🛠Charlie DIYte Amazon Tool Store amzn.to/3fcLnY4 - all my tried, tested and much loved DIY tools. You can help support me by Buying me a Coffee ☕ bit.ly/3xuQ3zb or by becoming a Member to unlock a host of benefits - thanks so much 🙏.
You're very welcome. Thanks for the comment. It pays to clean these out reasonably regularly. I did this one again a couple of months ago and it was properly disgusting 😉
Great video. Helped me kill an hour today during the lockdown haha. Mine was completely full of slime it had started to work its way down the deeper piping, glad I saw this and stopped it in time.
You're welcome. Yes, I did mine again recently, had exactly the same problem. Satisfying when it's done though, and the bowl empties quick as a flash 👍
That’s it Charlie, clean it with one hand and a bacon sarnie in the other if it were me! Haha. I do this daily where I work. Always messing about with other people’s kitchens and bathrooms. I’ve seen a LOT worse trust me! Loving the cabinet basin unit though! Really effective. I’ve also found the pop up wastes to gather more crap quicker. Regardless of the type of trap used. I’ll admit I’ve got one myself as they look nicer but I clean mine out a lot more often than I’d like to! Cheers mate! Take it easy.
Cheers Marc - good to hear from you. TOTALLY agree with you about the pop up waste - I've suspected that for a while! Yep, never wear gloves, me, but I keep remembering my video responsibilities when it's too late!!
You're welcome. Satisfying when you empty the first sink afterwards and it zooms down! I need to do mine again. I keep putting it off - too many videos to edit😬
Thanks for the video. We have a blocked bathroom sink, on a pedestal, with just a simple U-Bend connection underneath. The water does not drain at all. Because of the pedestal its tricky to get to unscrew the connections. None the less I have unconnected everything, cleaned and put back together. However, the water is still just not draining. The outlet pipe for the waste goes into a plasterboard wall. To my mind, there must be an issue with the pipe going into the wall, or beyond. Or have I missed anything. Any further advice would be appreciated.
Having an issue with a bottle trap exactly like this, cleared it out but the sink is still backing up, water will not go past the trap, any ideas? I am at a loss?
I had this exact issue, couldn’t believe that amount of gunk! My problem now is that the top washer has perished so I’m getting a leak after reassembly. How do I know what size replacement washer to get, they seem to be 32 or 40mm but nothin seems to match those measurements exactly?
Neat plumbing job, if it bugs you that much, why don’t you cut the pipe and fit a straight joiner below the Y junction. My lad has a hair salon and I regularly have to clean the basin wastes from underneath and as you’ve demonstrated pliers are a must. Like the basin unit 👍🏻 Thanks for posting.
the pipe from our sink goes down to the floorboard and then seems to take a 90 or 45 degree bend - under the floorboard - and this seems to be just where the blockage is on mine lol. I can take the p trap apart easy but the 75cm or so of vertical pipe is solvent welded after that onto that bend. Seems I'm screwed unless I can lift that floorboard somehow.
Glad to hear it Tracy. It's crucial to do this every 6 months or so. I cleaned all mine again the other day and they were DISGUSTING. Thanks for getting in touch 👍
I’ve tried a plunger, mr muscle, and even bought a tool from Amazon for unblocking drains none have worked, unfortunately I can’t even get the tool from Amazon down the pipe very far, how can I do this when I don’t have open space round the pipes like this video? The sink doesn’t just drain slow it doesn’t drain at all
I've never heard of a trap having a ball in it as it's the water that creates the seal to prevent smells. Are you sure it didn't fall in there somehow?
@@CharlieDIYte Thanks. Yeah, no idea how it would of got in there though. It's in the bin now anyway. No harm, no foul. Glad it's not needed. Thanks again :)
This is why a p-trap should be used wherever possible... p-traps rarely block....bottle traps should only be used if you can't fit a p-trap... I would have changed that bottle trap to a p-trap, because you have the space...think of a bottle trap as a compromise for a p-trap...
When I have been doing similar jobs (and much worse) people have said 'you should wear gloves' - I say listen - 'It may be shit to you - but it is bread and butter to me'. Thanks Charlie ;-) BTW it does show the trap has no real role in keeping the pipework downstream clean - which is kind of disappointing.
Ha - love it! Thanks Norman. I agree, and I had another comment from a plumber useful who said the push operation plugs, nice though they look, do seem to gunk up more than standard ones.
Charlie DIYte I think he is absolutely right - I only have one out of three bathrooms fitted with those plugs and it is the one that causes most bother.
How is it that the push plug is removed. I’m struggling to remove mine. There isn’t a link rod behind the pedestal sink. Also, I have a pedestal trap rather than a bottle trap. Is the principle the same ?
Yep there's a definite correlation between the sink I use for shaving and all the gunk that builds up, compared to the one next to it my other half uses.
Just tried to do it for the first time, it smells way worse than it looks, and I couldn't even fully unblock it... I guess I'll be using chemicals from now on.
Yep - I'm completely flummoxed as to how all that hair could have got in the sink!! I should have got rid of that before cleaning out the waste pipe - I nearly didn't post the video because I thought everyone would find it too gross!
Slow draining bathroom sink solved. Job done. Great easy to follow video, thanks
🛠Charlie DIYte Amazon Tool Store amzn.to/3fcLnY4 - all my tried, tested and much loved DIY tools. You can help support me by Buying me a Coffee ☕ bit.ly/3xuQ3zb or by becoming a Member to unlock a host of benefits - thanks so much 🙏.
Worked for me, so thank you
Really helpful, easy to follow and down to earth - many thanks
You're very welcome. Thanks for the comment. It pays to clean these out reasonably regularly. I did this one again a couple of months ago and it was properly disgusting 😉
Great video. Helped me kill an hour today during the lockdown haha. Mine was completely full of slime it had started to work its way down the deeper piping, glad I saw this and stopped it in time.
You're welcome. Yes, I did mine again recently, had exactly the same problem. Satisfying when it's done though, and the bowl empties quick as a flash 👍
Nice quick video this.
Thank you very much! It worked!!
great video, thanks - just did mine with my *bare* hands initially, then er decided old j-cloth!
Just what I needed to know . Thanks 🙏
You're welcome 👍🏻
Brilliant as always
Cheers mate - really appreciate that!
So helpful, thank you 🤗
You're very welcome Mimi 👍🏻
Got to do ours tomorrow Charlie, HATE IT the last time I did it was from the bath really did pen & ink !!!
Any thoughts about descaling bathroom sink waste pipe ? Hard water area (Lincolnshire)
Great video, job done. Thank you 😊
Glad you found it useful. Thanks for letting me know.
That’s it Charlie, clean it with one hand and a bacon sarnie in the other if it were me! Haha. I do this daily where I work. Always messing about with other people’s kitchens and bathrooms. I’ve seen a LOT worse trust me! Loving the cabinet basin unit though! Really effective. I’ve also found the pop up wastes to gather more crap quicker. Regardless of the type of trap used. I’ll admit I’ve got one myself as they look nicer but I clean mine out a lot more often than I’d like to! Cheers mate! Take it easy.
Cheers Marc - good to hear from you. TOTALLY agree with you about the pop up waste - I've suspected that for a while! Yep, never wear gloves, me, but I keep remembering my video responsibilities when it's too late!!
Thank you. This is the business.
Really appreciate this video. Helped me a lot!
You're welcome. Satisfying when you empty the first sink afterwards and it zooms down! I need to do mine again. I keep putting it off - too many videos to edit😬
@@CharlieDIYte indeed it is satisfying! Even more so when your wife recognises you finally as a true man
Thanks for the video. We have a blocked bathroom sink, on a pedestal, with just a simple U-Bend connection underneath. The water does not drain at all. Because of the pedestal its tricky to get to unscrew the connections. None the less I have unconnected everything, cleaned and put back together. However, the water is still just not draining. The outlet pipe for the waste goes into a plasterboard wall. To my mind, there must be an issue with the pipe going into the wall, or beyond. Or have I missed anything. Any further advice would be appreciated.
Having an issue with a bottle trap exactly like this, cleared it out but the sink is still backing up, water will not go past the trap, any ideas? I am at a loss?
Was helpful thanks
Thanks 👊
I've got a straight pedestal trap. How do you clear that?
I had this exact issue, couldn’t believe that amount of gunk! My problem now is that the top washer has perished so I’m getting a leak after reassembly. How do I know what size replacement washer to get, they seem to be 32 or 40mm but nothin seems to match those measurements exactly?
Neat plumbing job, if it bugs you that much, why don’t you cut the pipe and fit a straight joiner below the Y junction. My lad has a hair salon and I regularly have to clean the basin wastes from underneath and as you’ve demonstrated pliers are a must. Like the basin unit 👍🏻 Thanks for posting.
the pipe from our sink goes down to the floorboard and then seems to take a 90 or 45 degree bend - under the floorboard - and this seems to be just where the blockage is on mine lol. I can take the p trap apart easy but the 75cm or so of vertical pipe is solvent welded after that onto that bend. Seems I'm screwed unless I can lift that floorboard somehow.
A baby bottle steril brush could be really useful for cleaning in between the hard to reach area.
Thank you, helped me in a crisis today
Glad to hear it Tracy. It's crucial to do this every 6 months or so. I cleaned all mine again the other day and they were DISGUSTING. Thanks for getting in touch 👍
Charlie DIYte oh no don’t say that!! I thought it was a one off, thanks for the advice and video 😊
What about the gurgling noise? How do you get rid of that?
Yes.. you reminded me, I need to give mine a clean :(
Yep - it's one of those horrible jobs you know needs doing but never get round to!!
I’ve tried a plunger, mr muscle, and even bought a tool from Amazon for unblocking drains none have worked, unfortunately I can’t even get the tool from Amazon down the pipe very far, how can I do this when I don’t have open space round the pipes like this video? The sink doesn’t just drain slow it doesn’t drain at all
Hey... mine's doesnt seem to get blocked by anything but somehow the water in the sink wont go in
Mines behind the sink plinth and pipes either side 😖. Is hand tight ok?
Yes they're only meant to be hand tight
@@CharlieDIYte thanks 👍
A red ball fell out of my bottle trap. I binned it. A ball washer? Is it needed?
I've never heard of a trap having a ball in it as it's the water that creates the seal to prevent smells. Are you sure it didn't fall in there somehow?
@@CharlieDIYte Thanks. Yeah, no idea how it would of got in there though. It's in the bin now anyway. No harm, no foul. Glad it's not needed. Thanks again :)
This is why a p-trap should be used wherever possible... p-traps rarely block....bottle traps should only be used if you can't fit a p-trap... I would have changed that bottle trap to a p-trap, because you have the space...think of a bottle trap as a compromise for a p-trap...
Aman A Good point!
When I have been doing similar jobs (and much worse) people have said 'you should wear gloves' - I say listen - 'It may be shit to you - but it is bread and butter to me'. Thanks Charlie ;-) BTW it does show the trap has no real role in keeping the pipework downstream clean - which is kind of disappointing.
Ha - love it! Thanks Norman. I agree, and I had another comment from a plumber useful who said the push operation plugs, nice though they look, do seem to gunk up more than standard ones.
Charlie DIYte I think he is absolutely right - I only have one out of three bathrooms fitted with those plugs and it is the one that causes most bother.
How is it that the push plug is removed. I’m struggling to remove mine. There isn’t a link rod behind the pedestal sink. Also, I have a pedestal trap rather than a bottle trap. Is the principle the same ?
My plug unscrews. Yes the principal should be the same with the pedestal trap, albeit more fiddly to get to and remove.
Thanks a lot ... I cleaned my six month's beard trim. It was pure ASMR. My mouth watered as I pulled the scum out of it.
Yep there's a definite correlation between the sink I use for shaving and all the gunk that builds up, compared to the one next to it my other half uses.
Just tried to do it for the first time, it smells way worse than it looks, and I couldn't even fully unblock it... I guess I'll be using chemicals from now on.
Guess what am I doing this afternoon.
Ha! Good luck!
I think the faster draining sink is the one your wife uses??
Ha! We've been having arguments about that. It's the sink I use most often but she swears blind it's the sink she's been using :)
Tip-dont shave legs in the sink!😁😁😁😁👌👌👌👌👌
Yep - I'm completely flummoxed as to how all that hair could have got in the sink!! I should have got rid of that before cleaning out the waste pipe - I nearly didn't post the video because I thought everyone would find it too gross!
It's a gross job lol i don't see why anyone's complaining
Thanks Vince 👍😉
What’s the point of having gloves if you’re not going to use them.
Did I not? 🤦
how not to unblock a sink
Sigh. Another disgruntled trade. I'm not threatening your livelihood. D'you really want people getting you out to clean their drains?
is he gouging the gullible?