Guys..i teamed up with a few other youtubers for a huge giveaway of 2018 "3" flagship smartphones going worldwide. Check it out: czcams.com/video/pW0tzjejtP0/video.html
Yeah, thank you for it. I found a rusty Baron and I’m trying to clean it up and I didn’t want this stuff to disintegrate the plastic so I had to take it apart
This is useful even if someone doesn't have a fidget spinner. You can do this with basically any bearings! Great work as usual dude, keep up the great work!
Bro I can't not thank you enough like I have a fidget spinner but with like the really small bearing like really f***** small. I just tried all night and no reaults. I just qoke up and watched this video and I got it thanks you so much
+Nick Skates No prob! Hey if u can plz sub. And if u are interested in tons of weekly giveaways stay active on channel and comment the country you live in here: czcams.com/video/N4gwj0CtPwE/video.html
Very helpful video....great work....but i am having a ball bearing with really small balls and i am facing difficulty in doing that.... Pls help.... I really appreciate you effort I hope you will help me out of this... Thank you very much...
+Charlex Alexandre No prob! Hey if u can plz sub. And if u are interested in tons of weekly giveaways stay active on channel and comment the country you live in here: czcams.com/video/N4gwj0CtPwE/video.html
6 hours later and I just ended up losing some of the balls. They exploded and went everywhere. This trick is impossible. Now I have to spend 20 bucks on a new bearing...
Very interesting ... I never knew you can take the individual bearings out ... I have a question ... Can you take the bearings from any of the arms and use it as the center bearing ?
Thnks broo you save my money because i open fully fidget spineer and its really too hard for me to joined ones again but before i watch your video and finally i done thnks thanks bro love you keep it up
Thanks for the info and very helpful and great video too awesome!! Getting the bearings working properly is very important thank you! I approve of you're videos thanks!👍👍👍
Ughhhhhh my FIDGET spinner just fel and one of the bearring is point out and i have like really weird bearrings and it just WONT work to push it in our out
you have a solution for all my problems, isn't it haha, I have struggled a long time how to get it back together. this might help a lot. Thnx from the Netherlands
Hi, Can You Plz Help me ? My Bearing Isn't Working At All !! before It The Spin Time Was 3:22 Min and Now It Is 2 Sec Literally Its 2 Freaking Second !
Got the balls back in the spinner with only one flaw, I lost 1 ball during cleaning. It jumped of the table, didnt find it anywhere. Still works with missing a ball.
+Diana here my tool kit: czcams.com/video/IRnIdhkWkpE/video.html. I could prob contact them and so another review and have them a send some to my subscribers too 😁
This was a smart video, because people will rewatch it in the future to do it again. Your job is cool. I am trying to get to your level. This week I am only giving away one spinner. Hopefully I can afford more next week.
Thank you so much I got my spinner today and the balls just fell out this was the only thing that worked and my parents probably wouldn't have let me get another one thank you I subbed 👍🏽👍🏽👍🏽👍🏽👍🏽😃😃😃😃😃😃😃😃😃🤗🤗🤗🤗🤗🤗🤗🤗🤗
+Brayden Ketron it took my like 3 days to figure it out. Once u get it once then bam... the light bulb comes on. U need to press the inner ring further down on the towel and move it left and right until all the balls are in the middle grove. Keep trying.
i dont understand why the **** it is not staying in place.. i have been so pissed of this.. after seeing this video i removed my bearing and it didt work out.. PLSSS HELP!!!!!
Guys..i teamed up with a few other youtubers for a huge giveaway of 2018 "3" flagship smartphones going worldwide. Check it out: czcams.com/video/pW0tzjejtP0/video.html
Hay
Yo this is cool it helped me
Hey
I subscribe to your channel by the way, I couldn't say it on each videos because some of them were made for kids.
Yeah, thank you for it. I found a rusty Baron and I’m trying to clean it up and I didn’t want this stuff to disintegrate the plastic so I had to take it apart
This is useful even if someone doesn't have a fidget spinner. You can do this with basically any bearings! Great work as usual dude, keep up the great work!
Crims0n-Vectors just what I was going to say
The tip about putting the inner part horizontal and then turning it vertical was amazing, thank you.
Bro I can't not thank you enough like I have a fidget spinner but with like the really small bearing like really f***** small. I just tried all night and no reaults. I just qoke up and watched this video and I got it thanks you so much
+Nick Skates No prob! Hey if u can plz sub. And if u are interested in tons of weekly giveaways stay active on channel and comment the country you live in here: czcams.com/video/N4gwj0CtPwE/video.html
Yeah. Well I tried to put back the caps but the were glue together and I need help putting it back
ty,my brother can finally stop crying about him breaking the spinner bearing apart.
Lmfao
Jesus Christ lol
Me too 😭👍👍❤️
Very helpful video....great work....but i am having a ball bearing with really small balls and i am facing difficulty in doing that....
Pls help....
I really appreciate you effort
I hope you will help me out of this...
Thank you very much...
Ayush Pandey fyjxrj
I just tried this, using a sponge as a surface works really well.
OMG thank you i spent forever trying to put it back together !!
+Charlex Alexandre No prob! Hey if u can plz sub. And if u are interested in tons of weekly giveaways stay active on channel and comment the country you live in here: czcams.com/video/N4gwj0CtPwE/video.html
Charlex Alexandre same
Tbh this is the first time I want to fix something and I press on a video(the first video I choose)and the steps really work!!!!sooooo happy
Manar Shaikhli ايز
:ف
Another fantastic video! What do you think spins better and longer? A fidget spinner with the bearing retainer or a fidget spinner without.
+Joseph Tuckerman well u need some kind of retainer or cage so the balls stay evenly spread.
I been trying for over 1 Hour. So thank you 🤗😁
I didn't try it till now but I want u ask u guys that does it really work
I always wondered how to take them out and put them back in. Thank you for showing us!👍
6 hours later and I just ended up losing some of the balls. They exploded and went everywhere. This trick is impossible. Now I have to spend 20 bucks on a new bearing...
You have to put it in a flat surface and make sure all the balls are together otherwise you are going to lose them
You idiot
You have no idea how much of a save this is!!! Thanks bro
Very interesting ... I never knew you can take the individual bearings out ... I have a question ... Can you take the bearings from any of the arms and use it as the center bearing ?
+Fred Pal yes u can use it as a center bearing too!!!
You can use the shield to hold the balls on the outer race and you can just slide in the inner race with some care I hope this helps
This is the first time I watch this CZcams channels video...I'm subscribing!
+Manar Shaikhli thx bro!! I have tons and tons of spinner giveaways too. Just stay active on channel.
I had the same problem, didn't want to deal with tape though I put some spark plug grease on the bearing, and now it's working better then before lol
What else could u use to clean it apart from rubbing alcohol??
What is the diametre of that bearing sir
Thnks broo you save my money because i open fully fidget spineer and its really too hard for me to joined ones again but before i watch your video and finally i done thnks thanks bro love you keep it up
Thanks for the info and very helpful and great video too awesome!! Getting the bearings working properly is very important thank you! I approve of you're videos thanks!👍👍👍
MANY THANKS
this video helped me to re assembly the bearing again after many useless tries
+Ahmed Fawzy 👍🏻👊🏼
Ughhhhhh my FIDGET spinner just fel and one of the bearring is point out and i have like really weird bearrings and it just WONT work to push it in our out
Thanks alot man, after going through more than 10 videos, this is the only video that works.
+JoNathan Jr. 🙏🏼👍🏻👍🏻👊🏼
iLuvTrading. How much does those fidget which have all bearing on each one cost?
What product is it?
does this clean actually make the spin time increase because you should do a video comparing the clean one and the old one
+Stiffcross tech hey I'm actually about to do a a vid on this!!!
cool man, and is this u or ur manager? just want to know
Thank you very much because of your video I can play with my fidget spinner again
5 years later i still use this video lol
Why I cannot put it back in?
you have a solution for all my problems, isn't it haha, I have struggled a long time how to get it back together. this might help a lot. Thnx from the Netherlands
can we use oil in place of rubbing alchohol??
Thanks, i'm changing fidget spinner parts and i needed to know how to take it apart
What if the ball bearings came out and the outside peice that keeps them togehter, how do we get it out so I can put all if back together :/
thannxx man.. u r a life savier of fidget spinner,😂😝
For my fidget spinner the only things that come out are the middle and the bearings idk what To do
Can you try with the small metal fidget spinner
please tell another way because when i roll the fidget's bearing it is is not fixing balls pleaaaaaase tell me my fidget is not fixin😟😟😟
how were we gonna repair the ball bearing fixed to the fidget spinner😫😥. Please tell me
Hi, Can You Plz Help me ? My Bearing Isn't Working At All !!
before It The Spin Time Was 3:22 Min and Now It Is 2 Sec Literally Its 2 Freaking Second !
Got the balls back in the spinner with only one flaw, I lost 1 ball during cleaning. It jumped of the table, didnt find it anywhere. Still works with missing a ball.
Need to to get a handy tool like yours. Where did you get your tool from? 😊
+Diana here my tool kit: czcams.com/video/IRnIdhkWkpE/video.html. I could prob contact them and so another review and have them a send some to my subscribers too 😁
I have the lighting spinner and the bearing is not getting of what I have to do
Sir, what happens if the balls in my ball bearings are too large?
I love you mine wasent working so I opened it and didn't now how to fix it bit your video was the only one that worked and I subbed
This was a smart video, because people will rewatch it in the future to do it again. Your job is cool. I am trying to get to your level. This week I am only giving away one spinner. Hopefully I can afford more next week.
Thank you so much I got my spinner today and the balls just fell out this was the only thing that worked and my parents probably wouldn't have let me get another one thank you I subbed 👍🏽👍🏽👍🏽👍🏽👍🏽😃😃😃😃😃😃😃😃😃🤗🤗🤗🤗🤗🤗🤗🤗🤗
Maddie the gymnast iii
Maddie the gymnast i
it doesn't work
Maddie the gymnast y
Everything's Here yes it does
It's awesome how they made this fun toys😁. awesome vid
Aye can u help me it’s not working the balls pop of everytime
Flakegamer& Vlogs same thing happened to me, but it worked
u r a legend 🌟🌟🌟🌟🌟
The thin u put in the balls not the brown thing but its stuck on the pad
Very well done . Good demo.
That is really cool on how a fidget spinner can come apart
can i use something others than rubbing alchohol? if so what?
dude ..its works but only 6 ball are ablr to insert by me..i tried again and again but 1 ball alwys remians out :(
It not working a ball is poping out and not fuxing plz help me throughit
How do u take out the midle if it stuck
ugh... can't get it, but i'll keep trying! This is the most helpful video so far!
+Sarah Ricotta remember that U need to get the balls in the center grove of the ring.
My fidget spinner balls fell out and I couldn't find them anywhere. Is there any other way I can replace them? I only have 4 balls left. Please help.
+Draquetta Malfoy just buy a new bearing u can get them for like $1 on Ebay now
Omg thanks the little balls fell out of my bearings about a year ago. Im glad I kept all the parts. 👍
Awesome!! Hey if u don’t mind plz sub/ watch my other vids 🙏👍: czcams.com/video/N5onjbdR9to/video.html
Sure I'll sub you fixed 7 of my fidget spinners
You got a fidget stick in one of your videos 17 hours ago you just can rotate it in the middle on search fon it
what if the retainer is on both sides...
Man i cant seem to make it work, mines a ceramic bearing
I try very times but balls are not going in my spiner
The entire middle came out of mine the balls and the small inside thing but.. The thing holding them all together is stuck inside the fidget spinner
THANK YOU! I finally got the bearings back in!😁
What happens if you put soap on fidget spinners
Ashwin
You cant bring it to prison. Ba dum pshhh! No? Okay, I'll go. 😔
i don't get it. i have been trying this for an hour and no results. how am i doing this wrong
thanks
I have both spinner same
When I circle it bearing go up
how many times did he say balls!! (Great video by the way it really helps!)
what if one or more ball are
less
he have 7 ball😱😱😱😲😲
if the ball not complete how do i fix that
My spinner broke the little inside thingys on the sides they popped out and now they fall out when I spin them :( Any help please
How did he make the fidget spinner spin fast but it looks like it's not moving much
+Ashton Holland it's the camera
I couldn’t get it to work. I tried like 20 times and still couldn’t get it to work. What am I doing wrong?
Tried 100 of times but not worked 😕
your tutorial is the only one that worked thank you
+Smashie Studios Lps sweet! Hey plz sub if u for mind. I have tons and tons of weekly giveaways too.
actually my spinner is broken.. the bearing ball was out.. I am very sad.. that's is my first spinner... but this video is very helping... tq
my digit didn't work then a little clean and now it works
I used vodka, and my fellow Russian comrads stole my spinner.
Thank you so much for saving my life, love, world and everything
What's the model you've got with longuest spin time ?
+Marco P hmm... it's the 120g brass spinner so far. But I have others coming in that claim longerZ we will see.
THANK YOU
Tried this but the bearing wont come off
please tell me the centre bearing size
When I pick the ring with the little balls and everything in it, the balls just fall out. Someone help me please
ty bro yur trick helped me a lot 8t went frm 25 seconds to 1 min 45 seconds thanls dude
Thanks dude my spinner great now.
thx it helped me put the balls back u got urself a new subscriber
+Mitr Nanda 🙏🏼🙏🏼
hey
can any1 tell me how can i join my cap of my metal fidget spinner it is not joining and it is going to be black colour
Respond ASAP Every time I go to put the little circle in none of the balls stick to it please help
+Brayden Ketron it took my like 3 days to figure it out. Once u get it once then bam... the light bulb comes on. U need to press the inner ring further down on the towel and move it left and right until all the balls are in the middle grove. Keep trying.
I cant put the bearings in
Thank you so much I was playing with my sister's one and I broke it but I just fixed it thank you so much
Do you think vodka would work as well?
I lost ball...
Of spinner help
i dont understand why the **** it is not staying in place.. i have been so pissed of this.. after seeing this video i removed my bearing and it didt work out.. PLSSS HELP!!!!!
I lost one ball what should I do please