in the laboratory of the forging plant, and in your garage.
2) We have given a gearbox in this machine, it has 2 levers.
3) In this #machine, we have also given #autospeed and its spindle torque is also very much.
4) In this machine, you have 9 types of feed and you can drop 9 types of threads, if you use to change gear in it, you can feed more and you can drop more threads.
5) The headstock is very important in this machine.
6) The headstock has 8 kinds of speed, but if you want more speed, then we have given a pulley of 2 steps in this machine so that you can get more speed.
7) In this #machine, you can work up to 1600 rpm and a minimum of 50 rpm.
This #Minilathe Machine Price:- 73,500 Rs. Only.
1) यह मशीन #Smallathe है। आप इस मशीन का उपयोग एक छोटे उद्योग, आर्थोपेडिक अस्पताल, फोर्जिंग प्लांट की प्रयोगशाला में और अपने गैरेज में कर सकते हैं।
2) हमने इस मशीन में गियरबॉक्स दिया है, इसमें 2 लीवर हैं।
3) इस # मैचिने में, हमने # डिपोस्पीड भी दिया है और इसका स्पिंडल टॉर्क भी बहुत है।
4) इस मशीन में, आपके पास 9 प्रकार के फ़ीड हैं और आप 9 प्रकार के धागे छोड़ सकते हैं, और यदि आप इसमें गियर बदलने के लिए उपयोग करते हैं, तो आप अधिक फ़ीड कर सकते हैं और आप अधिक धागे छोड़ सकते हैं।
5) इस मशीन में हेडस्टॉक बहुत महत्वपूर्ण है।
6) हेडस्टॉक में 8 प्रकार की गति है, लेकिन यदि आप अधिक गति चाहते हैं, तो हमने इस मशीन में 2 चरणों की एक चरखी दी है, ताकि आप अधिक गति प्राप्त कर सकें।
) इस मशीन में, आप १६०० आरपीएम और न्यूनतम ५० आरपीएम तक काम कर सकते हैं।
1) How can a mini lathe machine be used?
2) How many RPMs can work in a mini lathe machine?
3) How does the surface finish in a mini lathe machine?
4) How is the mini-lathe machine designed?
5) How smooth are the x-axis and z-axis in a mini-lathe machine?
6) How to thread in a mini lathe machine?
7) How to use the change gear in a mini lathe machine?
8) What is the speed of a hobby lathe machine?
9) How to fit the chuck in the mini lathe machine and how to remove the chuck?
10) How to pack BANKA mini lathe machine?
11) How will the BANKA Mini Lathe machine load and unload?
12) What are the free accessories with this Mini Lathe Lathe Model Beau 30-500
13) Why do they provide a square tool post in the machine?
16) Is it necessary to take a table in model BANKA 30?
15) How many models of gear are there in BANKA 30-5000 Mini Lathe?
16) Why this lathe machine does not have a big True chuck suitable?
16) Shoulda Spunk Guard be used in BANKA 30 Mini Lathe?
14) What is the largest cut in Model 30?
19) What is the weight of Model BANKA 30? 200 kg
20) BANKA model 30 mostly runs in which workshop and plant?
1) मिनी लेथ मशीन का उपयोग कैसे किया जा सकता है?
2) मिनी लेथ मशीन में कितने RPM काम कर सकते हैं?
3) मिनी लेथ मशीन में सरफेस फिनिश होती है?
4) मिनी-लेथ मशीन का डिज़ाइन कैसा है?
5) एक मिनी लेथ मशीन में x- अक्ष और z- अक्ष कितने स्मूथ हैं?
6) मिनी लेथ मशीन में थ्रेड कैसे होता हे ?
7) एक मिनी लेथ मशीन में परिवर्तन गियर का उपयोग कैसे करें?
8) हॉबी लेथ मशीन की कितनी गति होती है?
9) मिनी लेथ मशीन में चक को कैसे फिट किया जाए और चक को कैसे चेंज किया जाए?
10) कैसे बांका मिनी लेथ मशीन पैक करने के लिए?
11) बांका मिनी लेथ मशीन लोड और अनलोड कैसे करेगी?
12) इस मिनी लेथ लेथ मॉडल बांका 30-500 के साथ मुफ्त सामान क्या है
13) क्यों ये मशीन में स्केवरटूल पोस्ट साथ में देते हे ?
१४) क्या मॉडल बांका 30 में टेबल लेना जरुरी हे?
१५) बांका 30-500 मिनी लेथ में कितने मॉड्यूल के गियर हे ?
१६) क्यों इस लेथ मशीन में बड़ा True chuck स्यूटेबल नहीं हे ?
१७) बांका 30-500 मिनी लेथ में स्पेलश गार्ड लेना चाहिए?
१८) बांका 30-500 में बड़ा से बड़ा कट कितनी होती हे ?
१९) बांका 30-500 का वजन कितना हे ? 200 KG
२०) बांका 30-500 ज्यादातर कोनसी वर्कशॉप और प्लांट में चलती हे ?
Height Of Center: 150 mm
Spindle Bore: 20 mm
Admin Between Center: 500 mm
Bed Length : 3 Feet
Spindle Speed: 1200 RPM
Bed Width: 180 mm
Cross Slide Travel: 175 mm
0.5 HP Motor 3 Phase, R/F Switch, Quick Change Tool Post including with the Machine.
General Maxi Lathe.
For More Info Visit Us :
www.ravimachines.com
Product Link:- ravimachines.com/product/mini...
Special price to call Mr. Taufiq:- +91-9377093780 Sales Manager
Whatsapp:-
wa.me/919377093780
Facebook:-
/ ravi.machine
Our Photos Album:-
photos.app.goo.gl/tzHT6KyGQUq...
हमारे दूसरे लेथ मशीन के वीडियो देखने के लिए यहां क्लिक करें.
• Lathe Machine 6 Feet -...
• Lathe Machine Model 43...
• How to measure vibrati...
• क्यों कौन पुली लेथ मशी...
• Lathe Machine - Model ...
• Lathe Machine All Gear...
• Heavy All Gear Lathe M...
• Lathe Machine 3D Render
0:00 what is the video topic?
0:55 Live cutting on mini-lathe.
1:17 Mini lathe all features explain.
7:34 How to pack and dispatch?
8:39 How many Accessories are free?
Sir Ceiling fan stater grender machine ka price kitna hai
Thank U very much ...fr every minute detail explanations ...greater machine
Thank you so much sir.
Kash me ye le sakata ye machin mera dream hai but mere pass itne pese nahi hai me to ghar par banane ka video search kar raha tha but ye machin bahut aachi hai par sayad meri kismat me nahi
Ak time asa bhi Ayega apko Ye machine bahot sasti lagegi.
Aap mayush na ho.. Aap Rajkot avo or Yaha 2 din ruko Machine ke saath Kam karo or apka dream pura karo..
very good packing
Hello sir Exlent video I am so like it ....👍👍👌👌👏👏👏👏
So nice of you And Thank You Sir
Wonderful perfect you doing excellent internation standard
Thank you so much
Wonderful you made the great machine one of the best i love to buy but hard to get to pak
Thanks for liking
बहुत बढ़िया मशीन है और अच्छी जानकारी दी वीडियो में बहुत साफ स्पष्ट जानकारी दी गई है इसीलिए गुजरात वालों का मैं फैन हूं
Very nice machine
Nice work
Thanks for demonstration
Would you please tell me how much the minimum rate of this lathe machine
I am interested to buy one
Thank you
Bahut badhiya
बहोत बढिया
थैंक यू वेरी मच
Miniature lathe is superb
Your explanation is also good
I would like you to make a mini auto lathe.
Absolutely a good job from your company so keep it up.
Thank You So Much.
@@BANKAMACHINE 0 m mm
Good lathe machine sir
Nice achha laga I am lathe operator
OUR SEALS PERSON NO.7046811811.
Maine machine order kar di hai i hope jald se jald mere pass machine ajaye wait nhi ho rha mujhe exited hu me bohot machine k liyee or ha guys bohot badiya machine h keep support banka machine 😍😍
हमारा यह वादा है कि मशीन आपकी उम्मीदों को पूरा करेगी।
बहुत ही शानदार प्रदर्शन...लेकिन किमत कितनी है
Superb lathe machine 👌👌
Yes, thanks
اسلام وعلیکم بھای صاحب بہت خوب جناب اللہ تعالی سب کو اچھی امل کرنے کے توفیق عطا فرمائے اور بہت ساری خوشی یا دے اور کبھی کسی کا محتاج نا کریں اور دونیا اور اکیرات میں کامیاب کرے امین
धन्यवाद
does it have a wet or dry head gearbox ?
I also like this type of lath machine iam from ktm nepal
Please WhatsApp wa.me/919377093780
Sir is machine me 30inch length aur 35mm diameter Wala shaft ka kaam Kar sakte hai Kya.
Our Sales Parson No. 9377093780
Very attractive and useful
Thank you
nice machine
Nice machine sir
Thank You Sir.
Bhahut acchahe
Sir me leht ripering karta hu
Apka machin bahot badiya he
धन्यवाद भाई
Very nice information video
Thanks
I love lath machine
Thanks a lot
I wish this mini lathe had a drive shaft instead of relying on the lead screw for power feed and a 1 HP motor as 1/2 HP do not generate enough power for some operations. It would have been be perfect for me with those two improvements. I hope banka make these improvements in future.
आवाज को क्या हुआ था? बिमार लगते हैं. आपका यह उत्पाद बहुत सुंदर और user friendly है. मै भविष्य मे खरिद लुंगा.
Can we do jobwork on all kind of material such as en31, die steel and other hard material
Ótima ferramenta,belo torno.
Obrigado por seus comentários. czcams.com/video/ozB_tLByhKw/video.html
Best bench lathe ever seen 🔥🔥🔥👍👍👍
Hi
धन्यवाद
જબરજસ્ત ભાઈ....
thank you
Beautiful
Thank you
Very nice 👌
Thanks 😊
Thanks sir..
Welcome
What diameter minimum and maximum we can do turning
And feed cut how much we can do
I am using this machine for the last 3 years. Very good machine, not like chineese mini lathe. Banka's customer support is also very good. For any doubt they reply immediatly .
I like your comment, because people generally makes comment while they disappoint.
what cost in dollar?
ravimachines.com
Verry nice sir..
Thanks and welcome
I like this mini lathe machine
Thank you sir .
Very nice machine.
Very nice machine & very good profomesnce
@@baburao9817 b
Bhaskar.s.aher
5i@@baburao9817
Bohot achaa sir
THANKS
Very nice mchine
Thank You Sir
do you have hobby lathe? like db200?
If useful,will order 1 of this for our toolroom,please educate us on this
I have Chinese mini lathe c3 for the past 5 years. Hats off to your machine it looks great. Once the covid19 problem is over ill buy your machine . I live in Chennai Tamil Nadu. Do i get a free delivery or you charge
Yes, Free Delivery to chennai city.
Thank you. I'll order once this lock down is over.
Please send your details by whatsApp +91 9377093780
@@antonyfernando8869 how much does c3 cost?
Veri veri good
What type of spindle bearing does it have? Tapered roller? Or normal.
What is the power output of motor?
And how will I lift it and install it in my garage?
Yes it has taper roller bearings, 0.5 HP electric motor. czcams.com/video/AaIe2luYtKw/video.html watch this video till last you will know how we deliver and installation
I want to see more videos 😊
Awesome machine, I have wanted lathe machine of this size for a long time. Last time I ask you, you told me that you can not shipped to the North East, can you ship it now?
Raltanwnkima Kawlni Sir Please Contact Our Sales Person 9377093780
Beautiful mini lathe machine sir... Can you shift to Malaysia sir... And also how much the price again.... Thank you for your cooperation.
इस मशिन कि किमत कितनी हैं ?
69000 with gst
69000+ GST 18% = 81420/-
Delivery Charges will be extra in deepar region..
Good
Thanks
Mast sir
Thank You Sir
Can it able to make punjabi kara/finger rings jewelry in stainless steel, copper, aluminum material ?
This is great.. I used see such machine only in other countries like USA or some cheap Chinese .. I am happy to see it here in India.. I searched a lot really I was not able to find on any website .. what is the plan to deliver it in Delhi NCR.
Thanks for watching our video. Yes we will supplied Lathe machine in Delhi. regarding Purchase call Mr Taufiq - 9377093780 - Ravimachines.com
Wonderful
क्या इस मशीन से लकड़ी पर भी काम किया जा सकता है?????
Needs a milling, drilling and lathe combo. Do you manufacture? If yes then what is minimum size ?
Sorry sir we don't have such type of combo machine
Excellent
Thank uou
Hi sir mai aap k videos dekhta hu Dubai se sir pls lathe machine pr Dro with scale kaise set krte uske upr ek video banai ye pls
for delivery the machine in Pokhara Nepal, total how much cost in Nepali currency . nepal tak lane ke liya mujhe kitne paise dene honge nepali currency mey ?
I enquired for mini lath machine so many videos on site but no further cotact from company pl look forward for customers enquiry
Sir mini lathe 1phes motor me chlsakta he
sir 3fit ki mashin hai ya
kharadane ke liye
loha kitana fit ka chadh sakata hai
i want to buy one ... this machine look good ..... one problem is 3 phase motor .... it should be bldc 800 wt moter with electronic control ..... so we can use veritable speed as per job requirement ....
Hii Raj , Kindly discussion with our sales Manager Mr Taufiq 9377093780 for special requirement
Beautiful mini lathe machine sir.... Can you shift to Malaysia sir....and how much Again the price convert to Malaysia sir.. Thank you for your cooperation.. God bless you all.... "
Yes sir, We supplied in our all the world. if you need any technical details and other details whatsApp in this number +91 9377093780. They given you all details.
The price is 3700 ringgit Sir....
Ap 10 to 12 fit ka ladmachine dikhaiye
What is a maximum cut that machine can take
B R Sudani jay mataji Surashingbapu
Thank you. Babubhai
Ye mini lets Ki price Koya hai
upto how much mm of OD this can turn?
Good luck 👍😉
Thanks! You too!
#jangraartscrafts very good machhin
Good sir
Thank you
Ok
Really good product. Do you supply to Australia, Melbourne?
Yes, Please WhatsApp wa.me/919377093780
Nice
Thanks
Sir i need 3 fit leath machine but i fram nepal nepal have banka show room if have whare can contyk me
Please WhatsApp on 937 7093 780
v nice i like
thank you
Sir hame 10'6"16"center chahiy kya price hoga aur company contact chahiy
Can we attach ID & OD grinding attachment on this machine?
No, because of this machine is very small
how can i access your machines tipes and full specs?
i think it suitable for competing chinese lathe
Through CZcams and Website ravimachines.com
Machine ko fitting karane keliye kya subidha hai
Very gd
Thank you
Any attachment for tapper and keyway cutting
Istalment ka system bhi hai kya
What is length between center send me total detail can u give tail stock hydraulically operated to drill upto 150mm 40 dia
ThanQ so much sir.
Most welcome
लेथ मशीन से क्या -क्या चीजें बना सकते हैं।
कृपया मार्गदर्शन करें।🙏
Change cylinder bore
OUR SEALS PERSON NO. 9377093780
Bench lathe machine ke liye quick change tool post kitne Ka parega
Surendra Jauhari Sir Bench Lathe ke Liye Quick Change Tool Post Nahi Hai sir Hamare Paas.
Thankyou banka
What is the max shaft diameter the chuck can support ?
80mm Shaft Dia
Good product.. I am interested. But you have not mentioned about two types of job holding guide. Guides are necessary for small diameter long shatf when turning and theading.
Thank you.
What is the maximum depth of cut on a 20mm Dia MS rod ?
3mm
Is it possible to make internal gear in lathe machine.
It is possible on slotting machine.
Sir, 7 feet Leth havey duty with gear box, what's price
ravimachines.com/product/all-gear-lathe-machine-banka-50-achiever/
Our Sales Person Number = 9377093780
Sir is pe kya kya kar sake te hai is pe to welar ka rim ka sleep laga sakte h kay
ये मशीन का डाया 300 MM और उसका लेन्थ 500 MM हे। ये मेज़रमेंट में आप काम कर सकते हे।
👌👌👌
Thank you