I like to bed my seating stems with epoxy then relive the tip with a small drill bit for the variation tips. Works good and if you use enough release agent you don't loose a impossible to get Berger LOL
Welcome back. Question - does Kroil (when allowed to soak in the bore) loosen up fouling for easier removal? Q2 - do you accurize rifles to your specs? Q3 - I think I know the answer to this but do you teach reloading or do custom reloading if provided with the brass, bullets, and CBTO? Q4 - last question - whatever happened with that idiot that was buzzing you in that small plane?
Great to see you back , Do you remove all your copper in the barrels' . Some people say that the copper doesn't keep building up after a couple of shots you only have to clean out with oil .
@@GraemeCaldwell-kc1gm Dear Sir - each barrel is an individual, you clean according to what the barrel (and targets) tells you it needs. See some of our old videos. Thanks.
Does anyone know will the 33 XC work in a Weatherby Mark 5 action is this action long enough to be used for 33 XC ? His complaints about the brass to be is nit picking and for me I'm not trying to shoot same hold groups in a match shooting event. Once the brass is run through the sizing dies the shoulder is set to spec again.
@@roadkillanonymous4807 I talked to tecs at Peterson Brass about the 33XC so looks like the Rara Brevex Mauser I own would be a choice for the 33 XC but I am happy having the Brevex Mauser in 8mm-378 Weatherby mag. Another option I checked into is Bat Machine actions do work for the 33 XC but I am no longer interested in the 33 xc build so I am staying with the 8mm-378 WBY in the Brevex Mauser I have owned since I was around 18 and now I am 64 Years old.
I like to bed my seating stems with epoxy then relive the tip with a small drill bit for the variation tips. Works good and if you use enough release agent you don't loose a impossible to get Berger LOL
Dear Sir - I have heard of that but never done it. If using only one specific bullet it would make sense. Thanks.......
I'm liking the new microphones.
Dear Sir - Thanks. Hopefully they help.
Welcome back. Question - does Kroil (when allowed to soak in the bore) loosen up fouling for easier removal? Q2 - do you accurize rifles to your specs? Q3 - I think I know the answer to this but do you teach reloading or do custom reloading if provided with the brass, bullets, and CBTO? Q4 - last question - whatever happened with that idiot that was buzzing you in that small plane?
Dear Sir - too much for email, please just phone us........thanks.
@@quarterminutemagnums Okay, thanks.
Great to see you back , Do you remove all your copper in the barrels' . Some people say that the copper doesn't keep building up after a couple of shots you only have to clean out with oil .
Dear Sir - we do what serious bench-rest shooters do. Go to a match - best education you can get. Thanks.
@@quarterminutemagnums I live in country Australia , no bench rest shooters where I live,
@@GraemeCaldwell-kc1gm Dear Sir - each barrel is an individual, you clean according to what the barrel (and targets) tells you it needs. See some of our old videos. Thanks.
I feel yer pain on bad brass…I had 3 nosler 6.5prc with splits and as hard as it is to find that makes a man mad…
Dear Sir - when brass cost $3.00 per piece it should be perfect ! Thanks.......
@@quarterminutemagnums I told them keep it up and I’d sick you on em…so keep yer mask and outfit close just in case
Sorry Sir. You still need a stabilizer (steadicam) or a tripod for the camera ( ; Because it is a little dizzy ( ;
Dear Sir - we take donations.....thanks.
Does anyone know will the 33 XC work in a Weatherby Mark 5 action is this action long enough to be used for 33 XC ?
His complaints about the brass to be is nit picking and for me I'm not trying to shoot same hold groups in a match shooting event.
Once the brass is run through the sizing dies the shoulder is set to spec again.
?????????????????????????????????
It could work as a single feed. Not as a repeater.
@@roadkillanonymous4807 I talked to tecs at Peterson Brass about the 33XC so looks like the Rara Brevex Mauser I own would be a choice for the 33 XC but I am happy having the Brevex Mauser in 8mm-378 Weatherby mag.
Another option I checked into is Bat Machine actions do work for the 33 XC but I am no longer interested in the 33 xc build so I am staying with the 8mm-378 WBY in the Brevex Mauser I have owned since I was around 18 and now I am 64 Years old.
@@Lure-Bensonholy smokes an 8-378? Now there’s an odd duck!!!! That’s a neat idea.
I’ll be a test pilot for yall
Dear Sir - If you live close and work cheaply.......thanks.
@@quarterminutemagnums I’d work cheap just build me a 33 xc
I would fly out just to blast a few with you. On the house, of course. I'm still waiting to hear your thoughts on the 7PRC.
@@caseyblack7144 Dear Sir - Still no loaded ammo, still no brass ! Thanks.