Alright ladies and gentlemen on this one we will be doing the testing of the LD 100 bike going to do the jetting and get it jetted thank you so much for watching and like ,subscribe and please leave me a comment.
The roads down here are real rough and the sides of the roads are rougher so you're kind of limited on where you're going to do a speed run or a fast run thank you very much for watching brother and you ride safe
🤣🤣 Many Smiles Great Video, CO-LAB is Locked In People 👽👍🏻 Finally Actual Footage for the Community on The Smolik Timing Plate, Made in America 🚴♂🚴💥☁☁☁☁
@@KevinTodd im excited to see that also I've always wondered about those adjustable thunderbolt or Jaguar cdi's, have u seen those? Another quick question if u dont mind,this is the first time I've ran a reed and idk if it may just be that but u told me to try an nt carb the other day when i was having issues with another carb and that totally worked but my question is, when the engine gets to a certain rpm, about half throttle the pitch/ sound of the engine changes/ gets quieter and sounds that way until it drops in rpms again. Is that healthy? It feels and otherwise sounds like its running good🤷♂️ i tried researching it but didnt find nothing good. Thanks for ur videos and good info🤙i hope ur ac replacement goes smoothly dude.
Well I got a LD 90 that goes faster than that..... porting on the engine is bad and hopefully it'll do better with some different timing you ride safe and thank you very much for watching
Way less pinging on test 3. Probably fastest ld on planet 🌏. Seems plenty fast to get hurt on. Great job. Way more enjoyable seeing you improving engines as opposed to buying pre made cyls and acting like you get credit for how it runs. Hope that makes sence. Kevin's shop for president 2024
Thank you for watching big daddy I hope you're doing really well and do you think timing will have any effect just wondering you have a great day and you stay safe
@@KevinTodd 100% timing would improve any and all of these 2 strokes. Regardless of what cyl or motor combo. Key is a programmable ignition. That you can program a timing curve everyone would pick up litterly 2 + hp if it's a high end cyl possibly as much as 4 hp. Not cheap and requires a crank trigger and battery. You pick up power everywhere. That's how we tune drag bikes.
Very fast world's fastest LD 💯?? Okay I &I got a video for you. Nice speed wicked stay tuned for my LD in action full video no shorts video. The shop looking nice as you were
Looks awesome brother I liked the ld100 I ride around 30to35 all day anyway the nel lusso my first build it has a yd100 on it now thinking about putting on the LD90 on it. PS called you left you a message that's what's wrong with the athina I rode it around for a week and a half with the window no problem the 12 coil was dieing that's why I was able to go about a mile and it would cut out I ran it by op1zill he said he never heard anything about it then I told him what little evil said and he said that the athina engine needs a parmacat cdi that allows you to control the timing and also one of them smolik timing plates for the magneto I found one on line 19 dollars but not as nice as smolik so I guess I'm at a stop until I get them parts evil was saying that's what is killing my coils just letting you know what's happening later
I said it needs timing turned back, an it was not loosing power because of high compression 👽👍🏻 But Heat will kill your coil an magneto, if you want to go all in get the Parmakit it has a built in timing Curve an you can use in along side the Smolik timing plate - But the Plate should fix Your issue Mike
@@mikemiller3303 An did you open up the skirt where mix come in because the the spacer plate in place it also restricts the Flow Mix Coming in Brother 👽👍🏻
@@Op1zilla yes sir I did do that that's why I don't understand op1zill it's got around 225 miles on the engine then I was going down the road slowed down to about 15mph and it started to flame out so I help pedal it and it will start up when I got home I thought the same thing why to put temperature gun on it the engine is 245 cylinder 150 nothing to hot when I was breaking it in it got up to 280 degrees and ran fine then I changed the coil to another 12V coil did good for 2 miles and was 232 degrees no spark so I went home been sitting every since plus it got cold here again lol
Cool, I was curious about how exactly those timing plates worked.... I have 2 timing lights laying around....Makes me wonder if you could make some timing marks on the coil & magnet & use timing light to label exactly how many degrees btc you are. Hook timing light to car battery next to bike then clamp light onto sparkplug wire.
Well I'm going to do a full video on installing the plate and using it you have to thank Op1-zilla for letting me use it and thank you very much for watching ride safe
Feels like the air fuel mixture is good we're going to try some timing adjustments with that timing plate and see what that does thanks for watching brother thanks for the info and you ride safe
Just some friendly competitiont for you, I'm in the process of building one of these motors myself and I'm coming for your top speed run, I'm going to be using a 24 inch wheel bike with a 22 tooth sprocket
@KevinTodd it's not like you would think. The bottles are real small so when you press the button it only lasts about 6 seconds or so. If I'm riding that bike I usually put a few extra bottles in my pocket just in case I need them lol
I live about 25 miles from New Orleans so we're at sea level and it's flat no hills or anything like that dead flat thanks for watching brother and you ride safe
How about more info? My ld100 only hits 40mph. Just want some tips. My rig is simple, ld100 high comp head,2mm spacer,decked to. 7,homemade window,g2 reed, mz clone soon to be real mz65, stock nt. Is it the carb? Do i need to step up?
czcams.com/video/jtTkQrSNt1s/video.htmlsi=rp9Nh_x9d2vrydQH When you look at this video go to 15:23 and look at the piston I did the same thing on the LD100 hear is a link to carb and reed valve set up. www.amazon.com/JXMOTO-Carburetor-Universal-Motocross-Motorcycle/dp/B0B1M2XHP3/ref=sr_1_1_sspa?crid=3MO7TZ6UUNI7M&dib=eyJ2IjoiMSJ9.qaFJvltJEhtWypkmSLJ2aKdvvIJEbFEz0dJzps23ev-XOVvW8tIgLF7Ex8VcpsfT4NlEIt8Zm9TKkJhv1QkLS8sZwpYoNoi-uJG9NspiEz79SvCxHWjp7HbFpN2mBVyuffGp23-GUXv9d9gpaMSQsLfrp8QpApNfi7jkL8Lh_U7Eqk6eNhYsHEwi_OKE-tjI1hTanjK1NAUCS2BfCAMvGwYid7Op93EldEyAYWvRljSwYTogAl5wRHDnvYkq7OCeQWaWps7rJldCITRp6_GZwiP4w0pWIY-qjB8dO7Kr1nM.B-Oh5SVCWbBQiIn_la84MXkaNkaK6mO30YsFrW9FX1Q&dib_tag=se&keywords=21mm%2Bcarburetor%2Bfor%2B2%2Bstroke&qid=1723733021&sprefix=21%2Bmm%2Bcarb%2Caps%2C121&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1 www.amazon.com/Miaowa-Racing-Intake-Motorized-Bicycle/dp/B098X32Y9P/ref=sr_1_6?crid=1GDPJY2L02ZJ3&dib=eyJ2IjoiMSJ9.PjBqT3-ZEMdcrz1nJgoeJb-NyfSefqMOOd67OrGbWSk6LvwX0sEnGYnrMWQahADywcpe6hNGO5_VAET51lsM6tFmRlMcKv25KIoMTI63938ANlRRLJln-PNGeAmFq8cob4k9vJY-iKgi9MjXIeqKlNJnmlnesyomlDxIYvfsUNy7bUARuqEpUJHndWZJs2XEi10qYXY8UXECiTTZdlKAunZe0BiW6SnwP5qf1BjcMTXJW68o7Pg4xdMkC70PNRzWufjBaxIamwIoWtCpcSb5xRuiUWVlmWMvpOtSmPFkDW0.1EYhrM9KXFRoxS7U7bagpxwVQONNleqg3MyexRj13F8&dib_tag=se&keywords=g2+reed+valve+for+motorized+bicycle&qid=1723733086&sprefix=G2+reed%2Caps%2C134&sr=8-6 The carb has jets and comes with 100 main and piolet jet installed in the carb you just bolt it on and now all this information is for entertainment purposes only do not do anything to your engine that could cause you to get hurt 40 miles an hour it's fast enough as long as you got disc brakes a proper frame proper wheels proper tires stuff like that this is just for entertainment purposes only have fun ride safe
Fastest LD100 on the planet. Kevin #1
Yeah you right ERT but that's not saying that much this is not a good motor
Your shop is every mans dream. You got all the bells and whistles.
Wow, much respect. I was scared watching you hit those speeds. I get very nervous going over 30.
The roads down here are real rough and the sides of the roads are rougher so you're kind of limited on where you're going to do a speed run or a fast run thank you very much for watching brother and you ride safe
Humming along nicely. Thanks for sharing the info you used for the runs.
Thank you for watching brother I feel as though it may be some different timing it's going to do better we'll just have to see you ride safe
Thanks for sharing Kevin. It is surely Quik. ⚙️🚲⚙️💥💨💨💨💨💨
Thank you for watching brother I feel as though it may be with some different timing it's going to do better we'll just have to see you ride safe
Very nice kevin ld100 did pretty good thanks for sharing ride safe
Thank you for watching brother I feel as though with some different timing it's going to do better we'll just have to see you ride safe
🤣🤣 Many Smiles Great Video, CO-LAB is Locked In People 👽👍🏻 Finally Actual Footage for the Community on The Smolik Timing Plate, Made in America 🚴♂🚴💥☁☁☁☁
Yes it is we'll be making a nice little engine thanks for watching brother and we're going to do a full video on that timing plate ride safe brother
@@KevinTodd Kevin's Shop #1 👽👍🏻
Nice ride! Your garage is awesome. Thanks for the ride.
thank you very much brother and thank you for watching
Thanks Kevin! Looking forward to part 2 😎👍
Thank you very much for watching and yes Part 2 is going to be good and you ride safe out there
OMG! Looks good & sounds awesome !!
Just wow!!!🤯i think u nailed it. I've not seen another ld100 run like that🤙
Thank you for watching brother I feel as though it may be with some different timing it's going to do better we'll just have to see you ride safe
@@KevinTodd im excited to see that also I've always wondered about those adjustable thunderbolt or Jaguar cdi's, have u seen those? Another quick question if u dont mind,this is the first time I've ran a reed and idk if it may just be that but u told me to try an nt carb the other day when i was having issues with another carb and that totally worked but my question is, when the engine gets to a certain rpm, about half throttle the pitch/ sound of the engine changes/ gets quieter and sounds that way until it drops in rpms again. Is that healthy? It feels and otherwise sounds like its running good🤷♂️ i tried researching it but didnt find nothing good. Thanks for ur videos and good info🤙i hope ur ac replacement goes smoothly dude.
Good looking bike. You made me doubt that engine, lol.
Well I got a LD 90 that goes faster than that..... porting on the engine is bad and hopefully it'll do better with some different timing you ride safe and thank you very much for watching
The gold headset looks sweet
Thank you very much brother ride safe
🍿🍿
You like the show ERT I hope so brother you ride safe
That was pretty fast forty six
Thank you for watching brother I feel as though it may be with some different timing it's going to do better we'll just have to see you ride safe
Faster than I want to go on a bike lol good work as always👍
Thank you very much brother it wasn't that bad but the side of the road was that badride safe big daddy
Way less pinging on test 3. Probably fastest ld on planet 🌏. Seems plenty fast to get hurt on. Great job. Way more enjoyable seeing you improving engines as opposed to buying pre made cyls and acting like you get credit for how it runs. Hope that makes sence. Kevin's shop for president 2024
Thank you for watching big daddy I hope you're doing really well and do you think timing will have any effect just wondering you have a great day and you stay safe
@@KevinTodd 100% timing would improve any and all of these 2 strokes. Regardless of what cyl or motor combo. Key is a programmable ignition. That you can program a timing curve everyone would pick up litterly 2 + hp if it's a high end cyl possibly as much as 4 hp. Not cheap and requires a crank trigger and battery. You pick up power everywhere. That's how we tune drag bikes.
OK Then, Good Job...
Thank you for watching brother I feel as though it may be with some different timing it's going to do better we'll just have to see you ride safe
That's a YD100 bottom end with a LD100 top cylinder head setup
Yes a yard dog 100 bottom with a load of dung cylinder thanks for watching brother you ride safe
Wow awesome speeds 💪 you've got me beat by 1mph but my engine is a little smaller with 49mm bore. The ending was priceless😂
Thank you for watching brother I feel as though it may be with some different timing it's going to do better we'll just have to see you ride safe
Fast and she can take some bumps😊
DAUMN!!!
Thank you very much for watching brother
New bike Mr Kevin?
Very fast world's fastest LD 💯?? Okay I &I got a video for you. Nice speed wicked stay tuned for my LD in action full video no shorts video. The shop looking nice as you were
Keven has a Part 2, Will The Timing Plate Make Steam 👽👍
Thank you for watching brother I feel as though it may be with some different timing it's going to do better we'll just have to see you ride safe
@@KevinTodd It should help, showing the difference or if an engine needs one, most probably do, , Makes for Great Video to Watch 👽👍
@@KevinTodd yes man U got skills I &I know you will have it flying. As you were
Looks awesome brother I liked the ld100 I ride around 30to35 all day anyway the nel lusso my first build it has a yd100 on it now thinking about putting on the LD90 on it. PS called you left you a message that's what's wrong with the athina I rode it around for a week and a half with the window no problem the 12 coil was dieing that's why I was able to go about a mile and it would cut out I ran it by op1zill he said he never heard anything about it then I told him what little evil said and he said that the athina engine needs a parmacat cdi that allows you to control the timing and also one of them smolik timing plates for the magneto I found one on line 19 dollars but not as nice as smolik so I guess I'm at a stop until I get them parts evil was saying that's what is killing my coils just letting you know what's happening later
I said it needs timing turned back, an it was not loosing power because of high compression 👽👍🏻 But Heat will kill your coil an magneto, if you want to go all in get the Parmakit it has a built in timing Curve an you can use in along side the Smolik timing plate - But the Plate should fix Your issue Mike
@@Op1zilla that's what I was trying to explain to Kevin brother that's why I said I'm at a standstill on the athina cause I don't want to mess it up
@@mikemiller3303 An did you open up the skirt where mix come in because the the spacer plate in place it also restricts the Flow Mix Coming in Brother 👽👍🏻
@@Op1zilla yes sir I did do that that's why I don't understand op1zill it's got around 225 miles on the engine then I was going down the road slowed down to about 15mph and it started to flame out so I help pedal it and it will start up when I got home I thought the same thing why to put temperature gun on it the engine is 245 cylinder 150 nothing to hot when I was breaking it in it got up to 280 degrees and ran fine then I changed the coil to another 12V coil did good for 2 miles and was 232 degrees no spark so I went home been sitting every since plus it got cold here again lol
Cool, I was curious about how exactly those timing plates worked....
I have 2 timing lights laying around....Makes me wonder if you could make some timing marks on the coil & magnet & use timing light to label exactly how many degrees btc you are.
Hook timing light to car battery next to bike then clamp light onto sparkplug wire.
Well I'm going to do a full video on installing the plate and using it you have to thank Op1-zilla for letting me use it and thank you very much for watching ride safe
Maybe try vm22 carb maybe if you can get more air maybe run bigger jets
Feels like the air fuel mixture is good we're going to try some timing adjustments with that timing plate and see what that does thanks for watching brother thanks for the info and you ride safe
Bikes falling from the ceiling 😂
Thank you for watching brother I feel as though it may be with some different timing it's going to do better we'll just have to see you ride safe
Just some friendly competitiont for you, I'm in the process of building one of these motors myself and I'm coming for your top speed run, I'm going to be using a 24 inch wheel bike with a 22 tooth sprocket
Well I wish you all the luck in the world but first of all do it safe thanks so much for watching brother and I'll say it again do it safe
Where'd you get a 22 tooth sprocket from
Put a nitrous kit on it like I did. It still runs great but not as fast as my phantom
yeah you're right it probably pick up speed but don't want to use power adders like that thanks for watching brother ride safe
@KevinTodd it's not like you would think. The bottles are real small so when you press the button it only lasts about 6 seconds or so. If I'm riding that bike I usually put a few extra bottles in my pocket just in case I need them lol
What's the elevation of your testing grounds?
I live about 25 miles from New Orleans so we're at sea level and it's flat no hills or anything like that dead flat thanks for watching brother and you ride safe
@@KevinTodd sorry if I repeat questions. Some brain injury momento movie crap
How about more info? My ld100 only hits 40mph. Just want some tips. My rig is simple, ld100 high comp head,2mm spacer,decked to. 7,homemade window,g2 reed, mz clone soon to be real mz65, stock nt. Is it the carb? Do i need to step up?
czcams.com/video/jtTkQrSNt1s/video.htmlsi=rp9Nh_x9d2vrydQH
When you look at this video go to 15:23 and look at the piston I did the same thing on the LD100 hear is a link to carb and reed valve set up.
www.amazon.com/JXMOTO-Carburetor-Universal-Motocross-Motorcycle/dp/B0B1M2XHP3/ref=sr_1_1_sspa?crid=3MO7TZ6UUNI7M&dib=eyJ2IjoiMSJ9.qaFJvltJEhtWypkmSLJ2aKdvvIJEbFEz0dJzps23ev-XOVvW8tIgLF7Ex8VcpsfT4NlEIt8Zm9TKkJhv1QkLS8sZwpYoNoi-uJG9NspiEz79SvCxHWjp7HbFpN2mBVyuffGp23-GUXv9d9gpaMSQsLfrp8QpApNfi7jkL8Lh_U7Eqk6eNhYsHEwi_OKE-tjI1hTanjK1NAUCS2BfCAMvGwYid7Op93EldEyAYWvRljSwYTogAl5wRHDnvYkq7OCeQWaWps7rJldCITRp6_GZwiP4w0pWIY-qjB8dO7Kr1nM.B-Oh5SVCWbBQiIn_la84MXkaNkaK6mO30YsFrW9FX1Q&dib_tag=se&keywords=21mm%2Bcarburetor%2Bfor%2B2%2Bstroke&qid=1723733021&sprefix=21%2Bmm%2Bcarb%2Caps%2C121&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1
www.amazon.com/Miaowa-Racing-Intake-Motorized-Bicycle/dp/B098X32Y9P/ref=sr_1_6?crid=1GDPJY2L02ZJ3&dib=eyJ2IjoiMSJ9.PjBqT3-ZEMdcrz1nJgoeJb-NyfSefqMOOd67OrGbWSk6LvwX0sEnGYnrMWQahADywcpe6hNGO5_VAET51lsM6tFmRlMcKv25KIoMTI63938ANlRRLJln-PNGeAmFq8cob4k9vJY-iKgi9MjXIeqKlNJnmlnesyomlDxIYvfsUNy7bUARuqEpUJHndWZJs2XEi10qYXY8UXECiTTZdlKAunZe0BiW6SnwP5qf1BjcMTXJW68o7Pg4xdMkC70PNRzWufjBaxIamwIoWtCpcSb5xRuiUWVlmWMvpOtSmPFkDW0.1EYhrM9KXFRoxS7U7bagpxwVQONNleqg3MyexRj13F8&dib_tag=se&keywords=g2+reed+valve+for+motorized+bicycle&qid=1723733086&sprefix=G2+reed%2Caps%2C134&sr=8-6
The carb has jets and comes with 100 main and piolet jet installed in the carb you just bolt it on
and now all this information is for entertainment purposes only do not do anything to your engine that could cause you to get hurt 40 miles an hour it's fast enough as long as you got disc brakes a proper frame proper wheels proper tires stuff like that this is just for entertainment purposes only have fun ride safe
@@KevinTodd thanks alot man. Been at it for a while sound advice really appreciate the links and such. You earned a like n sub.
World's fastest? ,🤣 phantom does 50 mph stock out the box
I think it said world's fastest LD 100 and not phantom hello
@@KevinTodd take it easy bro 😂😂😂