How have I not discovered this channel before now?? Your video, your audio and your instruction are all quality. And “Sittin’ on your ass, won’t finish your project.” That’s the best. Keep up the great work.
Thanks for taking time in making these videos believe it or not I’m learning every-time I like how you add to the video when things don’t go perfect and you gotta innovate to make it work! Keep up the great content Jacob!
You said "simple" video, but sometimes the simple ones are just as good or better than the detailed ones. This is another good one in my book. Thank you Puddin'!!
I don't know if everyone found this interesting, but I definitely did. Now you have me looking at sub $300 tilt steering columns for my 68 Mustang. I never knew such a thing existed. 😆
Those velcro straps on your boot come in handy for strapping a bundle of long trim or small pipe you have to haul in your truck. I got my velcro straps from my wife's boot when she had surgery.
Warm weather has me cleaning out my shop so I can roll my new project in. Getting started on a 79 dodge truck. Steering column bearings were toast and when I was taking it apart I lost a bunch of little springs and little parts in my muddy driveway. Now considering one of these universal columns from jegs or speedway because I have no idea how I would find the stuff to put mine back together
I’m not sure how I came across this channel but it’s one of my favourites now. I started watching at the travail build and really enjoyed it and have just gone back and watched all the old videos. Keep up the good work
Looks like a decent column, didn’t look like the angle of the shaft was bad either, sometimes the steepness of the rack shaft can be real sharp, making it pretty hard to keep the u-joints from binding. Yours looks like a great angle, getting anxious to see it driving!!
Exciting for me. I'm looking for a coulm for my 65 C10. Did you say 100$ for it. Wow definitely going check it out. Keep the vids coming great motavation.
Did you try to roundhouse bootleg Bill when he came into your shop just kidding hope it gets better I done broke mine three times right one pop the left one plumb out the socket took 4 months for it to heal
It took me watching at least 30 of your videos to finally find out how you jacked up your foot. Guess my dumbass should have watched the videos in order instead of jumping all over the place.
@@PuddinsFabShop this channel is so interesting. For years I ran 60s internationals for the last 11 years I've ran 99-02 ls Silverados. The blending this guy does is like a drunk idea I may have had...but it would be hard for me to swap out an ih engine..they where the torque and reliability machines of the time
How have I not discovered this channel before now?? Your video, your audio and your instruction are all quality. And “Sittin’ on your ass, won’t finish your project.” That’s the best. Keep up the great work.
Thanks for watching!! Now don’t brag on the audio, the go pro is slacking there for sure!!
Thanks for taking time in making these videos believe it or not I’m learning every-time I like how you add to the video when things don’t go perfect and you gotta innovate to make it work! Keep up the great content Jacob!
Thanks for watching them! 👊🏻
You said "simple" video, but sometimes the simple ones are just as good or better than the detailed ones. This is another good one in my book. Thank you Puddin'!!
Great stuff as always! Watching these have made me get off my rear and working on my Travelall again!
Heck ya!
👍👍. Doesn’t look like the boot is slowing you down much. Another great result. Take it easy 😊
It’s not.
Just finished watching all your videos to date. Enjoyed them greatly, especially since I’m right down here in Ardmore.
Thanks for watching.! Ardmore’s just right up the road.
I'm catching up... Every one of his vids is gold. The world is a better place with Puddin on youtube!
I don't know if everyone found this interesting, but I definitely did. Now you have me looking at sub $300 tilt steering columns for my 68 Mustang. I never knew such a thing existed. 😆
Glad to help! Lol
Those velcro straps on your boot come in handy for strapping a bundle of long trim or small pipe you have to haul in your truck. I got my velcro straps from my wife's boot when she had surgery.
This is what I've been wanting to see. I need a bit more room around the header.
Well I hope this helped somehow.!
Well seeing how to install it, really helped.
Always great tech videos!
Thank you!
crazy with time zones, you already posted a video and i just could not sleep, its 6:35 am were i am at.. looking great
Good timing then! 👍🏻
Great video thanks. That seemed to go together very easy expected to see more problems. Nice work.I hope your foot gets better soon.
It’s was pretty straight forward! It’s getting better.
Hell ya looking good man
It turned out good. Another great video 👍👍🇨🇱
👊🏻thanks Shane. !
looks like i will be changing the column too. lol this will make it much easier with the painless wiring kit i have.
It’s a gm connector. Most harnesses have a option for the gm connection.
@@PuddinsFabShop yup
Nice clean job.
Great job Jake!
Very helpful video!! But kinda weird to watch a Puddin' video without at least one "Oh yeah Baby!!" LOL
Looks good!
Warm weather has me cleaning out my shop so I can roll my new project in. Getting started on a 79 dodge truck. Steering column bearings were toast and when I was taking it apart I lost a bunch of little springs and little parts in my muddy driveway. Now considering one of these universal columns from jegs or speedway because I have no idea how I would find the stuff to put mine back together
I’m not sure how I came across this channel but it’s one of my favourites now. I started watching at the travail build and really enjoyed it and have just gone back and watched all the old videos. Keep up the good work
Thanks for watching joe! I appreciate it.
Looks like a decent column, didn’t look like the angle of the shaft was bad either, sometimes the steepness of the rack shaft can be real sharp, making it pretty hard to keep the u-joints from binding. Yours looks like a great angle, getting anxious to see it driving!!
I’m hoping it’s decent. I’m happy with the angle. I don’t think I’ll have binding issues. I’m ready to see it going.
Love looking at that bad ass machine ... such a good looking ride .
Thank you!
Another good video there man
Looks great !
Thank you!
Things will be taking a good turn soon😂❤
Awesome
Great video always learning from you
👍
Things have changed!!
Great stuff!
Dumb question but doesn’t the battery need some rubber to protect it?
Nice shaft work
😂👊🏻
Looks good
My man!
👊🏻
Exciting for me. I'm looking for a coulm for my 65 C10. Did you say 100$ for it. Wow definitely going check it out. Keep the vids coming great motavation.
It was around 175
Im back watching !! What a your headers please
🤣 bootleg bill! Nice upgrade. Adds a nice classy contrast.
Haha the inside will be nice, ish lol
you did so much with the steering, you should have worn a cowboy hat! YeeHaw
I was looking at one of the Ebay columns for my 51 Chevy truck! Thank you VERY MUCH! Link?
www.ebay.com/itm/28-GM-Style-Universal-Column-Shift-Steering-Column-9-holes-Wheel-Adpater-Polish/401726643854?pageci=ff8f0ea4-f69d-4a9e-8142-9d0060f683d1
👍😁FINS UP 😁👍
👊🏻👊🏻
Did you try to roundhouse bootleg Bill when he came into your shop just kidding hope it gets better I done broke mine three times right one pop the left one plumb out the socket took 4 months for it to heal
I like your moon eyes wheel
I have a few metal flake superior 500’s. !
Do you have a part number for that coupling?
Subscribed!
Thanks Paul!
Where do you get the joints and DD shaft? I only ever see Borgeson and those are pretty pricey.
I got them off eBay.
Got a link for that column, or manufacturers name.
I do not. Cheapo ebay lol
What manifold are those?
Checkout my channel and the videos. I have a whole video just about those👍🏻!
It took me watching at least 30 of your videos to finally find out how you jacked up your foot. Guess my dumbass should have watched the videos in order instead of jumping all over the place.
now were driving sitting on our ass with class ( :💯🦾
That was definitely a heart stopping weak spot on those ihs the splines would strip and cause lose of steering.😟
I believe that by the looks of some of them!
@@PuddinsFabShop this channel is so interesting. For years I ran 60s internationals for the last 11 years I've ran 99-02 ls Silverados. The blending this guy does is like a drunk idea I may have had...but it would be hard for me to swap out an ih engine..they where the torque and reliability machines of the time
Mine may of been a drunk idea lol! My motor was locked up tight. Wasn’t hard for me to make the choice lol.
Existing to me!
👍🏻👍🏻👍🏻
Omg. Veterans. Doc says "take it easy."
Walks around on concrete all day. Motrin. Socks. Hydrate.
Why aren't you listening I'm just gonna do you like my dogs and say focus 2009 chevy hhr steering column installation
You confused me with that one.
Looks too new can it be aged to go with the build better
KK is better at the outro than you.
Eat dirt.
Awesome