Rotate MD-80 Cold/Dark Startup Tutorial (XP11)

A short and basic tutorial on how to startup the Rotate MD-80 in XP11.
A really well done and excellent airplane to have in your hangar.
Available Here: store.x-plane.org/Rotate-MD-8...
Timestamps
0:00 - Intro
0:50 - APU Start/ Learning the basics
5:40 - Configuring the FMC (IRS Alignment)
7:40 - Fuel, Weight, and Trim
12:07 - Prep for Engine Start
16:25 - After Engine Start
19:12 - Setting Hydraulics
19:48 - Ending Notes

[@williesturner9398]

You did A very fine job explaining how to start the MD-80

[@mohsenhosseini2604]

thank you , thank you

[@Maritime_Pilot1973]

This tutorial was brilliant! Keep up the good work!

[@arcticpilotshow4440]

Very good tutorial, thank you.

[@Alebox19]

Thank you

[@theaviatorschannel4960]

-Please note, if your CG is listed as red in the booklet, this means that your total center of gravity is off. You must balance the aircraft accordingly, play around with the numbers until your CG number turns back to grey.

[@gianpierouccelletti1487]

Very good! Hey it would be very nice if you do a tutorial of the FMC of this MD 80 of Rotate I never get to understand it

[@youbika]

Hello, when I fly Rotativo MD80 I am cruising at 30,000 feet an alarm goes off then the airplane cabin begins to get dark until it gets completely black?Can you help me why is this problem happening?

[@theaviatorschannel4960]

Something is wrong with your pressurization in the aircraft. Make sure that your left and right air conditioning packs are ON.
Maybe you forgot to flip them back to ON after engine start. If you want to, you can just turn off the realistic blackouts in settings. But of course the main point of a simulation is for the realistic feel. It's up to you. If you need to, defer back to the tutorial for any needed clarifications. If you are new to the aircraft it's possible that you might've missed something. At timestamp 16:20 I set the air conditioning pressurization packs after engine start.
-Let me know if you have any more questions!