I make a Metal Industrial Style Shelf Bracket with a Turnbuckle made from Rebar Steel - MIG Welding
Vložit
- čas přidán 12. 07. 2021
- I make an Industrial Style Shelf Bracket with a Turnbuckle that I made out of Rebar Steel to use inside the shelf bracket. I love the look of industrial furniture and all the decor that comes with it, and this shelf bracket has the look I like. A nice MIG Welding Project using rebar.
The small rebar I cut from the mesh is a bit under 5mm the large rebar is 7mm.
I hope you enjoy my video of the steel rebar knot shelf bracket project, it was a lot of fun to make
The main tools used were a MIG welder, angle grinder, drill, and bench vise.
Tools / Supplies, I often use are.
Marking out Tools
Markal Silver-Streak Metal Marker Round: amzn.to/3mTJDHt
Milwaukee 4pk Inkzall Black Ultra Fine Point Pens: amzn.to/2WKKpeE
Milwaukee Inkzall Jobsite Fine Point Black Permanent Marker 12 Pack: amzn.to/3kHrXfo
Locking Pliers - Vise Grips
MILWAUKEE 10” Locking Pliers, Curved Jaw: amzn.to/3zzJH2u
Milwaukee 6" Long Nose Locking Pliers: amzn.to/3jyVLeS
Milwaukee 6” Locking Clamp Regular Jaws: amzn.to/3jB94eI
KNIPEX Tools Long Nose Grip Pliers: amzn.to/3ByD1SP
Magnets
Magnetic V-Pads Kit, Magnets On Both Pad Face & Bottom: amzn.to/3DCya4W
Mini Magnetic Fabrication Square Magnets Angles: 30°, 60°, 45°, 90°: amzn.to/2WN9Fkr
“L” shape Corner Square Magnets 12°, 90° & 60° Angle Setting: amzn.to/2YaZXsU
My camera set-up.
Canon EOS M6 Mark II Camera 15-45mm Lens: amzn.to/3DNnn83
VideoMicro Rode Compact On-Camera Microphone: amzn.to/3QkUBnK
Camera Tripod Vanguard Alta Pro 2: amzn.to/3yB8hP5
The Brand of the Drill bits, and cutting/flap discs, is "Alpha" If you can't get them at your local hardware shop, here is a link to Alpha Tools: alphatools.com.au
As an Amazon Associate, I earn from qualifying purchases. This means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make more videos like this one. Thank you very much for your support!
►►Subscribe to our Channel for more videos ►► bit.ly/2ULxLJogavinclark
Always use all the correct safety gear, and use your tools safely, I am not a good role model for this.
Hope you found something of use in my video or at least found it entertaining.
Gavin Clark DIY - Zábava
What is really great here is the use of the bare minimum of tools. For cuts, grinds and bending - he’s not using a horizontal/vertical band saw, bench/pedestal grinder, drill press or floor mounted stock bender that many would consider essential for this kind of work. He’s just using an angle grinder, sturdy vise, hand held drill and pieces of stock to bend around by hand for the most part. He does not have (or at least isn’t using) much more expensive tools to do this work. Gavin shows that a person on a very limited budget for tools, can create incredible looking work, if they have a desire and a work ethic. A great inspiration right there in and of itself for any guy or gal who wants to do artistic yet utilitarian metal work.
Yes, exactly! Professional projects for the beginner willing to be accurate and put in the effort.
Thank you very much "Comfortably Dumb" I appreciate your comment, I like to keep it simple and I enjoy the process of making things. Thank you for your comment, you are spot on to what I am all about. Keep safe.
Thank you very much, Building Stuff.
Вы правы, если человек с минимумом инструмента может делать красивые и практичные вещи это отлично. Но это в том случае если вы хотите сделать одну вещь. Если их нужно скажем десяток, это будет очень долго и утомительно. Станки ускоряют процесс, чем больше станков тем быстрее вы сможете выполнять отдельные операции. К примеру здесь очень много подпиливаемых углов, все элементы можно собрать в пакет, и отпилить разом на той-же ленточной пиле. При сокращенной длине ролика, который снимался скорее всего не один час, умножте это время на десять, если необходимо десять изделий. И вы уже получите не рентабельное изделие. А ускорение всего одной операции приведет к выигрышу времени и сил возможно в несколько дней. Оцените стоимость своего рабочего дня, и посчитайте стоимость ленточной пилы хотя-бы б. у.
@@user-ly2oi4li2e Я согласен с вами на 100%, я делаю это ручными инструментами, я снимаю сам, это требует времени. Если бы я должен был сделать 20 и не снимать даже ручными инструментами, теперь у меня есть шаблон, все отверстия и вырезы были бы сделаны до того, как сварить его вместе, кучу быстрее. Или сделайте это с умом с помощью станка с ЧПУ, и дешевые рабочие снова будут лучше. Спасибо за ваш комментарий, я ценю ваш вклад, Берегите.
Great!! Artisticus!!
Perfect, just perfect !!
Thank you very much, I appreciate your comment.
Wow I saw the thumbnail and was yes must watch
Thank you very much, I am glad you liked it.
Love those!
Thank you very much.
very cool
Thank you very much.
Another fantastic project!
Thank you very much.
I must of missed this video that looks awesome great job
Thank you very much Bradley, I appreciate your comment.
Bravo!
Thank you very much.
Good stuff 🛠️👍😊
Thank you very much, I am happy that you liked it.
😃Show Man ,this guy is good👏
Thank you very much.
Great work brother
Thank you so much. Cheers
The uncle a lot if teenage boys need these days.
Yes, I agree, very few dads etc have any skills now and working on cars is fading out too, so the training of future of handy people is not looking good. Thank you for your comment.
Brilliant 👍👍👍
Thank you very much, I appreciate your comment.
Sản phẩm của chú làm rất đẹp, tinh xảo. Đơn giản nhưng đẳng cấp. Very good.👍
Cảm ơn bạn rất nhiều, tôi đánh giá cao nhận xét của bạn.
Viejo, sos un capo.
Muchas gracias, solo soy soldador, agradezco tu comentario.
Very artistic.
Thank you very much.
Professor Clark at it again, schooling everyone on how to make another awesome shelf bracket. Always impressive!
Thank you very much, I am glad you liked it. I appreciate your comment.
Super cool.
Thank you very much.
No capricho👏👏👏👏🙏
hello super sympa et magnifique bye bye ( France )
Merci beaucoup, je suis heureux que cela vous ait plu. Salutations d'Australie.
Sir you had done the perfect (art) bracket.
You got clinleness in you's work.
👍👍👍👍👍
Thank you very much, I am happy that you liked it and I appreciate your comment.
Good day sir gavin always watching frm the philippines
Thank you very much, Greetings from Australia.
@@GavinClarkdiy you're welcome sir gavin
Been fabricating all my life. Pipe welder. Fabrication. Tig ect. Had a bueatyful shop. Wish I knew these things back when. Very nice work. Makes me want to get my equipment back!!
I love making these things, I am sure I would miss it if I could not do it, I wish you the best Wade.
Love your work and thank you for showing the measurements
Thank you very much, I am happy that you liked it.
Hi Gavin, think your channel is brilliant. Only started welding 6 months ago, it was something I’d always wanted to do so I bought the kit and started teaching myself in the garage. Im subscribed and watch your channel every time you post a new video. Really inspiring with so many ideas and projects to try. Keep it up mate👍
Thank you very much, I am glad you like my work. I wish you the best for your projects.
I told you before. I'm 70 years old and if I ever grow up I want to be just like you. You are my role model so be safe.
I will do my best to be safe, you do the same too, wishing you the best mate, keep safe.
Pretty cool I like it
Thank you very much.
Thank you
Thank you very much, I am happy that you liked it.
That's a lot of work sir but worth it. That beautiful n entertainment for the viewers. Tks
Glad you enjoyed it, thank you very much.
Excellent video Gavin
Thank you very much, I am glad you liked it.
This one is great Gavin. It reminds me of H R Geiger's designs from the Alien film trilogy love it, ✌❤ Bob.
Thank you very much Bob, I like all those busy looking fittings, I will have to have a look at Alien again it has been a long time, I might get some ideas. Thank you for your comment Bob, keep safe.
willllllll done. big like for you
Thank you very much, I am glad you liked it.
Good 👍👍👍
Thank you very much.
Very cool. Glad I found this channel
Thank you very much, I appreciate your comment.
Solid and beautiful…good looking shelf bracket!!!… metal Smith master!
Thank you very much, I am glad you liked it.
Good job 👍
Thank you very much.
Молодец!!!
Красота 😻😻😻
Продолжай удивлять народ!!!
Большое спасибо, я рада, что вам понравилось.
You are the master of the industrial style corbel. Keep them coming.
Thank you very much, I am glad you liked it.
Bravo..good job
Thank you very much.
Very good,,,,,,👍👏👏👏
Thank you very much.
👍👏👏😉😃😁
You Sir are a Metal Art Picasso.
Thank you very much, I am glad you like my work.
Good👍👍👍
Thank you very much.
even though I have a similar profession, you are like a teacher to me. I greet you
Thank you very much, I appreciate your comment.
Good stuff matey.
Thank you very much, I am glad you liked it mate.
Nice one Gavin🇿🇦
Thank you very much.
Absolutely love it 👍
Thank you very much, I appreciate your comment.
Very nice
Thank you very much.
Very good! , Brazil!
Thank you very much, Greetings from Australia.
Genioooooooo !!!! Desde Argentina.
Muchas gracias, Saludos desde Australia.
That one is really good thinking outside the box
Thank you very much, I am glad you liked it.
Nice work I like 👍
Thank you very much, I am glad you liked it.
Bravo...from Tunisia
Thank you very much, I am happy that you liked it. Greetings from Australia.
very nice 👍
Thank you very much, I am glad you liked it.
Inspirational ! Love your work
Thank you so much!
Sr usted es una persona bien hecha, hace bien su trabajo, traza bien, hace bien sus dobleses, corta bien y tiene el tiempo y paciencia para hacer su trabajo, es usted un genio, un abrazo y muchas felicidades, le agradezco por sus bonitos vídeos, aprendo mucho siga adelante, saludos desde Puebla México.
Muchas gracias, agradezco tu comentario. Saludos desde Australia.
Comparto todo lo que decís!!! Saludos desde Montevideo - Uruguay!!!
I see your work that is more and more creative and watch this video make me grow up a lot.thank for your sharing!!
Thank you very much, I am glad you liked it.
Ideias simples, porém geniais! Lindas peças
Muito obrigado, fico feliz que tenha gostado.
Oh wow MR Gavin. That is a beautiful piece of work
Thank you very much, I am glad you liked it.
Wow so amazing!
Thank you very much, I am happy that you liked it.
@@GavinClarkdiy you're very talented , I'm inspired to try one of your designs so cool.
@@allysonpeacock3850 Thank you very much, I wish you the best for your project.
My favorite shelf bracket so far. Cutting the turnbuckle in half and rewelding made it perfect, good call. Another great industrial design Gavin, can't wait to see what you come up with next.
Thank you very much, I appreciate your comment.
Off course fraind let's see congratulations
Nicely done! I love your projects!
Thank you very much, I appreciate your comment.
Thank you for the video, as always, the idea is great, the execution is masterful!
Thank you very much, I appreciate your comment.
Absolutely love it
Thank you very much, I am glad you liked it.
Thanks for the ideas Gavin , make great usable things with simple means...... Works of art, with much attention to detail
Thank you very much, I am glad you liked it.
Hi Gavin, absolutely perfect, thank you for sharing, greetings from Germany
Thank you very much, I am happy that you liked it. Greetings from Australia.
Good 👍
Thank you! Cheers!
Excelente proyecto. Muy bien logrado!!!
Muchas gracias, me alegro que les haya gustado.
Love it keep up the great ideas for scrap metal uses
Thank you very much, I am glad you liked it.
Felicitaciones!!!! Muy bueno. Abrazo grande!!!!
Muchas gracias, estoy feliz de que te haya gustado.
Well done! What an imagination you have!
Thank you very much, I appreciate your comment.
Nice one! Thank you for your time.
Thank you very much, I am glad you liked it.
Another great innovation
Thank you very much, I am glad you liked it.
¡excelente trabajo de herrería .felicidades ! SALUDOS DESDE MEXICO CAPITAL.
Muchas gracias, estoy feliz de que te haya gustado. Saludos desde Australia.
That's awesome. Your ideas for these things is next level.
Thank you very much, I appreciate your comment.
Perfect!Good job!Изящная вещь!
Thank you very much, I am happy that you liked it.
На мой взгляд красиво, но очень трудозатратно.
Brilliant!!
Thank you very much.
Nice bracket sir.. 🤩🤩🤩
Thank you very much, I am glad you liked it.
Another outstanding job Gavin, I’m going on the hunt for reo around the building sites now
Thank you very much, I wish you the best for your future projects.
Great ideas and quality work as always!
Thank you very much, I am glad you liked it.
Great work again Gavin, love what you do. Hello from England. Stay safe mate, Norm.
Thank you very much Norm, I am happy that you liked it. Greetings from Australia. Keep safe mate.
I found your videos recently & am enjoying watching what you turn out. Love your work.
Thank you very much Robyn, I am glad you liked it.
@@GavinClarkdiy do you give lessons, lol
I need to learn how to use my new mig welder. 😁
@@robynmiles6344 No I am sorry Robyn, I do not do that. Thank you
Cuanto arte!!! Abrazo!
Muchas gracias, estoy feliz de que te haya gustado.
genio !!! saludos desde aquí, Argentina...
Muchas gracias, estoy feliz de que te haya gustado. Saludos desde Australia.
Total Art. Well done
Thank you very much, I am glad you liked it.
Great work my friend. Hope you're selling them and making good $. You deserve it. Can't wait til next vid.
Thank you very much, I appreciate your comment.
Nice work! Always something unique!
Thank you very much, I appreciate your comment.
I’ve learned so much from you sir, thank you 🙏
Thank you very much, I appreciate your comment.
Show... Muito interessante.em qualquer móvel que instalar essa peça fica top...👏🏽👏🏽
Muito obrigado, agradeço seu comentário.
*You are a master of perfection!*
There is no one who can do this craft better!
Before I forget, I bought 2 of the flexible magnets! PERFECT!!
Thank you very much, I appreciate your comment. I am sure you will love the magnets, Did you happen to buy them from the link in this video description? not a problem either way, I am just interested. Keep safe.
@@GavinClarkdiy I would have loved to order the magnets via your link, unfortunately my delivery address is in Germany.
@@DerMoelly All good, no problem, I was just wondering how the link worked for you. Keep safe.
Looks very nice. Though turnbuckle remains streched but, here it looks in compression. You have made intresting contrast - creative.
Thank you very much, I am glad you liked it.
Cómo siempre, good job Gavín. Saludos.
Muchas gracias, Saludos desde Australia.
Шикарная вещь!!! Очень интересно смотреть!!
Большое спасибо, я рада, что вам понравилось.
Nice work and lovely finished 👍
Thank you very much, I am glad you liked it.
@@GavinClarkdiy you very much welcome 🙏 I really appreciate it good artist work 👍
Thank you.
Niceeee - Keep them coming! Many thanks for sharing!
Thank you very much, I am glad you liked it.
Congratulations wonderful work, saude, Rio de Janeiro, Brasil.
Thank you very much, I am happy that you liked it. Greetings from Australia.
Excelente trabajo!
Muchas gracias, estoy feliz de que te haya gustado.
Magnífico 👏👏👏
Muchas gracias, me alegra que te haya gustado.
Another fantastic video. You are a true Engineering artist.
Thank you very much, I appreciate your comment.
Mate that's excellent. So cool.
Thank you very much, I am glad you liked it.