C16 on stage6 Pro sport.. gives only a good top speed , your starting speed is getting rally bad , but Yasuni R will bring life to your Pro sport, this setup I write here will give you a cool Aerox to run on. Trust me. Cylinder: stage6 sport pro MK1 Exhaust: Yasuni R carburetor: 21mm Membrane: malossi VL12 Studs: original gummy studs Power filter: your choice Vario: stage6 pro sport. Blower: stage6 racing CNC driving fan V-belt: Polini Kevler Pulley. Top performance 36˚ Clutch. stage6 Racing Torque control MK2 Clutch bell. Stage6 433gr Ignition: R-setup shims: 2 slices (between vario and racing Fan) Variety rolls: 3.5gr or 4gr Trim Spring. stage6 Hard Pressure spring. stage6 Medium head nozzle: between 98 - 102 Idle nozzle: 42
Do you think for a Stage 6 Racing mk2 a Yasuni C16 City would be better than a Yasuni R? I'm thinking of buying a Yasuni C16 City And another Question, is the Yasuni C16 City louder than the Stage 6 Pro Replica?
@@LegionarHR Hey, I currently have a Sito Plus for daily street use and a C21 for the track. Really fun to ride around the city with a quiet racing scooter.
For stage 6 racing mk2 i would suggest c16, stage 6 r1200 etc. For stage 6 sport pro mk2 i would suggest yasuni r or gianelli shot. Maybe polini4race will also run nice. But only for minarelli though! Yasuni c16 on piaggio sucks bigtime
your delusional im driving mine with a c20 and it fucking rips yasuni r is only for basic 70ccs with sport pro mk2 u can get up to 17 hp but not with yasuni r....
@@TheWalkingPotato1 le truc c'est qu'il faut pas le démarrer et tirer dedans à fond directement, tu le laisses par exemple 2 minutes et tu pars pas à fond directement
valla patata xD,muerta en salida esta mal tocada de transmision no tiene buenos pesos de rodillos i el cilindro stage 6 sport de hierro seguro que no esta limando i preparado por eso no hace nada la aerox
nice performance
Why it gave me nostalgia when scooters were so cool😢
looks good men!
That cilinder was so cold and doesn't run like the cilinder with a good temperature
cilinder
cilinder
cilinder
cilinder
cilinder
lethal
What the carb setup
5 cv aerox??
is that a 2004? i have the same scooter with same color
Crazy! Anyone watching this masterpiece in 2023?
slow scooter tho
Yea
lmao dont judge me
avec un yasuni tu respect r ca bride grave mec je te conseille pot mxs racing ou stage 6 racing ou un most
C'est un yasuni c16 au cas où
tahat cyllinder is hela cold
ether that engine is ice cold. Or the mixture is waaay to low
my 50cc is the same speed and acceleration
Провал сильный в начале
Waaaay to rich
try aerox 155 cc vva
This will smoke a 155 rox😂
C16 on stage6 Pro sport.. gives only a good top speed , your starting speed is getting rally bad , but Yasuni R will bring life to your Pro sport,
this setup I write here will give you a cool Aerox to run on. Trust me.
Cylinder: stage6 sport pro MK1
Exhaust: Yasuni R
carburetor: 21mm
Membrane: malossi VL12
Studs: original gummy studs
Power filter: your choice
Vario: stage6 pro sport.
Blower: stage6 racing CNC driving fan
V-belt: Polini Kevler
Pulley. Top performance 36˚
Clutch. stage6 Racing Torque control MK2
Clutch bell. Stage6 433gr
Ignition: R-setup
shims: 2 slices (between vario and racing Fan)
Variety rolls: 3.5gr or 4gr
Trim Spring. stage6 Hard
Pressure spring. stage6 Medium
head nozzle: between 98 - 102
Idle nozzle: 42
Do you think for a Stage 6 Racing mk2 a Yasuni C16 City would be better than a Yasuni R?
I'm thinking of buying a Yasuni C16 City
And another Question, is the Yasuni C16 City louder than the Stage 6 Pro Replica?
@@voqzmk2 yes you need c16 if buying MK2 KIT, if buying MK1 then yasuni r is good
@@LegionarHR Hey, I currently have a Sito Plus for daily street use and a C21 for the track.
Really fun to ride around the city with a quiet racing scooter.
For stage 6 racing mk2 i would suggest c16, stage 6 r1200 etc.
For stage 6 sport pro mk2 i would suggest yasuni r or gianelli shot. Maybe polini4race will also run nice. But only for minarelli though! Yasuni c16 on piaggio sucks bigtime
your delusional im driving mine with a c20 and it fucking rips yasuni r is only for basic 70ccs with sport pro mk2 u can get up to 17 hp but not with yasuni r....
Like a 50cc😵😂😂
Its on stage 6
@@1uk416what does that mean
@@bouncii7660its been modded
Naw
Acceleration low
Coś licho
Überdreht ja mal komplett
Aïe ça fait pas chauffer le moteur avant de tirer dedans ! C’est pas bon tout ça
Combien de temps faut-il laisser chauffer le scoot ? 2 minutes ?
@@TheWalkingPotato1 le truc c'est qu'il faut pas le démarrer et tirer dedans à fond directement, tu le laisses par exemple 2 minutes et tu pars pas à fond directement
@@RyZup69 oui c'est bien ce que je pensais, merci
valla patata xD,muerta en salida esta mal tocada de transmision no tiene buenos pesos de rodillos i el cilindro stage 6 sport de hierro seguro que no esta limando i preparado por eso no hace nada la aerox
Imagine spending around 2000$ on a moped
That would be 94 or 100ccm
sul segu veidi vale
In germany we say „scheiss plastebomber“
In germany we say „nach 2 Jahren kommentieren wenn fast keiner mehr hier ist“
@@GustavFicksau tja
In Germany, we also say ,,ich mag große Brüste"
💪💪💪🇺🇦🇺🇦🇺🇦