Thanks for the overview. Sadly, I have an issue. I can successfully connect to my "Grove Vision AI V2, but the "Device" status still shows "Please connect the device to your PC". I am using Chrome and have rebooted my computer, reinstalled the CH343 drivers... and still nothing. Do you have any suggestions?
Are you able to see the COM port in the device manager? Try with different cables.
Před 2 měsíci
@@benerdorg Yup, shows up fine in Device Manager. I can "connect" to it fine, but the "Please connect the device to your PC" message remains, but cannot do anything else. I tried 3 different USB 3 cables... different USB3 ports... USB2 ports and they all behave the same. If I connect other USB devices to these ports, they work fine.
Hi, we can’t directly compare this Huskylense because both of them have different futures and functionalities. Also we can’t tell which one is better. Based on your use case you select on of them . For example you want to integrate with Edge Impulse and you want more FPS and you want to directly use with Xiao boards means you can use Grove one. But if you are a STEM educator you want use some graphical ide and you want to use only limited models means you can directly go for Huskylense. If you are a beginner Huskylense is much better if you are a developer Grove is better. There is lot more to discuss on this. But Im telling this from my experience.
My board connects, I can flash new models, but I don't see any preview/results, and no logs... the invoke button is simply disabled. I've connected the CSI camera right and I can see is recognized in the syslog. Any idea?
thanks for the great intro video. I've got my Grove Vision AI V2 up and running : )
Great to hear!
Hello 😊
Hello 😊
Thanks for the overview. Sadly, I have an issue. I can successfully connect to my "Grove Vision AI V2, but the "Device" status still shows "Please connect the device to your PC". I am using Chrome and have rebooted my computer, reinstalled the CH343 drivers... and still nothing. Do you have any suggestions?
Are you able to see the COM port in the device manager? Try with different cables.
@@benerdorg Yup, shows up fine in Device Manager. I can "connect" to it fine, but the "Please connect the device to your PC" message remains, but cannot do anything else. I tried 3 different USB 3 cables... different USB3 ports... USB2 ports and they all behave the same. If I connect other USB devices to these ports, they work fine.
❤❤
If compare to Huskylens, which one is better?
Hi, we can’t directly compare this Huskylense because both of them have different futures and functionalities. Also we can’t tell which one is better. Based on your use case you select on of them . For example you want to integrate with Edge Impulse and you want more FPS and you want to directly use with Xiao boards means you can use Grove one. But if you are a STEM educator you want use some graphical ide and you want to use only limited models means you can directly go for Huskylense. If you are a beginner Huskylense is much better if you are a developer Grove is better. There is lot more to discuss on this. But Im telling this from my experience.
Did you have to solder the headers to the xiao board? I got mine but I've got no headers and then I can't connect the xiao board to the Grove vision
Yes, you have to solder the headers.
My board connects, I can flash new models, but I don't see any preview/results, and no logs... the invoke button is simply disabled. I've connected the CSI camera right and I can see is recognized in the syslog.
Any idea?
Hi, May be you can try out the sample models from the sensecraft and cross check the response