It sounds amazing. Great job on this video. I am not sure if I'm going to do this mod yet. My money is all wrapped into the Hellcat. It will be a mod later. Thank you! I really enjoyed the video.
Hey dude, liked your video, I believe why your impressed with the extra air sound with your test drive after installing, you removed plastic gap filler from your hood. 👍
Run it without the rain shield it’s even louder that’s how I ran it on my Hellcat all the time I carried the shield in my car in case I got in the rain or was going to wash it
I just start following you man an great content. Congrats first on your Hellcat Challenger. I have a 2021 Challenger Scat Pack that I purchased from a build I spec out. Soon I want a hellcat as well. Just reason I put a JLT cold air intake on it an it sounds good
Hey bro great content I been watching you for a few years and you shouldn’t have to take the plastic piece off I have a widebody redeye challenger with the same hood and All I did to get it to fit was keep rotating the intake tube so that the actual intake itself doesn’t hit that piece trust me that bugged me for months till I figured it out
Really? It's hitting the outer box though not the intake? Thanks for the info man I'll check that out. I appreciate it. I saw a charger 2022 hellcat have the same issue and the shop removed it.
@@landoninahellcat8745 yeah it’s gonna be hard to see looking in but the back of the intake if you stand back eye level while your hood is open the back of the intake itself will be the highest part sticking out of the engine bay so just loosen the intake tube from the throttlebody and keep rotating it till it’s at the lowest point and try it hopefully that helps man that’s all I did to get it to fit
Yo awesome job on the install video , if it wasn't for your in depth vid I would not of been able to install my JLT intake on my 2022 dodge charger hellcat , every video that I searched/watched would not show you exactly how people removed important parts of the install. Thank you for making my job complete 💯 I subscribed
Id hate to live in an apartment complex and have a package that expensive being just left in front of your door like that, especially knowing I won't be home when it gets delivered.
@@landoninahellcat8745 16 challenger scat shaker 84mm Fastman throttle body,stainless works catless mids straight piped,jay greene engine and tranny tuned runs amazing but I need that cat 🐈 😻 🐈⬛️ 😉
@@salimbennohamed8295 How did you got it CARB certified. Because when I go to place an order on JLT website it still says not for sale in California which that’s where I’m from.
I put a JLT on my Hellcat and it ran about 1 mph slower at the track so I went back to the stock system. I could not believe it so I changed it at the track and the car slowed down. I’m not the only person with these results. If you are trying to go faster this may not be for you.
Idk man I had this for 2 years on my scatpack and look how my car performed. I roll race though. Idk man I've noticed stock temps were higher. Who knows czcams.com/video/OE1O4lsJ8hA/video.html
Legmaker true CAI is far better. Cools down much faster and initial intake temps are vastly reduced. I’ve owned both and won’t go back to the JLT aka SBA
The Legmake is louder but does not make the gains the JLT makes. I've seen the same day dyno results. JLT makes more wheel hp and torque. Have you seen this? czcams.com/video/Pr3BEJAomgg/video.html
@LANDON IN A HELLCAT I have this exact same JLT intake on my 2017 Hellcat. Having a little trouble getting a replacement cone (Red, just like yours). Any ideas of the best place to order one?
It sounds amazing. Great job on this video. I am not sure if I'm going to do this mod yet. My money is all wrapped into the Hellcat. It will be a mod later. Thank you! I really enjoyed the video.
Thanks a lot! I really appreciate your support on the channel man! Thanks for stopping by👍🤝
@@landoninahellcat8745 Always!
Hey dude, liked your video, I believe why your impressed with the extra air sound with your test drive after installing, you removed plastic gap filler from your hood.
👍
I just want to say I appreciate your posting. You have a good head on your shoulders and don't BS your viewers. Well-deserved on your new Hellcat.
Thanks for the kind comment! I really appreciate you! Hope you have and awesome day!
Run it without the rain shield it’s even louder that’s how I ran it on my Hellcat all the time I carried the shield in my car in case I got in the rain or was going to wash it
I knew it was going to be an intake as first mod. Heck yes!!
Thanks man! I've always been a JLT fan ever since we dynoed my 392 and made a lot of power over the stock airbox.🤝👍
I just start following you man an great content. Congrats first on your Hellcat Challenger. I have a 2021 Challenger Scat Pack that I purchased from a build I spec out. Soon I want a hellcat as well. Just reason I put a JLT cold air intake on it an it sounds good
Thanks so much Marcus for following the content! Congrats on your new Scat! The 392 is a badass platform! Enjoy the ride!
Best intake in the game 💯💯💯
Thanks man! I love JLT haha
Hey bro great content I been watching you for a few years and you shouldn’t have to take the plastic piece off I have a widebody redeye challenger with the same hood and All I did to get it to fit was keep rotating the intake tube so that the actual intake itself doesn’t hit that piece trust me that bugged me for months till I figured it out
Really? It's hitting the outer box though not the intake? Thanks for the info man I'll check that out. I appreciate it. I saw a charger 2022 hellcat have the same issue and the shop removed it.
@@landoninahellcat8745 yeah it’s gonna be hard to see looking in but the back of the intake if you stand back eye level while your hood is open the back of the intake itself will be the highest part sticking out of the engine bay so just loosen the intake tube from the throttlebody and keep rotating it till it’s at the lowest point and try it hopefully that helps man that’s all I did to get it to fit
Thanks alot man! I'll definitely go look into this. I appreciate your info!🤝👍
Wise, great comment
Yo awesome job on the install video , if it wasn't for your in depth vid I would not of been able to install my JLT intake on my 2022 dodge charger hellcat , every video that I searched/watched would not show you exactly how people removed important parts of the install.
Thank you for making my job complete 💯 I subscribed
No problem sir! I appreciate it and glad my video helped you out! Thats awesome. Thanks for the sub! 🤝👊
Karen doesn't like you working on that car in her parking lot 😡🤓😆
😆😆😆 lol
Id hate to live in an apartment complex and have a package that expensive being just left in front of your door like that, especially knowing I won't be home when it gets delivered.
You basically have a dodge demon
It sounds real good, I wonder how it would sound in track mode.
Thanks man! I'll try it out later today!
@@landoninahellcat8745 ok I'll go watch the video for you
hey Landon. im getting a jlt cai installed in a few weeks. gonna have them dyno before and after. 2022 charger hellcat. i'll film and post results.
Nice man! I'll be looking forward to the video!
🔥 install vid though making me want to switch lol
Thanks Lol what are you running now?
@@landoninahellcat8745 16 challenger scat shaker 84mm Fastman throttle body,stainless works catless mids straight piped,jay greene engine and tranny tuned runs amazing but I need that cat 🐈 😻 🐈⬛️ 😉
Where do I buy
Check our my new video! JLT has released a better one 👍👊
That plastic piece is pointless bro. As long as you removed it without breaking the clamps it’s all good 💯🏁
Thanks man! I appreciate that! 🤝👍
Does the JLT kit comes with the CARB certified label?
It came with mine
@@salimbennohamed8295 How did you got it CARB certified. Because when I go to place an order on JLT website it still says not for sale in California which that’s where I’m from.
What CAI was on you’re old Scat Pact and what would you recommend? Thanks man!
The JLT I have a dyno video of the JLT on my scatpack! Thanks for stopping by
I put a JLT on my Hellcat and it ran about 1 mph slower at the track so I went back to the stock system. I could not believe it so I changed it at the track and the car slowed down. I’m not the only person with these results. If you are trying to go faster this may not be for you.
Idk man I had this for 2 years on my scatpack and look how my car performed. I roll race though. Idk man I've noticed stock temps were higher. Who knows
czcams.com/video/OE1O4lsJ8hA/video.html
@Nunya Beezwax no
Aye bro we’re you get the catch oil and the hellcat emblem from?
Might mouse solutions! They make the best catch cans. Make sure to subscribe! Thank you
Great intake, but I really hope u don't leave that Kat outside vs a garage
Team dodge number one
You know it!
Legmaker true CAI is far better. Cools down much faster and initial intake temps are vastly reduced. I’ve owned both and won’t go back to the JLT aka SBA
The Legmake is louder but does not make the gains the JLT makes. I've seen the same day dyno results. JLT makes more wheel hp and torque. Have you seen this? czcams.com/video/Pr3BEJAomgg/video.html
Legmaker traps heat bruh
@LANDON IN A HELLCAT I have this exact same JLT intake on my 2017 Hellcat. Having a little trouble getting a replacement cone (Red, just like yours). Any ideas of the best place to order one?
So you should be around 680 wheel? Thats impressive.
You get any gains with it?
JLT VS AFE stage 2 ??? Thinking of going with afe
JLT makes more power.
Between that or the lmi intake what’s the difference I notice a lot of guys go with the lmi intake
Here is the dyno results from Legmaker vs JLT. JLT makes a lot more power.czcams.com/video/Pr3BEJAomgg/video.html
Does this void the warranty?
You made it Way Harder than it really is...
OK. Can you come to my house and put one on my charger, please? I'll hold the camera for you.
Haha are you joking?😆
@@landoninahellcat8745 of course, lol. unless....haha. yeah, joking. Thanks for the vid. Looks like I know what I'm doing soon.
Lol! No problem. Thanks for stopping by🤝
Bwoody is louder
Yeah it is but doesn't make the gains the JLT does. This intake makes 20 to 25 wheel the others done.