To everyone complaining this is boring...the channel is called Bret's CRAPPY Shots...I found it entertaining and his voice relaxing (in a Bob Ross type of way). Keep going brother!
I don’t know why I never thought of the sleeve protectors. That’s so time saving and simpler. You can also buy bright colored duct tape and tape a piece of cardboard etc and then paint over the duct tape and that works as well. Also I really enjoyed the video and the unedited “let’s hang out and make stuff” vibe.
nice ideas. One more option for you is to use the same paper you have there, but buy "Carpet Tape" from the hardware store.. huge roll will cover hundreds of sheets.. probably cheaper overall than buying the sleeves or thermal tape.
No idea if you're still seeing comments for this but for your future reference in using those tape dispensers.... The reason you had such a hard time with getting that tape started is it's not suppose to go under the roller. It only goes under the two little tabs on each side and hangs loose OVER the roller. The roller helps to ROLL on the tape as you drag it across a surface. There you go.
I usually do it on rainy days when i cant shoot and have nothin better to do...saving money sometimes takes effort ..Some just dont get that i guess..only thing i dont like is the sound of the tape when i pull it off the roll lol..small price to pay for saving alot of money over time..Waitin on some new videos from ya..Shoot straight and shoot long brother..thanks for sharing!!👍👊
Yes low cost tends to mean more work! And lately I have been using cut up card board boxes and yard sale stickers as my targets. Thank you very much for watching my videos means alot to me and I will be making more videos but with work and everything else going on right now I havent even had time to be able to shoot. Much less make videos. :(
@@BretsCrappyShots Hey bud i meant to tell u what ive been shooting and it works really great.may not be for you but its sooooo cheap..i bought a roll of freezer paper 150 sq. Ft. and a bingo dobber .lol .like ppl mark bingo cards with..my target back ground it 2'×2' and i just tear off a peice of the paper and put as many dots on at as the paper allows.. The end of the dobber is about 1" i think and the paper has a waxy side and a dry side. .cost about 6 dollars for the paper and the dobber..just a thought and a cheap route to go..and u could use a sharpie on the paper for bigger bullseyes if needed..👍👍
Bret Thanks for the great video. I'm sorry that you had such a time with that dad-gum tape. :~)))) I bought one of the Scotch 3-M laminating machines for $29.00 through Amazon. Worth it's weight in gold!! I'm building muzzle loaders and want bleeder targets for the customers to use for sighting in. thanks for this one. God bless: Stoney
well ,watching this again lol , i was gonna do a bunch of them ,but bought a kool color poster from dollar tree ,noe i got use a lot of tape or visquine or cut these papers holders and fill the or put over the poster ! .i need a super big target to stick on one of them blocks you get at wally world for archery ! ,sighting in my new bows ! again great idea brother , hope all is well bro !
Well thanks for watching again lol and all is going well on my end I never have time for anything anymore I havent even got to shoot since the beginning of last spring. Hopefully soon I can get back to it.
hi dont know about where you live but here in England when we was kids we made scratch pictures basically it was differant coloured waxes on paper then ink over top you scratched in picture and it was all differant colour you could use paint . So i asked myself why not use clear wax coloured paper and paint it worked well. also for the steel pellet traps i have a small 4inch square one i put red led into one they have square box section with a slit on top and a hanging hole on back put led and battery on top leds make it bright inside so perfect for night shooting to see holes if need be or low light like on a tree
Pelletonix yes I know all to well there was one video that I had to start over on over 15 times I was ready to say forget it when finally I got it right lol. In this video i was still very new to all of this and i had a fit with that tape.
Ever heard of editing a video? Not to great to watch a guy pealing of tape of a dispencer for like 3 minutes. One other tip, search a chair that aint old or creaking as much, wow that was irritating. Great video besides that. No offence, just giving some feedback. Was curious about the laminated foil too.
this was my 5th video i was still trying to figure out how to edit videos and trying to find a good editing program at the point of this video i was still using a free software which was a pain in the butt to use but now i use power director. Yes the chair was a pain in the butt to listen to but as its not my main chair for videos it was what i had handy. The reason i left me picking at the tape in the video was because my mom and girlfriend got a kick out of watching me struggle with it so much so i figured maybe my viewers would like to see it and maybe get a giggle out of it. Thank you watching my videos and thank you for the pointers!
To everyone complaining this is boring...the channel is called Bret's CRAPPY Shots...I found it entertaining and his voice relaxing (in a Bob Ross type of way). Keep going brother!
Thank you for watching my video and commenting. I am having a hard time not laughing about the Bob Ross comment lol thank you!
Agreed. Glad someone got it. I appreciate the regular guys hanging out feeling it gave instead of watching some master edited production.
Simple.. Get Bright paper, coat it with clear tape.. spray with black Laquer and let dry.. then shoot! I made hundreds!
I hand-poured 14 gallons of molasses before he made one target! Now, the grass needs mowing again! There’s a Part 2? 🤣
I make a lot of these splatter targets and I go straight to the Dollar store to get all I need for the targets!
I don’t know why I never thought of the sleeve protectors. That’s so time saving and simpler.
You can also buy bright colored duct tape and tape a piece of cardboard etc and then paint over the duct tape and that works as well.
Also I really enjoyed the video and the unedited “let’s hang out and make stuff” vibe.
nice ideas. One more option for you is to use the same paper you have there, but buy "Carpet Tape" from the hardware store.. huge roll will cover hundreds of sheets.. probably cheaper overall than buying the sleeves or thermal tape.
That is actually a pretty good idea. Thank you for watching and commenting please feel free to subscribe.
No idea if you're still seeing comments for this but for your future reference in using those tape dispensers.... The reason you had such a hard time with getting that tape started is it's not suppose to go under the roller. It only goes under the two little tabs on each side and hangs loose OVER the roller. The roller helps to ROLL on the tape as you drag it across a surface. There you go.
Lol yeah I know now lol but thank you for your comment and thank you very much for watching my video!!
I found that the cheaper packing tape works best
Why not use clear laminating l
Paper
Well named vid
I usually do it on rainy days when i cant shoot and have nothin better to do...saving money sometimes takes effort ..Some just dont get that i guess..only thing i dont like is the sound of the tape when i pull it off the roll lol..small price to pay for saving alot of money over time..Waitin on some new videos from ya..Shoot straight and shoot long brother..thanks for sharing!!👍👊
Yes low cost tends to mean more work! And lately I have been using cut up card board boxes and yard sale stickers as my targets. Thank you very much for watching my videos means alot to me and I will be making more videos but with work and everything else going on right now I havent even had time to be able to shoot. Much less make videos. :(
@@BretsCrappyShots Hey bud i meant to tell u what ive been shooting and it works really great.may not be for you but its sooooo cheap..i bought a roll of freezer paper 150 sq. Ft. and a bingo dobber .lol .like ppl mark bingo cards with..my target back ground it 2'×2' and i just tear off a peice of the paper and put as many dots on at as the paper allows.. The end of the dobber is about 1" i think and the paper has a waxy side and a dry side. .cost about 6 dollars for the paper and the dobber..just a thought and a cheap route to go..and u could use a sharpie on the paper for bigger bullseyes if needed..👍👍
That's actually a pretty good idea.
Bret
Thanks for the great video. I'm sorry that you had such a time with that dad-gum tape. :~)))) I bought one of the Scotch 3-M laminating machines for $29.00 through Amazon. Worth it's weight in gold!! I'm building muzzle loaders and want bleeder targets for the customers to use for sighting in. thanks for this one.
God bless:
Stoney
Stoney327 yeah that tape was a pain in the butt lol. Making muzzle loaders that's awesome man. And the laminated is by far the easiest.
well ,watching this again lol , i was gonna do a bunch of them ,but bought a kool color poster from dollar tree ,noe i got use a lot of tape or visquine or cut these papers holders and fill the or put over the poster ! .i need a super big target to stick on one of them blocks you get at wally world for archery ! ,sighting in my new bows ! again great idea brother , hope all is well bro !
Well thanks for watching again lol and all is going well on my end I never have time for anything anymore I havent even got to shoot since the beginning of last spring. Hopefully soon I can get back to it.
Well after watching all of that I think the store bought are getting cheaper all the time.
Lol now I just use cardboard or paper with round yard sale stickers on them.
Flat black ,primer made to stick
hi dont know about where you live but here in England when we was kids we made scratch pictures basically it was differant coloured waxes on paper then ink over top you scratched in picture and it was all differant colour you could use paint . So i asked myself why not use clear wax coloured paper and paint it worked well. also for the steel pellet traps i have a small 4inch square one i put red led into one they have square box section with a slit on top and a hanging hole on back put led and battery on top leds make it bright inside so perfect for night shooting to see holes if need be or low light like on a tree
great idea
Roll it on with flat house paint and keep the roller dry
That would actually work pretty good I'd say!
Peel and stick laminating sheets 8 1/2 x 11 but it costs more but convenient
ronald davis I bought a laminator from walmart for $17 works great for me
Great. i never tried it but i didn't see why it wouldn't work. Only need it on one side though.
Hello that roller is on there for a reason
Sometimes these videos just don't go as planned. Hang in there dude.
Pelletonix yes I know all to well there was one video that I had to start over on over 15 times I was ready to say forget it when finally I got it right lol. In this video i was still very new to all of this and i had a fit with that tape.
wow awesome idea thanks bro !!!!
You are welcome
damn that’s a squeaky ass chair
it has since been thrown away
Try doing a trial run before video taping. Script what you want to say and edit... it won't be so boring... REALLY!
for god sake oil that chair lol
i threw it in the trash and got a new chair lol
I make one in 8 min..
Work less and shots will improve
LOL I agree!!!!!
Mercy me this was too long of a video and I didn't even see a sample.
i do show these on some of my other videos
Ever heard of editing a video? Not to great to watch a guy pealing of tape of a dispencer for like 3 minutes. One other tip, search a chair that aint old or creaking as much, wow that was irritating. Great video besides that. No offence, just giving some feedback. Was curious about the laminated foil too.
this was my 5th video i was still trying to figure out how to edit videos and trying to find a good editing program at the point of this video i was still using a free software which was a pain in the butt to use but now i use power director. Yes the chair was a pain in the butt to listen to but as its not my main chair for videos it was what i had handy. The reason i left me picking at the tape in the video was because my mom and girlfriend got a kick out of watching me struggle with it so much so i figured maybe my viewers would like to see it and maybe get a giggle out of it. Thank you watching my videos and thank you for the pointers!
Video editor
Can you from the money that you saved making your own splatter targets, buy another chair please 👍🏻😖
The chair is in the trash and long gone!