듀얼 우퍼 스피커 / Dual Woofer Speakers Build

Sdílet
Vložit
  • čas přidán 16. 06. 2022
  • 손님께서 오랫동안 모아놓은 유닛들을 가지고 방문하셨습니다.
    가져오신 미드우퍼가 다른 유닛들과 맞지 않아서 데이톤오디오 유닛으로 대체하였고 저음을 특별히 즐기시는 주문자님께서 들고 오신 12인치 듀얼 우퍼를 장착했습니다.
    감사합니다
  • Věda a technologie

Komentáře • 63

  • @user-gh2uo3qe1x
    @user-gh2uo3qe1x Před 2 lety +4

    영상 기다렸습니다.어마어마하네요.

  • @user-hl2yj6xi6i
    @user-hl2yj6xi6i Před rokem +1

    여기 영상도 잘 보았습니다.
    영상 볼수록 정말 높은 실력가임을 느끼게 됩니다. 또한 상당한 투자가 있어야 되겠다는 생각이 듭니다.
    자작 합판까지! 큰 열정과 집념으로 대성하시기를 기원합니다.

  • @user-fx1cv7kq9x
    @user-fx1cv7kq9x Před rokem +1

    다른말이 뭐가 필요 있겠습니까
    그냥 대단하다는 말밖에. 할말이. 없네요

  • @user-hl2yj6xi6i
    @user-hl2yj6xi6i Před rokem +1

    듀얼 우드 스피커 맘에 많이 와 닿네요. 음질이 풍부해서요.

  • @gordiefrench5342
    @gordiefrench5342 Před rokem +4

    Beautiful pair of speakers

  • @joshuahan538
    @joshuahan538 Před rokem +2

    단연 최고네요!!

  • @user-ub6bn4mh6d
    @user-ub6bn4mh6d Před 2 lety +2

    존경스럽습니다

  • @fabrizioradogna1020
    @fabrizioradogna1020 Před 6 měsíci

    Perfect orchestral loudspeakers!!!😮❤

  • @audacity5690
    @audacity5690 Před 2 lety +6

    허헛.. 이건 뭐 대단하시네요. 혹시 네트워크는 기성품을 사용하셨나요 아니면 직접 따로 제작하시거나 주문하신건가요? 자작 합판 같은데 어떤 두께의 합판을 사용하셨는지 그리고 전체적인 크기도 상당할 것 같은데 사이즈도 궁금합니다. 대단하십니다.

    • @philwoodcraft
      @philwoodcraft  Před 2 lety +6

      모든 부품들은 주문자님께서 가지고 오셨습니다.
      18t합판 사용했고, 1060/400/300입니다
      감사합니다🙂

  • @baekkyounghoon4515
    @baekkyounghoon4515 Před 2 lety +1

    오 똑같이 만들고 싶군요..

  • @Kuuiby
    @Kuuiby Před 2 lety +2

    another masterful work, good friend!
    With that yellow tool can you make the circles very precise to the millimeter?
    What kind of wood and thickness did you use this time? :)

    • @philwoodcraft
      @philwoodcraft  Před 2 lety

      There is a slight error in the product. A circle cutter in the form of a rail is recommended.
      18 mm birch plywood was used.
      Thanks!

  • @mauserkk98
    @mauserkk98 Před 2 lety +2

    Very impressive .

  • @AudioTekAdventures-ph9ke
    @AudioTekAdventures-ph9ke Před 5 měsíci

    really loved seeing the process. I hope you are able to do more like this Thanks for all your hard work😀

  • @bentleygt3716
    @bentleygt3716 Před 2 měsíci +1

    GREAT Work. it's better than watching an Action Movie .
    i have not watched ALL your Videos. i'm just wondering if you have done an Open Baffle Speakers ??.

    • @philwoodcraft
      @philwoodcraft  Před 2 měsíci

      Thank you for watching. I've never made an open baffle speakers.

  • @user-my1yf1lw7d
    @user-my1yf1lw7d Před 4 měsíci

    우퍼2발 중역 고역 분리형 스피커통 스케일감있는 넓은대역 소리가 좋아보입니다
    부족한점은 청음하면서 수정 하면 될껏같네요^^

    • @philwoodcraft
      @philwoodcraft  Před 4 měsíci

      특성이 완전히 다른 두개의 우퍼라서 수정은 힘듭니다. 주문자분께서 가지고 오신데로 제작해 드렸습니다ㅠㅠ

  • @mungsm
    @mungsm Před měsícem

    하....... 두터운 양감 느낌 전면덕트가 좋더라고요 저는

  • @ludovicthomas630
    @ludovicthomas630 Před měsícem +1

    Magnifique

  • @dufryve
    @dufryve Před rokem

    Do you have à plan for thèse speakers. Théo look vert great pretty.thank you

  • @user-ct3gg8cs5v
    @user-ct3gg8cs5v Před 8 měsíci

    좋네요.
    공방이 어딘가요?

  • @luischaveseletricista7074

    Olá, em relação ao projeto da caixa acústica, o que é levado em consideração se há 2 alto-falantes de características diferentes instalados em uma só câmara?

    • @philwoodcraft
      @philwoodcraft  Před rokem

      It was made according to the order's request.
      The translation is difficult. Is it possible in English?

    • @luischaveseletricista7074
      @luischaveseletricista7074 Před rokem

      @@philwoodcraft Hello, regarding the design of the loudspeaker, what is taken into account if there are 2 loudspeakers of different characteristics installed in a single chamber

    • @philwoodcraft
      @philwoodcraft  Před rokem +1

      In general, it is right to use the same parts.
      It was made at the request of the orderer. I don't know what to consider.

  • @infinytower3317
    @infinytower3317 Před 4 měsíci

    자작합판 18T의 견고함과 아름다움이 돋보이는 자작 스피커인데 일부 마구리면 (end-grain)에 톱날에 탄 자국도 보이고 … 그런게 걸립니다만.. 열압착 에지 밴딩이나 하드메이플 덧대기 정도를 하면 해결될 것 같네요. 내부에 음향반사 배플 (baffle)이 추가되면 음질이 향상될 것 같기도 합니다. 잘 보았습니다.

    • @philwoodcraft
      @philwoodcraft  Před 4 měsíci

      횡절기가 있으면 원장자르기가 수월하겠죠. 실력탓이겠지만 작은 테이블쏘의 한계인거 같습니다.
      주문자분께서 가지고 오신 완전히 다른 스펙의 우퍼조합이고... 인수해가셔서 더 들어볼수도 없었습니다.
      의견도 남겨주시고 관심있게 봐주셔서 감사합니다!!

  • @arcyoon
    @arcyoon Před 3 měsíci +1

    우퍼 하나는 뒤로 돌렸으면 ...더 엄청나지 않았을까하는 궁금증이 생기네요;;.....

  • @adam.insanoff
    @adam.insanoff Před 9 měsíci

    4:05 That 25 W is louder than anything today.

  • @jayrana5225
    @jayrana5225 Před rokem +1

    Can you make 12inch subwoofer box *2 for me??

  • @westelaudio943
    @westelaudio943 Před rokem

    Pioneer speaker from 1974 but what is the other one (woofer)?

  • @user-zn6tc4is1p
    @user-zn6tc4is1p Před 2 lety +2

    큰게 여유롭고 깊고 조우네요ᆢ

  • @user-el5px6sx2m
    @user-el5px6sx2m Před 8 měsíci +1

    소리가 좋아요 판매도 하나요?

    • @philwoodcraft
      @philwoodcraft  Před 8 měsíci

      상담을 통해 원하시는 대로 제작 해드립니다.

  • @Adrian-hb6uz
    @Adrian-hb6uz Před 2 lety +2

    어쿠스틱스와 특성임피던스에대한 이해가 더 필요해 보입니다

  • @user-py2co4ev5l
    @user-py2co4ev5l Před 2 lety +1

    👍👏👍👏👍👏

  • @user-of7dt7cz1v
    @user-of7dt7cz1v Před rokem +1

    유닛은 뭔가요?

    • @philwoodcraft
      @philwoodcraft  Před rokem

      주문자께서 가지고 오셨고요. 영상 중간에 유닛 소개있습니다.

  • @jungkookjoo6259
    @jungkookjoo6259 Před rokem +1

    옮겨 심기인데. 기존 스피커가 어떤건지?

    • @philwoodcraft
      @philwoodcraft  Před rokem

      주문자께서 모아오신 부품들에 미드만 별도로 매칭해드렸습니다.

  • @arieldiazdevaldesm5999
    @arieldiazdevaldesm5999 Před rokem +1

    hi is possible i know were buy the yamaha ns1000m serie 27190 who its ? amplificador our crossover thank you for answers

    • @philwoodcraft
      @philwoodcraft  Před rokem

      The client provided it. He didn't buy it either, he got it from someone.

  • @user-sp1gz5yq7v
    @user-sp1gz5yq7v Před rokem

    좀 문제있지 않아요??

    • @philwoodcraft
      @philwoodcraft  Před rokem

      손님의 요청으로 직접 가지고 오신 부품으로 제작한 제품입니다.