Cold starts are the best moment of the day.... I sometimes put my GC8 Impreza in front of the garage to let it completely freeze up, start it on a Sunday morning, let it warm a bit a go for just a useless drive.... :) A very useful tip : when you work under the bonnet, use one of them silicon parts tray to place ratchets, screwdrivers and small parts on. Never let tools dwarf around the engine bay, they could be the start of a catastrophic damage.....
PICKING UP A ABANDONED SIERRA RS COSWORTH czcams.com/video/xERh-rHxRrk/video.html CLEANING A ABANDONED SIERRA SAPPHIRE RS COSWORTH czcams.com/video/7rwElGfQkK8/video.html
Brilliant video Adam. Car looks amazing and I'll sleep better knowing the paintwork under the wiper mechanism is cleaned and polished (even though no one will ever see it!). Top job!
theres a place in Boro that rebuild alternators, starter motors etc....They are called Teesside start parts. Well worth a try, or a look for somewhere nearer that does alternator rebuilds. Just had one done for a civic type r, think it cost £60.....had loads done over the years......works mint.....never had a problem from them.
Nice work & excellent attention to detail, cleaning / painting & those new bolts make such a difference, great fix on the handbrake. Tip, Silicone spray ( Screwfix or halfords ) is good for lubrication without been oily, also great for rejuvenating / protecting any rubber / plastic parts, gaiters, seals etc.
Another great video! In case no one else has said it, if it’s only the last letter that different on the part number then it’s probably the same part but just an earlier or later version. Earlier in the alphabet is an early part and later is a later part. It’s the part of the part number that changes with supercessions. 👍🏻
Wee tip when putting wheel nuts or bolts on start at 12 o'clock then 6 then 9 then 3 same with torquing them this will make sure the wheel is going on flush 👍
A bit of silicone spray would be better for those rubbers the engine oil will make them deteriorate and swell, clean them and redo it nice work mate love your ocd for detail 💪💪💪
Don’t use oil on rubber parts mate, it’ll turn them to slime over time. You can use washing up liquid as lube for installing rubber bushes and grommets. That’s what I was advised years ago anyway 😅
Great content, got my fuel tank from Sierra R Us, trying to finish mine off XR4x4, using a 24v V6 Cosworth twin turbo out of the Granada Scorpio, great work thumbs up, 👍👍👍👍👍👍👌👌👌👌👌👌
Top work Adam. Loving this project. Do you live near a hospital or police station or something? There seems to be sirens in the background in a lot of your videos (Not a complaint or a problem, just an observation).
Awesome work. Love this series! All you need for that pin on the handbrake cable is a "clevis pin" and split pin to secure it. Saves you some money, and can be had easy online or in motor factors. *Edit* just saw you got a pin!
Boot lock from memory is same as my 4 escort/ Orion Wiper motor should have greased it rather than oil , the oil can break down plastic and rubber items
tbh any part would do if it looks like it in every way it's all gd :) when parts get super rare everyone would be glad to just see the brand name ford sierra on it lol
Adam it's coming along nicely mate 👌. Can't wait to see it on the road and esp down at Paul's 😎.. I'm off to knockhill racetrack this sun 25th for the big Ford fair 😀. Defo see a load of old skool ford's . Tack care mate and keep the vids coming 👍😀
Had to sell my dream a5 due to being skint and having a baby but I loved going into deep cleaning like behind the wiper motor like you have carnt wait to get a new a5 some day to do it all again
Mate defo been my fav car and to be honest this is my dream car and watching u bring her bk to life mate is hugely inspiring to me. Keep it up the good work mate really enjoy it and ur journey. Many thanks from the sunny South 😎. Sid
The same thing happens during your video Every single time you use your trolley jack. My dog will be flat out asleep on the living room floor then the squeak from your trolley jack has him running round wondering what the noise is 🤣🤣🤣🤣🤣🤣
🌏 Get Exclusive NordVPN deal here ➼ nordvpn.com/adamsmith using code AdamSmith
It's risk-free with Nord's 30-day money-back guarantee! ✌
Can’t beat someone who has passion for what they do ! Makes watching even better ! Top work pal
Cold starts are the best moment of the day.... I sometimes put my GC8 Impreza in front of the garage to let it completely freeze up, start it on a Sunday morning, let it warm a bit a go for just a useless drive.... :)
A very useful tip : when you work under the bonnet, use one of them silicon parts tray to place ratchets, screwdrivers and small parts on.
Never let tools dwarf around the engine bay, they could be the start of a catastrophic damage.....
PICKING UP A ABANDONED SIERRA RS COSWORTH
czcams.com/video/xERh-rHxRrk/video.html
CLEANING A ABANDONED SIERRA SAPPHIRE RS COSWORTH
czcams.com/video/7rwElGfQkK8/video.html
Been watching this since the start. It’s looking great.. ps. Changed days now from adjusting the wiper arm to cover the road tax disc 😉
Lol yeah I forgot we used to do that. 😂😂😂
@@SofaSpud_ you know it 😂😂
Gotta be mot and donut time soon Mind.
Well, about that!!
Wait till the next video 🙈
Morning Adam....Good to see a Sunday morning video mate 🙂👍
Morning fella 😊👍🏼
Sandblasting is so therapeutic 😁😁
Fun Fact: a 6 dial MKI Escort dash insert fitted nicely in the bottom of a cheap cantilever toolbox.
I miss those trips to the scrappies 😋
Love watching your videos Adam. So impressive to see how you're bringing this car back to such a lovely standard 👍
Thanks Jamie 😊👍🏼
Miss ur videos rs jamie 😢
Have to be honest Adam , your paint booth looks a lot like a garden shed 😂
Yeah. It's designed to blend in with a traditional British garden Phil. 😊👍🏼
@@Adam151082 🤣
You just can't help but be inspired by Adam's friendly nature and enthusiasm. I'm loving watching him get his Saph back on the road. Respect bro👍
Brilliant video Adam. Car looks amazing and I'll sleep better knowing the paintwork under the wiper mechanism is cleaned and polished (even though no one will ever see it!).
Top job!
It’s always weirdly satisfying shot blasting stuff
There’s a Saphire Cosworth listed as breaking on eBay at the moment, advert is for a boot lid and has a lock fitted to it
theres a place in Boro that rebuild alternators, starter motors etc....They are called Teesside start parts. Well worth a try, or a look for somewhere nearer that does alternator rebuilds.
Just had one done for a civic type r, think it cost £60.....had loads done over the years......works mint.....never had a problem from them.
The best lubricant for rubber is brake fluid as callipers and have rubbers in them or red rubber grease. Oil will eat rubber.
How’s your daughter and lass doing Adam , haven’t seen them in the vids for a while hope all is well
This is a dream garage 😍 you must have the biggest smile every time you open they garage doors 😁👌🏻
Yeah. I feel very lucky Michael 🙂
Nice work & excellent attention to detail, cleaning / painting & those new bolts make such a difference, great fix on the handbrake. Tip, Silicone spray ( Screwfix or halfords ) is good for lubrication without been oily, also great for rejuvenating / protecting any rubber / plastic parts, gaiters, seals etc.
Another great video!
In case no one else has said it, if it’s only the last letter that different on the part number then it’s probably the same part but just an earlier or later version. Earlier in the alphabet is an early part and later is a later part. It’s the part of the part number that changes with supercessions. 👍🏻
Wee tip when putting wheel nuts or bolts on start at 12 o'clock then 6 then 9 then 3 same with torquing them this will make sure the wheel is going on flush 👍
Another great video on the cos worth , love the fact that every removed part gets restored and body gets cleaned , great job 👍👍
cool vid mate. I'd love a sand-blasting booth. The amount of stuff on my mk2 polo that needs sanding down and spraying is unreal 😂
Mint all these little things makes it looks loads better
Mate your channel is getting better an better love it
A bit of silicone spray would be better for those rubbers the engine oil will make them deteriorate and swell, clean them and redo it nice work mate love your ocd for detail 💪💪💪
Morning
Morning fella
Don’t use oil on rubber parts mate, it’ll turn them to slime over time. You can use washing up liquid as lube for installing rubber bushes and grommets. That’s what I was advised years ago anyway 😅
AF is aw feck and AB is aw bollox. Things usually said when fixing old cars 😂
Coming along nicely, i love cleaning things up and replacing all those niggly broken bits, even if you can’t see them, lifts the car massively 👍🏻👏🏻
Cant wait to see it mot'd and a vid of it out n about 😎
Did you need a handbrake switch on the new handbrake assembly? This would be for the light on the dash showing the handbrake was on.
Good work Adam, going to be a lovely car when finished, great to see your motivation !!
Nice video adam its all the small details what makes the big difference looking good that cossie
Love your videos Adam so passionate in every detail the cossy is looking amazing keep up the great work really great watching 👍👍
Love this channel
A very interesting video well done best of luck with the progress of the car 👍👍
Looks like someone’s been watching Matt Armstrong… 😂
I watch everyone on CZcams car related but must admit your my favourite and this project I loving ❤️ keep the videos coming pal.
Another great item 👍
Great content, got my fuel tank from Sierra R Us, trying to finish mine off XR4x4, using a 24v V6 Cosworth twin turbo out of the Granada Scorpio, great work thumbs up, 👍👍👍👍👍👍👌👌👌👌👌👌
What spray you use for the black grill?
It's coming together nicely and already looking a million dollars! Thumbs up!
12:31 Personally I would have sprayed the scuttle black or treated the plastic with some Gtechniq C4 to match the the wiper arms.
Like how you put new bolts on everything!😊👍
Use silicone spray instead of engine oil on rubbers and plastic parts as the engine oil will destroy the rubber and plastic sockets in wiper arms
Adam them Lucas alternators normally only need a regulator.
Top work Adam. Loving this project.
Do you live near a hospital or police station or something? There seems to be sirens in the background in a lot of your videos (Not a complaint or a problem, just an observation).
Awesome work. Love this series! All you need for that pin on the handbrake cable is a "clevis pin" and split pin to secure it. Saves you some money, and can be had easy online or in motor factors.
*Edit* just saw you got a pin!
Love this series. Has motivated me to buy a V1 impreza wrx which needs tlc.
Etch primer on bare metal before paint. 😎
Etch primer first and no gloss black on any Ford parts it's Satin black. Gloss looks pants.
Always gives me a bit of motivation to get my own cars sorted when I watch these Adam 👌🏻
Do it Thomas😊👍🏼
Me too pal 👍
Slowly but surely getting the Saff up to top condition. Keep up the good work Adam 🔧
Great vid again ,one of the only channels I don’t skip any of the video keep up the good work 👍🏻
Love your attention to details mate the wiper most people would just leave .. gunna be a beauty when it's all di e bud keep it up love the vids
Its looking great adam,its getting there now.your attention to detail is spot on.look forward to the next one.👍
Cossie is coming on good Adam love the channel mate keep up the good work 👍🏽
I really enjoy your videos, just one thing, the reversing lights don't seem to be working on your Sapphire
Great job on that refurb looks like new again. 😎
Your doing well with the cars Adam 👍.
Hi Adam, the cosworth 4 door is looking grand 👌
Boot lock from memory is same as my 4 escort/ Orion
Wiper motor should have greased it rather than oil , the oil can break down plastic and rubber items
Soon be time for some Spender film locations with the saff.
"Aye.....its a beast"
Great videos Where did you get the zinc bolts
Legend, love these videos. Started watching from the sapphire and I’m hooked
tbh any part would do if it looks like it in every way it's all gd :) when parts get super rare everyone would be glad to just see the brand name ford sierra on it lol
just brilliant to watch 👌🏽👌🏽👌🏽✌🏽✌🏽👊🏽👊🏽👍🏽👍🏽love the motors
Thanks Mohammed 😊👍🏼
Adam please get rid of those boy racer samco blue hoses and replace with factory black pipework .Ive n
I
Adam it's coming along nicely mate 👌. Can't wait to see it on the road and esp down at Paul's 😎.. I'm off to knockhill racetrack this sun 25th for the big Ford fair 😀. Defo see a load of old skool ford's . Tack care mate and keep the vids coming 👍😀
Coming along nicely mate 👌
I missed this vid, nice, love the way you make everything propa mint, did the same to my e36. Love it
adam if you make any mistakes its your car aand you have done a great job on keeping those two nostalgic classics alive and well
Thanks Chris
your welcome keep it up
Keep them coming Adam , I love your videos .
This car is looking good now, well done Adam 😊.
Had to sell my dream a5 due to being skint and having a baby but I loved going into deep cleaning like behind the wiper motor like you have carnt wait to get a new a5 some day to do it all again
Lookin good Adam 👍..love how much detail you put in your cars for them to be mint 😀
Thanks Tony
Really good job Adam taking some work pal your doing car proud my man keep videos coming mate your doing brilliant mate great watch 10/10 my friend
Thanks Leslie
Wheels need a refurb
Mate defo been my fav car and to be honest this is my dream car and watching u bring her bk to life mate is hugely inspiring to me. Keep it up the good work mate really enjoy it and ur journey. Many thanks from the sunny South 😎. Sid
Excellent video bro
Gotta give it to you Adam your not doing to bad are you going to get the wheels reverbed
Great work , you should really start using etch primer on bare metal parts before paint
Adam, you should be able to get a clevis pin and split pin at your local hardware store for the hand brake cable.
Try changing the BELT 1st on the alternator...🤔
Belts fine Wayne 👍🏼
Nice one smithy lad. Should take it Jm imports when you finished for a mad tune
Your car 🚗 knowledge is really good 👍 love your videos 📹
The same thing happens during your video Every single time you use your trolley jack. My dog will be flat out asleep on the living room floor then the squeak from your trolley jack has him running round wondering what the noise is 🤣🤣🤣🤣🤣🤣
Nice bit of resto mate loving the saph content 👌 👍
Cheers fella 👍🏻
Another good video mind
Juat amazing Adam the things u do & all that just 4 a button top man
Brilliant Adam well done mate another couple of jobs done 2 less before the mot 😀😀😀
How is he only on 40k subscribers 🙄 decent cossie content is few and far between 👍🇬🇧
excellent video adam love it when your working on your cossies wish i had one
Really enjoying the journey with your Saph Adam, keep it going fella . By the way that sand blaster is mint. 👍
Great video 👏🏻
Гарна робота
You're a legend pal! I'd love a cosworth. I'm down and out.your videos keep me moving. 1 day for me. Keep doing what your doing m8