You need to get a lawyer and license your design to the truck manufacturers to built this into their tailgates. You will get a royalty on every pickup truck sold forever. Fucking Brilliant.
Great video. I was thinking about making the same design for my truck. I just recently purchased a short bed truck and have no room to carry large cargo. I hadn't realized that somebody had all ready made this design. I think it's a great design. I think your video is awesome. I appreciate your honesty I hope this works out for you. I wish you the best of luck.
Great idea. I've had something like this in my head for a while, and frankly, I'm amazed the OEMs or aftermarket companies haven't developed something similar. You should partner with a company like Diamondback Truck Covers to start cranking these out.
@@user-tm1qc9kf2hIf i ever get one this will be my first mod. The long bed is cool but im used to driving around my 2002 Ford Escape so yeah something shorter would suit me. I have a Motocross Bike and Occasionally hit up Big Bear in the Snow Seasons. I need a truck but it doesn’t need to be big
i also see the possibility of a bed extender table for the camper enthusiastic off roader. just a another Tacoma mod and when not in use the tail gate is a flat surface easy on the knees when climbing in and out many great possibilitys
If this was designed into the liftgate it could slide backwards another foot to convert a 5' truck bed into 8 feet for hauling 8 foot lumber and sheet goods
Perfect! Exactly what I need. The rounded edges of normal tailgate blockers won't fit around the tires of my quad. I need something with square corners. Plus this won't let firewood under the quad slide out. Where do I get one?
he is not hating, he is stating a point that it could be made for $30 probably because this guys setup is over $100 .... Why give him $100 when he can make his own for $30 ...
@@Slavic_Boer ahh .. NO I DID NOT ... it was a generic comment letting you know that i didnt know what proper response i should give to that stupid comment. If you considered that to be a response, then you have more problems than i already knew you had
when you put the tailgate back up it looks like it might bounce around, is there something in the design that would keep it locked flat when the gate is up?
That’s true of every bed extender on the market - including the OEM models from the factory. Based on that it would be street legal in terms of turn signals.
I'd pay in a heartbeat, it's such a great design, and convenient and sqaure. Only other square one I've seen is not collapsible. You have to pay for quality. Or settle for less
This is the best extension I've seen
You need to get a lawyer and license your design to the truck manufacturers to built this into their tailgates. You will get a royalty on every pickup truck sold forever. Fucking Brilliant.
Great video. I was thinking about making the same design for my truck. I just recently purchased a short bed truck and have no room to carry large cargo. I hadn't realized that somebody had all ready made this design. I think it's a great design. I think your video is awesome. I appreciate your honesty I hope this works out for you. I wish you the best of luck.
Came to say the same thing.
Great idea. I've had something like this in my head for a while, and frankly, I'm amazed the OEMs or aftermarket companies haven't developed something similar. You should partner with a company like Diamondback Truck Covers to start cranking these out.
Some Nissan Frontiers come with an adjustable/removable bed extension. My parents own one that does, but never rember they can utilize it.
That's absolutely awesome bro. I'm definitely going to make one of my Tacoma
this will work perfectly for a short bed Tacoma.
@@user-tm1qc9kf2hIf i ever get one this will be my first mod. The long bed is cool but im used to driving around my 2002 Ford Escape so yeah something shorter would suit me.
I have a Motocross Bike and Occasionally hit up Big Bear in the Snow Seasons. I need a truck but it doesn’t need to be big
i also see the possibility of a bed extender table for the camper enthusiastic off roader. just a another Tacoma mod and when not in use the tail gate is a flat surface easy on the knees when climbing in and out many great possibilitys
It’s a great idea and for some reason, I believe you when you say you would send people the difference.
Great idea! I would buy this
If this was designed into the liftgate it could slide backwards another foot to convert a 5' truck bed into 8 feet for hauling 8 foot lumber and sheet goods
would be nice if it had legs so you can double the size of your tailgate, to make a tent porch for truck camping.
Perfect! Exactly what I need. The rounded edges of normal tailgate blockers won't fit around the tires of my quad. I need something with square corners. Plus this won't let firewood under the quad slide out. Where do I get one?
What’s the link to this? I would love to give money to support the campaign or just buy it at this point
I don't have a truck at this time , butt I think it is a wonderful idea
Cool, queue the transformers sound effect! This gives me an idea for an expanding canvas camper top for a short bed!
My patented design!
Super design Larry, thanks.
I saw in the comments that it was 449??? I see why he failed to manufacture and sell them. 199 I would buy one for sure.
I love it. I only have a 51" bed and this would make a world of difference. Where can i buy one
This is so cool. Go on Shark Tank!
“You’re never going to break it”
Whistlindiesel would beg to differ.
Plywood, piano hinge, bolt lock and its done for about $30
Stop hating
he is not hating, he is stating a point that it could be made for $30 probably because this guys setup is over $100 ....
Why give him $100 when he can make his own for $30 ...
@@OjtheCRockSimpson not hating just spitting facts
I steal music from starving artists ... i dont know how to respond to that.
@@Slavic_Boer ahh .. NO I DID NOT ... it was a generic comment letting you know that i didnt know what proper response i should give to that stupid comment.
If you considered that to be a response, then you have more problems than i already knew you had
Good job.simple but functional
Awesome idea! Are you offering these to the public?
Simple, but a brilliant design
Never came to fruition with a price of $500 bucks
Did this ever go anywhere? Is it being built? Was it ever patented?
Super smart my friend very nice
Hey brother - a really smart and functional design. It needs work esthetically. Its just not sexy
Love the idea !
what is the link? I have google searched and nothing pops up
when you put the tailgate back up it looks like it might bounce around, is there something in the design that would keep it locked flat when the gate is up?
Its locked in by being pressed up against the bed rails. No need to worry, wont move at all.
Where can I purchase this ? Also is it possible to have a screen right in middle
Of the back of that ,please get back to me I have 3500 chevy dully
Where do you buy this? No link or product name under description.
Smart invention
Simple and effective.
You’re Genius
Friggin genius!!!!
Well.... did it ever go to production and get marketed yet??
Great video. I live in California how can purchase one I have a 2017 F-150
Are these available to purchase anywhere? Where & how much? No links...
la mejor de todas gracias
Great idea.
Needs air flow thru it.
cool, is it out in the market yet ? for my use, I would not bother attaching it to the tailgate, I like the fact that I can fold it and stow .
We need a link. I can’t find this anywhere.
What a great idea nice
I’m in Anaheim also and would like to get In touch with you
Need this brother
Hey Larry how can I order one of these??????
Do you sell these. I'd like to buy two of them
How do I get one
It looks good but I think is gonna block the lights if ur turning left or right
Would reflectors solve that issue?
That’s true of every bed extender on the market - including the OEM models from the factory. Based on that it would be street legal in terms of turn signals.
I have a 2021 Nissan titan with a roll locking bed cover lemme know it it will work while it's closed
Nice design but too expensive compared to all metal extenders
Where can I get one of these?????
Were can i purchase one of these
blocking the view of your rear lights, no bueno, but good idea
Are these available yet?
This is what I’ve wanted for ever to be able to have my bikes in the back and not have to Caulk them sideways
Do you ship to Canada 🇨🇦
Are u still selling these I would like to buy one
Fr I’m considering a truck but I hate that Open Tail nothing is that much secured
Do you make these for Toyota Tacoma?
where do I buy this?
I want one
How do I buy one?
what about rattles?
Where you can buy it
Were do or how we purchase one.
I want one for my 21 f150
Sooooo how can I get one…
Where can I buy?
U sell these??
Hey how can I buy this
I could build about 600 of these for 449 dollars. Lol
Then go do it and make money
LOOKS FLIMSY
449 sorry sir I can’t afford that but that price is super high for what it is.
.
I'd pay in a heartbeat, it's such a great design, and convenient and sqaure. Only other square one I've seen is not collapsible. You have to pay for quality. Or settle for less
Ill just stick to rachet strapping my shit down its cheap and takes 3mins
449😱😱😱😱😱😱😱😱😱😱😱😱😱
Sounds like an invitation for rust.
🤣🤣🤣🤣🤣🤣🤣
Where do I get this
How do I order one