Uncasing Epson EcoTank & Fix Error 202260 WiFi is Out of Order
Vložit
- čas přidán 28. 07. 2024
- In this video, we demonstrate how to access the main board of an Epson EcoTank printer and remove it to fix a faulty or missing wifi board. We take the viewers through the step-by-step process of opening up the printer, detaching FFC cables, unscrewing screws, and detaching the main board to access the wifi board. She shows how to fix the issue by replacing the wifi board and putting everything back together. This guide is helpful for anyone who needs to troubleshoot wifi issues on their Epson EcoTank printer. We will post the link to the whole CZcams video in the comment section.
For other helpful videos, go to / bchtechnologies
For printer repair:
🢡 Visit us: BCH Technologies, 506 Radar Road, Suite B, Greensboro, NC 27410.
🢡 Send the printer for repair! bchtechnologies.com/printer-r... Yes! We repair DTF, DTG, and sublimation printers too!
🢡 Donate your printer to us! Contact support@bchtechnologies.com
More support options for your printer device are available at support.bchtechnologies.com
Continue the Conversation: support@bchtechnologies.com
FACEBOOK: / bchtechnologies
TWITTER: / bchtechnologies
INSTAGRAM: / kevinatbch
LINKEDIN: / bchtechnologies
TIKTOK: / kevinsinknmore
SHOP NOW: bchtechnologies.com
About BCH: BCH Technologies is an innovative company focusing on ink and related products. Founded in 2011, the company transforms how people and businesses refill their printers through innovative technology solutions. Our core purpose guides the research direction of 1) preventing land waste and 2) bringing customers better products with lower costs. Every day, over one million ink cartridges are thrown into landfills worldwide. The company has focused on working with businesses of different sizes, from Fortune 500 companies to entrepreneurial starters, to develop custom ink, spanning from printer ink to stamp ink, re-entry ink, indelible ink, redaction ink, invisible ink, and more.
This video was produced by Kevin at BCHTechnologies.com.
00:00 Epson Error 202260
00:00 Introduction
00:40 Remove the side cover
01:19 Expose the Waste Tank
02:14 Remove FFC Cables
02:59 Remove Mainboard - Jak na to + styl
This is something Epson should be responsible for
It actually fixed my wifi problem, since I already had a wifi chip already in I just took it out, blew it in and the port to remove any dust and pressed it in firmly. No more wifi issues and no errors… so far
I followed all the steps and succeeded great fully, in my case I just disconnected the WiFi module, cleaned and re-connected back to the board, and it’s working again.
It was a little tricky to remove the panels, but eventually made it
Thank you so much for this video, I did it just cleaning the main and Wi-Fi board with an electronic disperse by SABO and just plugged it in again and it works perfectly!
My wifi part was Epson 2207229 Wireless Module, got it shipped from Prime Parts $40 CDN. The scanner bed is difficult since she doesn’t show it well but slides on plastic shaft pins. Broke part on mine but glued it back. Working unit !
Thanks this was great!! Do you have a link for the Wi-Fi board?? I need to replace mines
Thank you
Thanks master
Hey there any ideas where to get the WLU6320-D69 in the UK
Tenho que tentar fazer isso aqui
Which wifi board is it?
I took apart my printer to try to fix the wifi board and now I cannot reattach the scanner and lid. Is there any way to show a close-up diagram of how to do that? Since the printer in the video is black, I am having a hard time getting a close-up of how to detach it and where the screws are located.
Question: would you happen to have the model number for the wifi card? I have an EcoTank L6270. Also, do you Sell the card?
I had this eror and i unpluged the printer and my router from power about 7-10 minutes, after i pluged back my router and wait to correctly connect back all lights, after this conected back my printer and ghes wat, my printer (Error 202260 WiFi is Out of Order) it,s gone and immediately appeared a mesage to update my firmware, i updated my firmware and the wifi now works fine.
Tried it, doesn't work. still the same error
Where would I get a Wi-Fi board? I’m getting the same code
Same question
X2
Same question../
@BCHTechnologies I was able to fox the wifi card but after i put it together now i het 3 blank pages and says paper out. What did i do wrong?
You have forgotten to connect one of the wires pack...maybe the paper sensor.
I just re-seated my wifi board and it works! Thanks for the video!
Do you know why this happens?
no, but likely poor contacts or solder joints on the wifi board.
all nice but that is not something a regular user can do. Just bad quality from Epson I would say. Using this printer for just 3 years now and this is the problem already.
I had mine for 3years too! And it's giving me this code
Hey, Kevin the nozzle is ok in epson printer, but still the lining comes, what adjustments and alignment have to be done, plz make a video
That's weird. Are those lines vertical (perpendicular to the printhead movement)?
@@BCHTechnologies no it's horizontal brother
Then I would worry about how the ink is fed into the printhead. Are the stripes uniform and small, or is it large and sometimes skip the whole section?
@@BCHTechnologies yes it is small almost 1 centimeters gap between 1 line to 2
@@BCHTechnologies ink is genuine and I always putt it gently
I just plugged it via cable, these Epson guys will not make me buy a printer again after 2 years and very few prints... Epson: first and last time I purchase a printer from you, got it?
That's printer surgery I'm not willing to do ... WTF???
Do you think the world care what you are willing to do?
yes, if you are a bit tech savvy you can do it.
@@salmanrashid6245 Unfortunately, I’m not. I don’t think that a customer should have to do such lengthy and dangerous job after spending money for the product. 😓
@@sandracarli1110 you are absolutely correct that customers should not have to do it. I did just fix mine but 'I am quite tech savvy. If you lived close by I would help you out for sure.
@@salmanrashid6245My printer is quite new and I am still having problems with it. Sometimes it says there is no connection, sometimes it says the spooler has a problem and sometimes it prints without problems when it feels like printing... That makes me angry.
I had a second hand (!) HP black and white printer for 10 years and it printed so well without problems so I really am not used to such bad performance.
Thank you for your kindness. Too bad we are not neighbours. ;)
This is completely intentional from Epson. I see that almost every user get this wifi error after 2-3 years. My printer is stationary at its place for years, how does a chip that kept very well got faulty all of a sudden? Chip lifetimes are much much longer normally. Never buying an epson again.
I have the same problem, and I just power it on to print, otherwise is powered off, which would account for 99.9% of these 2/3 years!
So yeah, programmed obsolescence probably.