New Receivers from Lemon RC
Vložit
- čas přidán 21. 08. 2024
- Lemon DSMX and DSM2 compatible receivers have been redesigned and are better than before. Now in the budget friendly 7 channel and 10 channel stabilizer, you get reliability , telemetry, dual diversity , full range receivers. Fly with confidence.
www.buddyrc.co...
www.buddyrc.co...
www.buddyrc.co...
Nice got mine set up using this video. Its a 7 channel in a Omp Edge 540 60" PNP. Also have the TX16s. Such a powerful radio with no limits.
Thanks, I was stuck in configuring my 7 channel gen 2 lemon rx. You tutorial saved me! Really appreciated!
Seems the Lemon receivers are about 1/3 the cost of Spektrum now! I bought a few 7-channels, both with and without stabilization. Now I know what to do with the voltage sensing wire - thanks. Transmitters...from watching this it looks like I can get another Spektrum NX8 or try this Radiomaster. Guess I'll check them out.
What a literal pain in the ass compared to setting up a Spektrum rx.
I agree, but Lemon receivers are half the price. That is the BIG advantage to Lemon and I don't mind spending a few minutes extra.
Hmm
2 other benefits in addition to what @dward4644 said. The lemon telemetry is full-range, Spektrum receivers only have fly-by range (unless you get a higher-end model). In practice even flying at a small field, my Spektrum planes are often out of telemetry range. And, the lemon RX is available with a power meter (voltage plus current) so you can track mAh used. This is more accurate for a low battery warning than voltage alone.
I agree that the setup is convoluted and would require the manual nearby. Spektrum's forward programming is a lot more visual, although I find there are still a lot of options to wade through.
I bet thinking is Hard, EH?
EXCELLENT video! Took me a while to find it, but I'm glad I kept looking. Was starting to think I couldn't bind it... I'm not seeing the stabilization go on and off with the switch, but thinking it is because I made it stay "on" all the time. Hard to believe these RX's don't come with instructions. The Reset was a nice add, too. (Bought my RX from you guys, too!)
Lemon RC was a key reason I could get into the hobby, being so much more affordable than spektrum and more reliable than orange. Wish I could find someone for affordable Taranis RXs
Good
Awesome new receivers, excellent features for the price! Thanks for that great demo.
Our pleasure!
Nice video my man thanks. you may already be aware that you assume a fair bit of prior knowledge on the behalf of the listener though
I just picked up a couple of 7 and 10 receivers. I've liked the the older receivers. Havent tried the new ones yet.
I love Lemon, all I use. I always thought they made a better, more reliable RX with better diversity and polarization options. But man this new 10 channel telemetry rx with plugs on opposite ends, inches from each other. That is going to be a monstrosity in my already rat nested jets, and a sloppy install In 3d or other planes. Stuff might not even reach and possibly would have to use extensions. I always credited Lemon for having really nice board population. But not so much on this one. I feel like this time it is a case of the engineer not being a end user. Hope they keep making the regular 10 channel diversity receivers now that they can all actually be used with the NX10.
Pretty awesome video and review! I have read the quick guide and a few passes of the full guide but watching you video was much easier to understand. I´m about to give it a try. I was also looking for the meaning of the sensor. Now I know it´s a voltage probe, the one with the metal pin. On the manual says it goes only up to 5S (max 22V)? I ask myself what would go wrong if I connect it to an 6S. Also my older Lemon came with another sensor which seems to be temperature in a place for desire. Like ESC or Inrunner motor (?). I have bought also the current sensors for XT60 (I did not check before up to what current but I think not more than 70A) and also one with EC5 that should work with 100A or more for my EDFs. This are really cool Rx for the money!
Nice job Dan!
07:26 I didn't know these would self level..? I want 3 of this kind.
I wish they put all 10 channel's on one side of the receiver. Its kinda silly to have them the way they do
I'm going to purchase this rx after watching your great video. I'm also eyeing up your upgrade gimbals!!
Bought the Lemon RX7 (LM0086) Oct.2023 and binded to my Spektrum DX6i. Flashing orange LED light changes to flashing green, then SOLID RED (meaning binding completed) and servos would work but not the throttle, (motor not powering up?). Continual Beeping sound. Motor and ESC working fine when using a servo tester but plugging into Lemon RX...no working throttle, just a continuous beeping!
Resolved!!!! Throttle Trim needed lowered! About 10 to 12 clicks down on the throttle trim and the beeping sound disappeared and throttle stick started working! This happened to me only once before (on a different RX and Transmitter) and took me over an hour to remember what was going on!
Thanks for your tuto. Where can i do connect the flaps please ?
Can reverse thrust. Be set up on this reciever when it's used as a 6 channel .But it defaults to channel 7 for gyro on off
Great video!! with one is better for Big Horn 49? 7 or 10 Channel?
Thanks for watching! The 7 is more than enough for the big horn. You really only need 6 so you'll have a extra channel for lights or some kind of add on.
Give it some throttle in failsafe? I don't think so. Why did they waste a channel with a servo port to control the gyro modes? Why not put the gyro modes on channel 8 and the gains on channel 9?
I followed your vid step by step with same radio, and no luck getting stabilization mode to work on a switch. Frustrating rebinded about 3x, still no luck, I even changed the channel to 5 and no luck. any help?
I have the lemon 10ch stabilized rx. I have set r1+r2 red leds on and green led on for always on,but it does not seem to be trying to stabilizing.when I move the receiver quickly and none of the surfaces move to correct. What am I doing wrong?
What i dont see is there a way to switch direction Without reverse each surface independently thank you
Is it possible to have the stabilization when activated Backwards ?
Thanks for watching! Yes you can but you will need to change the orientation, stock is pins towards the tail. Hope this helps.
@@BuddyRC. Not sure what you mean. Please explain.
Thank you
@@BuddyRChello….tried doing what u said to no avail, ail are ok, rudder and elevator backwards .
Figured it out.
Hi All I have just received my 7 channel Rx and having tried a number of times I just cant get it to stop on Standard Model type tail ie R1 and R2 lit. I double press when R1 and R2 are lit but when it settles down it always has R1, R2 and R3 lit. ??
Thanks for watching! Have you factory reset it? try that and then try the procedure again.
Thanks very much I will try. Yes It worked after the reset. Thanks again
Please do the same video using the Spektrum DX9 Black Radio instead of the RadioMaster TX16 so that we can learn what features the Lemon RX show on the DX9 Black radio. Thanks in advance, excellent video.
Sorry we do not own a DX9
There was not enough info to understand programming as shown vs blinking. Thanks for trying.
You're welcome keep watching for more videos
is the satellite rx port on Lemon Rx DSMP 7-CH for connecting a satellite rx only ?
or can that be connected to DSMX port on some Flight Controllers ?
ie, use Lemon Rx DSMP 7-CH as a satellite rx for the flight controller.
Thanks For watching! The port is just for the satellite rx only. I hope this helps.
excellent tip about ch8. what numbers on the gains in the transmitter should i set if i program ch8 in the slider/potenciometer in the radio, max or middle or minimum or does not mater? Thanks
Thanks for watching. Use 0 to 100 (minimum to maximum) hope this helps!
@@BuddyRC ok , so if i left the gain in the transmitter in for example 12oclock the know on the radion for channel 8vwill go from 8oclock to 12oclock only? or it will go to 4oclock with is the max gain in the receiver? i hope you can clarify. thanks again for answering!!
@@alexherrera3918The manual says: "If you have Master Gain (channel 8), check that it is set it to the middle of its range" for the first flight. To me this sounds like the master gain uses the full -100 to 100 range. Since the middle of the analog dials gives 0 on my Radiomaster, I assume that 0 is "normal gain", positive numbers are "more gain" and negative numbers are "less gain".
hi , i'm wondering if one has to upgrade to edge TX to take advantage of of the telemetry options??
I'm not getting any voltage readings in the telemetry.
A2, A3, RB1V, RB2V all show 0.00
what can be done about this?
alt seems to be working.
Thanks for watching! How do you have the telemetry set up? Do you have the widget set up? What radio are you running?
@@BuddyRC TX16s.
I'm just looking at the telemetry section of the TX16s. and there are 23 items listed.
altimeter, temperature, trss etcs seem to be working fine, but all the voltage readings are 0's.
and I am using Lemon Rx DSMP 7-CH
I figured this out.
need to calibrate the voltage reading following the instruction manual.
it's working now.
How about a Spektrum Nx setup ?
the voltage telemetry works also if i used two batteries with a y cable? If so , how can i connect that telemetry wire? thanks
Thanks for watching! It will only work with one battery because it uses the balance lead. Hope this helps.
@@BuddyRC thanks for the clarification!!
Can the variometer be used with sound? I was going to buy the frsky receiver with vario but apparently it doesn't work with the tx16s?
That is done on the transmitter
Is it just Stabilizing no auto level ????
You can't see anything your doing on the transmitter. It's washed out
It's not easy with the studio lighting but we will keep trying.
I still don't get it... Why is there still merely a double sided tape to mount this peace of (precious) equipment... It seems no brand takes its product seriously...
How about if I'm using nimh 6v battery. That voltage wire just connect to negative of the battery? Ty so much :)
Connect to the positive node of the battery.
does this receiver have SBUS output somewhere ?
Thanks for watching! Spektrum doesn't do sbus they only use the satellite rx. Hope this helps!
Audio is way too low
Great video One ? Would u trust this a a edf
Yes of course
What's the significance of putting g it into an edf powered model, as opposed to propdriven?
Bad bind, your still flashing orange.
Nope
1:30 into vid, it's in bind mode but 1:45 it starts flashing again as he says light is now "solid"! At 1:30, light is flashing faster than at 1:45 which is probably not really flashing at all but just the recording frame rate (shutter speed) of his camera that makes the light appear to be still flashing! I believe him when he says it is solid, but maybe he should have mentioned the camera recording is deceiving?
does this have a self level function, like the ar636
No. The new Lemons are Rate mode (AS3X) stabilisation only.
How to you get channel 8 with a 7 channel reciever
You can't, it is a 7 channel receiver
Hi Charlie…I believe he is talking about using channel 8 on the transmitter (not receiver) for the gain control.