How to Replace Blower Motor 2004-2006 Scion xB
Vložit
- čas přidán 6. 09. 2024
- Buy Now!
New HVAC Blower Motor Assembly from 1AAuto.com 1aau.to/ia/1AHC...
This video shows how to install a new blower motor in your 2004-2006 Scion xB. The blower motor, and typically integrated fan, is responsible for blowing the heated or cooled air from your heat or AC system into the cabin of your vehicle. A fan could become noisy if it is broken, or could stop spinning all together.
This process should be similar on the following vehicles:
2004 Scion xB
2005 Scion xB
2006 Scion xB
Tools you will need:
• Flat Blade Screwdriver 1aau.to/ot4/1AX...
• Phillips Head Screwdriver 1aau.to/ot4/1AX...
• Pocket Screwdriver
• 10mm Socket 1aau.to/oqN/1AX...
• 8mm Socket 1aau.to/oqN/1AX...
• Trim Tool Set 1aau.to/ogg/1AX...
• Needle nose pliers 1aau.to/oc4/1AX...
• Needle nose pliers 1aau.to/oc4/1AX...
• Pliers
• Ratchet 1aau.to/ovy/1AX...
• Socket Extensions 1aau.to/otU/1AX...
Subscribe: / @trq
Check out our playlist:
Scion xB 2004-2006 1st Generation: • Scion xB 2004-2006 1st...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Easy to follow directions! I'm not mechanically inclined, but just finished this with almost no issues (arthritis made some of the cramped steps difficult). One thing that I encountered with my car was having to remove the dealer-installed LED bar under the glove box. It blocked the blower cover from coming out.
Thanks! This video makes the job super easy. My Xb had a 5th screw in the white plastic cover (2 screws @ the upper right). The lower right wiring harness doesn't have to be unplugged. You can just pull it forward out of the white plastic frame and leave it connected together and tuck it out of the way on the right. Also pull the blower motor with the 8mm screws then disconnect the wiring harness from the motor after you drop it down so you don't have to disconnect the other end of the wiring from the resistor. Once you drop the blower motor you can easily see the motor connector clip and how to remove the motor wiring connector. Fewer steps = faster job.
Done, thank you for your detailed and clear instructions. My A/C works now which is crucial here in Phoenix, AZ. Would love a video on how to fix or dx a squeeling belt thats loud every morning i start the car and the belts have been changed or brand new.
These videos are GREAT ❤
You make it look so EASY. I’d be on my 37th F-Bomb 😜.
So appreciate all of your hard work. I’m sure that took forever to video with the mirror. Your videos are Fantastic ! So professional.
Honestly this the first time that i decided work in my car , most of the time i take it to the shop , and i just want to say , thanks
I followed your directions and they are easy to follow i just replaced the a/c blower
Thanks again
Good video, I’ve done other cars that were way more straight forward than this little car.
This video was SO helpful!! My son and I was able to follow it quite easily! Thanks SO much!!
Good video. Always replace the blower motor resistor at the same time while you are there, saves time having to do it all over again just for the resistor like i had to do.
Excellent information.thanks
what a informative video.
Thank You I'll be using this, Just went out on me
I'm following your instructions on 2006 xB. But I can't find the lower screws. Even with everything else removed to box doesn't even wiggle. Thoughts, anyone. Thanks
I have both the blower motor and resistor replaced. And still it doesn’t work.
I’m going to check the fuse, any chance do you know what fuse controls the fan?
Your part was the best price I could find too👍🤘
Thanks for the detailed walkthrough. Do you ever test the blower motor before you fully reassemble everything?
Great information! Took me less than an hour.
Do you know if this is similar to the scion XA ?
This worked perfect for my XA 2006, just finished!
Can you do a video of the evaporator core please?
+henry78k We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-TRQ