I won’t make the decision just yet, and thank you. This Bosch is looking good after hearing/seeing your review. Nothing is perfect and I’m grateful for your obviously expert, critical analysis. Looking forward to more critical explanations and why I should/or not consider what. Wise channel.
Got this Bosch GTS15-10 table saw as a gift for Christmas 2023. Your review is bang-on with what I found right out of the box as far as setup, calibration and adjustments. The manual is excellent. I bought the optional accessory out-feed and left-side supports. They're pretty good, but the one support has a c-clip that snags on a screw on the underside of the table when extending or retracting the support. It's a very minor thing. The clamp-zone is a handy feature. This table saw overall is very well executed. Thanks for your review, great job!
Thanks for the insight! We checked out the table extension in the 4100 review and for some reason I decided not to buy it for this one. I keep most of the table saws I review for additional testing and comparison vids but when the time comes to make space this Bosch will be tough to get rid of. It's very well designed with some great features and power. Thanks for watching!!
Thanks for this review, I've been on the fence about which saw to buy, I already have a combo of Bosch tools along with some Festool. You are the best tool reviewer on CZcams hands down. Informative and detailed explanations make all the difference, Keep up the great work, I really appreciate it, thanks from down in New Zealand.
In 2007 I got the Bosch 4000. In 2019, all the smoke escaped from the motor, along with all the factory-installed sparks and flames. I wasn't able to capture them and put them back, so I replaced it with the 4100. Now after seeing this saw, I'm tempted to clean up and sell the 4100 (still in very good condition) and replace it with this. (I also have the 18v cordless model.)
Great review! Really happy I bought this saw as a result. Tape is an issue. I don’t have space for a cabinet saw, but this is a great little machine. Various after market improvements and customizations can make it nearly perfect
Great review. I’ll say it til I’m blue in the face, I’ve loved everything from Bosch that I have. I keep hoping they will release some of the stuff that Europe gets. Some of it looks to be right along side the quality of festool. The routers they have in Europe make the ones they release here look pretty cheap
Ive always equated Bosch and Festool to a small degree at least. Both are higher end Euro brands that I don't see too often in the industries Ive worked. Im looking forward to getting more into Bosch's power tool line in the near future. Thanks for watching!
Thank You!! Who would have guessed Id have to check the accuracy of the rulers on all the new table saw reviews. 🙄 Maybe they should partner with Lufkin, or maybe I should start checking all my tape measures!! Thanks for watching!
Great review! Really happy I bought this saw as a result. Tape is an issue, but I’ve seen that on a lot of saws in this price range, the rest of the features more than made up for it. We can fix that with aftermarket tape
Nice saw! I really like how the angle stops flip out of the way so you don't have to monkey around with them every time you want those extra 1-2 degrees. Good job.
This ones impressive all around. It'll be tough to choose between this and the Skilsaw when making room for more time comes around. Thanks for watching!
Ive always felt the Bosch's quality is excellent. That inaccurate ruler genuinely surprised me. Well get to some Bosch battery powered tools soon I hope. Thanks for watching Tom!!
I'll bet you're right about the arbor extension, Mike. As for the inaccurate rule, I never trust them anyway; after all, they're on an aluminum table. Just measure twice and go. Looks like one of the very best of the jobsite saws and highly recommendable for anybody who isn't already in possession of a good one.
You gotta love how dados are outlawed in a lot of Europe for safety reasons but we get the screwball workaround here in the States. Thanks Europe....🙄 Otherwise this is a really good saw. Thanks for watching Rick!
New to the channel and great reviews. I like that your reviews are always letting "us" decide. My beloved Bosch 4000 just died after 17 years and have been debating whether to fix it or replace it. Would love to see a shootout between this Bosch, the Skilsaw SPT99-11 and DeWalt 7491RS. These three seem to be the cream of the jobsite crop right now. Interesting that DeWalt has dropped the price the past few weeks across the board (HD, Lowes and Amazon), I wonder if they are feeling it or if they are going to be releasing an updated version soon. My black horse pick (or is it green horse?) - I'd like to see the Metabo HPT C10RJ reviewed.
Finally metal gears. I have 2 GTS10J and the rubber gears pretty much wear themselves out quickly. But is their mitre slot still proprietary? Sucks because I can’t buy any 3rd party sleds or rails.
There we have it! another great review, Honest and in-depth, really appreciate your hard work and dedication to the channel, looking forward to the other saws you mentioned. Thanks again
Thanks for watching Dusty! Im the most excited for the Masterforce. A quick CZcams search produces not a single video about that saw, which I find shocking. I guess the regional distributor, zero marketing and generic name has produced the internet hype you would expect. See you in the next one!
I was taught "1 rule for any job." I don't use the table edge rules on any tool, and use the tape/ruler I did the original lay-out with. Just sayin Mike. Thanks for the post. Take care & stay safe.
Great and concise Review. Bosch comes so so close to making the ‘perfect’ saw here, lousy table tape measure notwithstanding! Come on Bosch! 🙄 @20:54 NO NO !!! Please be safe! Take care Big Mike! 👍💪🇺🇸😀
I'm sure the ruler issue has much to do with the coefficient of thermal expansion of the plastic tape, how much it was stretched during application to the *aluminum-* and at what temperature it was applied. Combine that with any temperature differential between your garage and the Taiwanese factory.
That’s a really interesting thought. Too bad they don’t allow us to install the tape. I’ve done it before on a Phaedra I bought for cutting picture frame molding. That said I have a Fletcher mat cutter. I added a squaring arm to cut mat board. The tape they give you slides into a groove that you can adjust left or right. Once taped the end of the tape stays in place and boom, it’s all done.
Just started watching your channel and must compliment you on your reviews. I have gone through 2 Bosch 4100, both used almost daily in Home Construction. In both cases the bearings in the motor failed. The GTS15 was on my short list but I opted to give the Skilsaw a try. I think that the worm drive motor will hold up better.
Hopefully that Skilsaw holds up better for you. Failed motor bearings is the number one complaint Ive heard about the 4100. Im hoping they fix that issue with the GTS15-10. Time will tell! Thanks for watching Felix!
I agree that Hercules miter saw looks I bit like a DeWALT. Ppl said that about the Hercules table saw but I didn't see it with that one. Hopefully the miter is good quality since its considerably less money then the yellow brand. Thanks for watching Conan!!
Great review as always! You mentioned in an answer to a comment that you find the skilsaw and this as top two picks in you current “fleet”. What makes the skilsaw rank anywhere near the quality of this saw?
Dang I think I might be sold on it. I saw it was cheaper than the Dewalt currently. I may have to jump on it. Though I'm interested to see what the masterforce is all about. I've seen those for years but there's very little in the way of videos and reviews for that one. Will definitely be cool to see if it does well, seems well built but you never know, looks can be deceiving.
Searching CZcams produced not one video on that Masterforce table saw. Crazy. I also never noticed until this moment that Menards has no customer reviews on the website. I never watch others review vids on tools but I will check the companies website for written customer reviews and common complaints. We're going into this one blind which makes it more fun, IMO. Thanks for watching!!
Short answer, possibly. I have multiple vids with that DeWALT which is now back with its owner. That reviewed saw is 10 years old and Im told the newest version has multiple updates. We'll see if I can squeeze it into the budget, after all it definitely gets the views. Thanks for watching!
LOL!! Didn't notice that new battery powered saw! Seems everything I get for review gets replaced or bested by something new! Wish they sold it as a kit since I haven't jumped into that battery line yet. Thanks for the heads up!
@@ProjectsForAllReviews Hercules brushless tools are awesome dude you should try them, and batteries are extremely reasonably priced. And the 5-year no questions asked return to the store warranty like Sears in the old days... I'm not saying they're the best but their competitive
On these reviews, how many amps is the circuit you are plugging into? My Skil 6703 is pretty nice but it kicks my 15 amp circuit in almost every cut. I have to tap a 20 amp circuit from the kitchen to get around that.
Great video. Would you be able to tell me the difference between this saw and Bosch 4100xc saw? I have an opportunity to buy a 4100xc on sale. However, I want to buy the best out of the 2 saws. Thank u.
Just note the 4100 series is notorious for motor failures. Generally either the circuit board (for the soft start) or the bearing. I have a 4000 (the model before) and just cooked the motor (after 17 years, in my case, I think it's the field coil). I'm an advanced DIYer but I imagine if this was on a contractor's truck that 17 years would have been much, much sooner. That said, I'm still leaning towards this as the replacement. The other two options would be the Skilsaw SPT99-11 and DeWalt 7491RS.
As far as the scale, maybe the are using 25mm per inch rather than 25.4mm and the weird arbor nut for dados might be a cheap way to produce a USA saw WITH dado capability and a second model for the EU without the threaded end of the arbor (no DADO for EU).
Good jolly, Mike, this looks like a heck of a saw. Now if I could only come up with $650 (sales tax here is crazy); that's about the same as I payed for my cabinet saw years ago. But, I really want to have a saw dedicated to a dado blade that I can move easily. Does it come with the zero clearance throat plate, or the dado throat? I guess made in Taiwan is better than made in China. I'd have to agree on that arbor length and the nut. Good luck, brother. Man, you hogged that out all in one pass, that's impressive. I like the saw, but I'm waiting to see the other saws before I make a choice. It's a bit cheaper than the DeWalt...but I think you can guess how I lean.
Hey Meat! This ones got a lot of good stuff going for it. The throat plates were extra but not too expensive. Just got back from Lowes with the Kobalt saw. With the Masterforce and red Skil should make for a good cheap saw shootout. Maybe we'll do a round of ultra cheaps soon too. The Ryobi is hanging over me like a black cloud, will have to get to it eventually. Thanks for watching!
So Mike you've tested quite a few table saws has anyone come close to beating out the DELTA ❓ AND AS FAR AS THE MEASURING scale on the table saw did you replace the original one are how did you adjust it ❓thanks as always appreciate your content very informative and fun to watch 😊
I seriously doubt we'll find a job saw that will make me get rid of the Delta. Every so often I contemplate selling it to make space but I know Id instantly regret it. Truth is I rarely use it anymore since I always have review saws that need testing. Ive sold a few off but still currently have seven table saws in the garage including the Delta. 🤣 I meant to replace the ruler on the big Skilsaw after the review but now I'm glad I didn't since it made a good point in this vid. Thanks for watching!
@@ProjectsForAllReviews Appreciate your response Mike, So now excluding the DELTA out of the job site saws "if" you had to pick one which one would it be ❓
@myk1200s The answer might surprise you. Since the Delta stays I’d lean towards small and powerful and would most likely keep the 8 1/4 Skilsaw Wormdrive. Outstanding quality and power. It could be bested by a battery powered saw but time will tell.
Little bird told me should hopefully be released in the US at the end of the year. I’d be surprised if Evo doesn’t send one over for review. Solid yes on this one. Thanks for watching!
Some of the older vids definitely had audio issues before I figured it out. This is the first video edited on my new desktop setup without headphones. I'll have to reexamine. Thanks for the heads up and for watching!!
Does look like it's nice, I see guys getting these jobsite saws to save room only to build it into a bench that takes more room then a contractor saw, even cabinets lol never understood that as they will never be as good as either I just mentioned, I've heard Bosh don't work well with common accessories and only use Bosh accessories which is a huge turn off, least that's the case with their routers..
I’m looking to get into woodworking, I want to try to make chairs, small to medium sized tables, and other similar projects, would this be a good table saw to get? Never owned one before
LOL!!! Seems like I'm spending budget table saw money at the grocery store on the weekly. 2-3 visits to Jewel is about the $ equivalent of 1 high end job saw! Thanks for watching!
Skil is now the parent company of Robert Bosch, so it's not a stretch of imagination to see both the Bosch and Skil tapes off to the same degree. Someone mentioned temperature at application. Maybe so. In any case, I never trust those tapes for anything but coarse measures...like if I need an eight inch cut, slide the fence close to 8 while I'm grabbing my tape. On tape measures: if you start a project with one certain tape, use that specific tape all the way through to completion. There is just enough difference between a DeWalt inch and a Milwaukee inch to give you migraines...just sayin' 😮😢
I agree the ruler on table saws is only on there because it would be weird if there was no ruler. I do however use the ruler on my Delta for non super critical cutting, it's done fine. To my knowledge Chervon bought Skilsaw and Skil from Bosch and that's were the similarities come from. Would have made sense to me for Bosch to change the ruler design to differentiate the new saw from their previous designs that they sold, seems lazy to me. But what do I know? 😂 Thanks for watching!
Sorry, have to correct something here. Bosch used to be the parent company of Skil. However Bosch sold the Skil brand to Chervon, the company that makes Flex, E-Go and some of the Kobalt line, several years ago.
I greatly appreciate the integrity and thoroughness of these reviews. Another high quality production.
Thank you!! We've got some good ones in the works, thanks for watching!!
I won’t make the decision just yet, and thank you. This Bosch is looking good after hearing/seeing your review.
Nothing is perfect and I’m grateful for your obviously expert, critical analysis. Looking forward to more critical explanations and why I should/or not consider what.
Wise channel.
Got this Bosch GTS15-10 table saw as a gift for Christmas 2023. Your review is bang-on with what I found right out of the box as far as setup, calibration and adjustments. The manual is excellent. I bought the optional accessory out-feed and left-side supports. They're pretty good, but the one support has a c-clip that snags on a screw on the underside of the table when extending or retracting the support. It's a very minor thing. The clamp-zone is a handy feature. This table saw overall is very well executed. Thanks for your review, great job!
Thanks for the insight! We checked out the table extension in the 4100 review and for some reason I decided not to buy it for this one. I keep most of the table saws I review for additional testing and comparison vids but when the time comes to make space this Bosch will be tough to get rid of. It's very well designed with some great features and power. Thanks for watching!!
Thanks for this review, I've been on the fence about which saw to buy, I already have a combo of Bosch tools along with some Festool.
You are the best tool reviewer on CZcams hands down. Informative and detailed explanations make all the difference, Keep up the great work, I really appreciate it, thanks from down in New Zealand.
Glad you liked the review! I really appreciate the support, Thanks for watching!!
In 2007 I got the Bosch 4000. In 2019, all the smoke escaped from the motor, along with all the factory-installed sparks and flames. I wasn't able to capture them and put them back, so I replaced it with the 4100. Now after seeing this saw, I'm tempted to clean up and sell the 4100 (still in very good condition) and replace it with this. (I also have the 18v cordless model.)
Great review! Really happy I bought this saw as a result. Tape is an issue. I don’t have space for a cabinet saw, but this is a great little machine. Various after market improvements and customizations can make it nearly perfect
Great review. I’ll say it til I’m blue in the face, I’ve loved everything from Bosch that I have. I keep hoping they will release some of the stuff that Europe gets. Some of it looks to be right along side the quality of festool. The routers they have in Europe make the ones they release here look pretty cheap
Ive always equated Bosch and Festool to a small degree at least. Both are higher end Euro brands that I don't see too often in the industries Ive worked. Im looking forward to getting more into Bosch's power tool line in the near future. Thanks for watching!
Great video Mike! That ruler is crazy. You’d think a $600+ saw would give us an accurate ruler. That deep dado cut was impressive!
Thank You!! Who would have guessed Id have to check the accuracy of the rulers on all the new table saw reviews. 🙄 Maybe they should partner with Lufkin, or maybe I should start checking all my tape measures!! Thanks for watching!
Great review! Really happy I bought this saw as a result. Tape is an issue, but I’ve seen that on a lot of saws in this price range, the rest of the features more than made up for it. We can fix that with aftermarket tape
Nice saw! I really like how the angle stops flip out of the way so you don't have to monkey around with them every time you want those extra 1-2 degrees. Good job.
There is some pretty good features on this one! Thanks for watching Jeff!
Very great design table saw from bosch and the sound of the motor is what impressed me most.
This ones impressive all around. It'll be tough to choose between this and the Skilsaw when making room for more time comes around. Thanks for watching!
Bosch is great for small shop, their tools have better QC, but it came with a higher cost, heavier and bigger in size.
Ive always felt the Bosch's quality is excellent. That inaccurate ruler genuinely surprised me. Well get to some Bosch battery powered tools soon I hope. Thanks for watching Tom!!
I'll bet you're right about the arbor extension, Mike. As for the inaccurate rule, I never trust them anyway; after all, they're on an aluminum table. Just measure twice and go. Looks like one of the very best of the jobsite saws and highly recommendable for anybody who isn't already in possession of a good one.
You gotta love how dados are outlawed in a lot of Europe for safety reasons but we get the screwball workaround here in the States. Thanks Europe....🙄 Otherwise this is a really good saw. Thanks for watching Rick!
New to the channel and great reviews. I like that your reviews are always letting "us" decide.
My beloved Bosch 4000 just died after 17 years and have been debating whether to fix it or replace it.
Would love to see a shootout between this Bosch, the Skilsaw SPT99-11 and DeWalt 7491RS. These three seem to be the cream of the jobsite crop right now.
Interesting that DeWalt has dropped the price the past few weeks across the board (HD, Lowes and Amazon), I wonder if they are feeling it or if they are going to be releasing an updated version soon.
My black horse pick (or is it green horse?) - I'd like to see the Metabo HPT C10RJ reviewed.
As soon as you showed the power button, I knew what was comin' 😹😹😹😹
LOL!!!! Thanks for watching Greg!
Finally metal gears. I have 2 GTS10J and the rubber gears pretty much wear themselves out quickly. But is their mitre slot still proprietary? Sucks because I can’t buy any 3rd party sleds or rails.
There we have it! another great review, Honest and in-depth, really appreciate your hard work and dedication to the channel, looking forward to the other saws you mentioned. Thanks again
Thanks for watching Dusty! Im the most excited for the Masterforce. A quick CZcams search produces not a single video about that saw, which I find shocking. I guess the regional distributor, zero marketing and generic name has produced the internet hype you would expect. See you in the next one!
I was taught "1 rule for any job." I don't use the table edge rules on any tool, and use the tape/ruler I did the original lay-out with. Just sayin Mike. Thanks for the post. Take care & stay safe.
Wise advise Doug. Not switching tapes is key for sure. Thanks for watching!
Great and concise Review. Bosch comes so so close to making the ‘perfect’ saw here, lousy table tape measure notwithstanding! Come on Bosch! 🙄
@20:54 NO NO !!! Please be safe!
Take care Big Mike! 👍💪🇺🇸😀
I'm sure the ruler issue has much to do with the coefficient of thermal expansion of the plastic tape, how much it was stretched during application to the *aluminum-* and at what temperature it was applied. Combine that with any temperature differential between your garage and the Taiwanese factory.
I'll have you know I keep my garage at the same temp and barometric pressure as Taiwanese factories.....🤥 Thanks for watching as always!!!!
That’s a really interesting thought. Too bad they don’t allow us to install the tape. I’ve done it before on a Phaedra I bought for cutting picture frame molding. That said I have a Fletcher mat cutter. I added a squaring arm to cut mat board. The tape they give you slides into a groove that you can adjust left or right. Once taped the end of the tape stays in place and boom, it’s all done.
Just started watching your channel and must compliment you on your reviews.
I have gone through 2 Bosch 4100, both used almost daily in Home Construction. In both cases the bearings in the motor failed. The GTS15 was on my short list but I opted to give the Skilsaw a try. I think that the worm drive motor will hold up better.
Hopefully that Skilsaw holds up better for you. Failed motor bearings is the number one complaint Ive heard about the 4100. Im hoping they fix that issue with the GTS15-10. Time will tell! Thanks for watching Felix!
Always an awesome detailed review Mike! Thanks for sharing!
Glad you liked it Michael. Thanks for watching!
Great review! Nice saw!
Thanks for watching Timothy!
Another great one in the books Mike. Keep it up. Looking forward to the upcoming reviews. That hercules miter saw reminds me a lot of the dewalt.
I agree that Hercules miter saw looks I bit like a DeWALT. Ppl said that about the Hercules table saw but I didn't see it with that one. Hopefully the miter is good quality since its considerably less money then the yellow brand. Thanks for watching Conan!!
Awesome review video! I found it so helpful! Thank you!
Glad it was helpful! Thanks for watching!!!
I have the older model and I don’t know how to adjust my fence. It’s always cricket
Great review as always!
You mentioned in an answer to a comment that you find the skilsaw and this as top two picks in you current “fleet”. What makes the skilsaw rank anywhere near the quality of this saw?
Dang I think I might be sold on it. I saw it was cheaper than the Dewalt currently. I may have to jump on it. Though I'm interested to see what the masterforce is all about. I've seen those for years but there's very little in the way of videos and reviews for that one. Will definitely be cool to see if it does well, seems well built but you never know, looks can be deceiving.
Searching CZcams produced not one video on that Masterforce table saw. Crazy. I also never noticed until this moment that Menards has no customer reviews on the website. I never watch others review vids on tools but I will check the companies website for written customer reviews and common complaints. We're going into this one blind which makes it more fun, IMO. Thanks for watching!!
I’m torn between Bosch GTS15-10 and Dewalt DWE7491RS. Will you be able to do a side by side comparison between the two?
Short answer, possibly. I have multiple vids with that DeWALT which is now back with its owner. That reviewed saw is 10 years old and Im told the newest version has multiple updates. We'll see if I can squeeze it into the budget, after all it definitely gets the views. Thanks for watching!
I love my corded Bosch tools. I call them my poor mans Festool tools lol. Great review as always Mike.
That's pretty hilarious....Ive always thought of Bosch as poor mans Festool also. Thanks for watching Griffin!!
Awesome man as always. I'd love to see the new brushless cordless 20v Hercules double bevel slider if you can get to it
LOL!! Didn't notice that new battery powered saw! Seems everything I get for review gets replaced or bested by something new! Wish they sold it as a kit since I haven't jumped into that battery line yet. Thanks for the heads up!
@@ProjectsForAllReviews Hercules brushless tools are awesome dude you should try them, and batteries are extremely reasonably priced. And the 5-year no questions asked return to the store warranty like Sears in the old days... I'm not saying they're the best but their competitive
On these reviews, how many amps is the circuit you are plugging into? My Skil 6703 is pretty nice but it kicks my 15 amp circuit in almost every cut. I have to tap a 20 amp circuit from the kitchen to get around that.
Great video. Would you be able to tell me the difference between this saw and Bosch 4100xc saw? I have an opportunity to buy a 4100xc on sale. However, I want to buy the best out of the 2 saws. Thank u.
Just note the 4100 series is notorious for motor failures. Generally either the circuit board (for the soft start) or the bearing. I have a 4000 (the model before) and just cooked the motor (after 17 years, in my case, I think it's the field coil). I'm an advanced DIYer but I imagine if this was on a contractor's truck that 17 years would have been much, much sooner. That said, I'm still leaning towards this as the replacement. The other two options would be the Skilsaw SPT99-11 and DeWalt 7491RS.
Thank you for your reply. I feel the same way.
As far as the scale, maybe the are using 25mm per inch rather than 25.4mm and the weird arbor nut for dados might be a cheap way to produce a USA saw WITH dado capability and a second model for the EU without the threaded end of the arbor (no DADO for EU).
That was my assumption too Mike. Thanks for watching!
Dig this review, MIKE!👍👍
Great demo putting this through its paces. This Bosch has ⚾️⚾️’s!!!
⭐️⭐️⭐️⭐️⭐️
Thanks! I really like this saw! It'll be a tough decision between this and the big Skilsaw when making room time comes around. Thanks for watching!
Good jolly, Mike, this looks like a heck of a saw. Now if I could only come up with $650 (sales tax here is crazy); that's about the same as I payed for my cabinet saw years ago. But, I really want to have a saw dedicated to a dado blade that I can move easily. Does it come with the zero clearance throat plate, or the dado throat? I guess made in Taiwan is better than made in China. I'd have to agree on that arbor length and the nut. Good luck, brother. Man, you hogged that out all in one pass, that's impressive. I like the saw, but I'm waiting to see the other saws before I make a choice. It's a bit cheaper than the DeWalt...but I think you can guess how I lean.
Hey Meat! This ones got a lot of good stuff going for it. The throat plates were extra but not too expensive. Just got back from Lowes with the Kobalt saw. With the Masterforce and red Skil should make for a good cheap saw shootout. Maybe we'll do a round of ultra cheaps soon too. The Ryobi is hanging over me like a black cloud, will have to get to it eventually. Thanks for watching!
@@ProjectsForAllReviews Masterforce is a Menard's saw? That's a mid-west thang. Good job, once again, Mike.
👏👏👏
So Mike you've tested quite a few table saws has anyone come close to beating out the DELTA ❓
AND AS FAR AS THE MEASURING scale on the table saw did you replace the original one are how did you adjust it ❓thanks as always appreciate your content very informative and fun to watch 😊
I seriously doubt we'll find a job saw that will make me get rid of the Delta. Every so often I contemplate selling it to make space but I know Id instantly regret it. Truth is I rarely use it anymore since I always have review saws that need testing. Ive sold a few off but still currently have seven table saws in the garage including the Delta. 🤣 I meant to replace the ruler on the big Skilsaw after the review but now I'm glad I didn't since it made a good point in this vid. Thanks for watching!
@@ProjectsForAllReviews
Appreciate your response Mike,
So now excluding the DELTA out of the job site saws "if" you had to pick one which one would it be ❓
@myk1200s The answer might surprise you. Since the Delta stays I’d lean towards small and powerful and would most likely keep the 8 1/4 Skilsaw Wormdrive. Outstanding quality and power. It could be bested by a battery powered saw but time will tell.
@@ProjectsForAllReviews
YAH.. I was impressed by that review also thanks Mike as always have a great day.
So if you had to choose, this saw or the Skilsaw SPT99. Asking for a friend😅
I know a friend in the same boat.
Please would you review the new evolution tablesaw Please thank you
Little bird told me should hopefully be released in the US at the end of the year. I’d be surprised if Evo doesn’t send one over for review. Solid yes on this one. Thanks for watching!
love most of the videos, BUT the audio is sooo low
Some of the older vids definitely had audio issues before I figured it out. This is the first video edited on my new desktop setup without headphones. I'll have to reexamine. Thanks for the heads up and for watching!!
Does look like it's nice, I see guys getting these jobsite saws to save room only to build it into a bench that takes more room then a contractor saw, even cabinets lol never understood that as they will never be as good as either I just mentioned, I've heard Bosh don't work well with common accessories and only use Bosh accessories which is a huge turn off, least that's the case with their routers..
Any outfeed support?
I forget something in every video.....Heres the affiliate link and I added it in the description. amzn.to/3SnmSut Thanks for watching!
I think youre throwing the tape measure off by squishing it with clamps.
Doesn’t matter if it’s clamped or not. I clamped it so you can see it didn’t move. Thanks for watching!
@@ProjectsForAllReviews Its not about moving, its about deforming the tape slightly.
@@evictioncarpentry2628 I hear ya but it’s the same with all of the tapes clamped or not.
Ha. 0:43 I do have an orange cat at home which I do not trust. Sold.
LOL!! That cat is never-ending source of funny pics! Thanks for watching!!
I’m looking to get into woodworking, I want to try to make chairs, small to medium sized tables, and other similar projects, would this be a good table saw to get? Never owned one before
With a price that high, these projects are not for all. 😤
😂
LOL!!! Seems like I'm spending budget table saw money at the grocery store on the weekly. 2-3 visits to Jewel is about the $ equivalent of 1 high end job saw! Thanks for watching!
Lol.. Not even close! The DeWalt took that crown a long time ago!
Skil is now the parent company of Robert Bosch, so it's not a stretch of imagination to see both the Bosch and Skil tapes off to the same degree. Someone mentioned temperature at application. Maybe so. In any case, I never trust those tapes for anything but coarse measures...like if I need an eight inch cut, slide the fence close to 8 while I'm grabbing my tape.
On tape measures: if you start a project with one certain tape, use that specific tape all the way through to completion. There is just enough difference between a DeWalt inch and a Milwaukee inch to give you migraines...just sayin' 😮😢
I agree the ruler on table saws is only on there because it would be weird if there was no ruler. I do however use the ruler on my Delta for non super critical cutting, it's done fine. To my knowledge Chervon bought Skilsaw and Skil from Bosch and that's were the similarities come from. Would have made sense to me for Bosch to change the ruler design to differentiate the new saw from their previous designs that they sold, seems lazy to me. But what do I know? 😂 Thanks for watching!
Sorry, have to correct something here. Bosch used to be the parent company of Skil. However Bosch sold the Skil brand to Chervon, the company that makes Flex, E-Go and some of the Kobalt line, several years ago.
With that much fence dip and the blade waver, did you check the flatness of those rips? I'd be interested in variations.