1st! Man did Chevrolet build some beautiful trucks back in the day. I love everything except the wheels. I'd change those to possible Chevrolets rally wheels with the beauty ring, or maybe steel wheels...old school cool! Someone spent some money and it shows!
Mine is a 1967 Chevy K20 with a 350 , 11 inch clutch , 4 speed trans , Rockwell Transfer case , Heavy Duty rear end and Dana 44 in the Front , 33 inch Superswampers LTB on 16.5 rims , mine has the thick leaf springs front and back , it was originally a utility truck that checked power lines in the 60s . She will haul , I have come off the scale at 10,550lbs and eats mud for lunch , I crossed a creek with three guys and a load of fire wood , everyone said no , but I was driving
What a beautiful '67 to bad I can't afford the monthly payments or else I would drive this down to texas what a dream love that orange&white color combo
I will say one thing----- you dinks have damn clean stuff, and even though I question your expertise on my specialty '67-'72 Chevy/GMC 4x4 trucks. But after all you haven't bought ,sold, and body-offed close to 400 of them since 1979. I get a bit touchy with your analyzation of these rigs in my domain that you get in. But I do trust you guys, anybody that would put a rig (especially a '67-'72) where you can really cobble up the cab supports and inner rocker and floor board has to either damn honest or damn stupid !!!!!! Good job on your representation --- you're the best classic car dealership I've seen out there !!!!!!!! THUMBS UP !!!!!!!!!!!
I think the 60 's chevys are still the sharpest trucks ever made my grandfather had one years ago I was a little kid it was all beat up but I still thought it was awesome and it was a work horse
Wish I still had my 67, white cab over baby blue and white bottom. I had one of the first set of white spoke wheels in the state of Oklahoma. My had the power glide and 283. Got 18-20 mpg on the highway, plenty of power to pull a loaded 20ft stock trailer. I love the color on that one, not crazy about the aftermarket wooden bed floor in that one. The 502 would be pretty sweet.
I paid $110.00 for my '68 Chevy half ton .. the Tail gate fell off.. the 307 was tired so I built a very health y 350 for it .. the wooden bed totally rotted out too..
Lower the truck to stock height, get rid of the Mickey Mouse tires and rims, and put on factory ones. Spend the money instead on a overdrive transmission, cruise control and disk brakes. Put in a black coloured seat that doesn’t show up the dirt. Then you will have a nice, “functional “ truck that can be driven every day.
This is what I want with the small back window, it would look better if they painted the stock wheels.... too bad for me I don't have an extra 60k in the bank
Only 4 things I would change in this build.1. 4L80E or 6L80E. 2. Disc brakes all around. 3. About an 18" extended cab. 4. 14 bolt or 11.5 rear axle and Dana 60 front axle with 4.56 lockers of course!
You're paint and body man deserves an Oscar award..
Absolutely beautiful. I have always loved this body style.
One of the best things on this build is the factory hood. I've never been a fan of slapping cowl hoods on everything with wheels.
1st! Man did Chevrolet build some beautiful trucks back in the day. I love everything except the wheels. I'd change those to possible Chevrolets rally wheels with the beauty ring, or maybe steel wheels...old school cool! Someone spent some money and it shows!
Yeah the rims are shit. I love the truck though.
Yea the rims gotta go! Switch it back to 15” with some 36” tires
I agree, i consider it somewhat blasphemous that they made it so nice it will never see mud or rock. Short side wall tires on an 4x4 are pointless.
Yes - the wheels do not fit.
Agree, not a fan of those 20s. 18s would be the biggest I'd go with that lift.
Beautiful build. Very talented team who put this together. Period correct wheels with some oversize rubber would look much better.
Headlights bring back memories of my uncle's 1973 Opel kaddet B, when he sold his car I went crying.
This truck is a dream.
Simply spectacular, from every angle beautifully designed and crafted, the paint finish is flawless. Well done to the people behind the rebuild.
If it had some 17 inch wheels with a more retro style and the same size tire, it’d look perfect.
Spotless. But too clean to drive.....?
Love the 502 under the hood.
High 💰 build.👍👍👍
Mine is a 1967 Chevy K20 with a 350 , 11 inch clutch , 4 speed trans , Rockwell Transfer case , Heavy Duty rear end and Dana 44 in the Front , 33 inch Superswampers LTB on 16.5 rims , mine has the thick leaf springs front and back , it was originally a utility truck that checked power lines in the 60s .
She will haul , I have come off the scale at 10,550lbs and eats mud for lunch , I crossed a creek with three guys and a load of fire wood , everyone said no , but I was driving
What a beautiful '67 to bad I can't afford the monthly payments or else I would drive this down to texas what a dream love that orange&white color combo
Beautiful truck...just needs 4 wheel disc brakes .
Disagree. It’s a lifted truck. It’s going to ride like crap anyways. Not going to be towing with it. Drums are fine in this case.
930 👍 that's the most gorgeous carrot top I've seen in along time ♥
I will say one thing----- you dinks have damn clean stuff, and even though I question your expertise on my specialty '67-'72 Chevy/GMC 4x4 trucks. But after all you haven't bought ,sold, and body-offed close to 400 of them since 1979. I get a bit touchy with your analyzation of these rigs in my domain that you get in. But I do trust you guys, anybody that would put a rig (especially a '67-'72) where you can really cobble up the cab supports and inner rocker and floor board has to either damn honest or damn stupid !!!!!! Good job on your representation --- you're the best classic car dealership I've seen out there !!!!!!!! THUMBS UP !!!!!!!!!!!
I think the 60 's chevys are still the sharpest trucks ever made my grandfather had one years ago I was a little kid it was all beat up but I still thought it was awesome and it was a work horse
Absolutely gorgeous!!
67 - 72 Chevy / GMC is probably the most popular run of the namesake ever produced
Hands down the best body style ever built by Chevy, IMO. I've owned a 69 and 70.
You have the greatest job in the world ! That is one beautiful Chevy pick up, someone will be very happy with that in their possession.
wow that is a beautiful 1967 chevy 3/4 ton pickup
I can’t afford these vehicles but boy do I like to dream!
Beautiful Rig!! It's too nice to use!! This thing belongs in the living room!
OMG 😳 I love it! Beauty of a truck! 03/67 my birthday
Just got done with my ‘68 K20 on my channel. Love these trucks. 🔧
I don't like Orange on many cars or trucks but really works well on this truck especially with the white accents.. nice looking truck.
I've always loved the 67 c/k10/20 trucks
Golly that’s one beauty of a truck!
It's beautiful, but it's a trailer queen
You would never think of taking it offroad 🤔
I would
Wish I still had my 67, white cab over baby blue and white bottom. I had one of the first set of white spoke wheels in the state of Oklahoma. My had the power glide and 283. Got 18-20 mpg on the highway, plenty of power to pull a loaded 20ft stock trailer. I love the color on that one, not crazy about the aftermarket wooden bed floor in that one. The 502 would be pretty sweet.
Would love to own this gem. So cool.
Not a bad restomod !
Yup. That's the one I want! Beautiful 😍.
PUT THIS THING AWAY IN AN AIR TIGHT SHOWCASE.....WOW
ABSOLUTELY UNBELIEVABLE
Now that's a pick-up. The real deal.
Flawless and stunning. Beautiful truck!
Wow Wow Wow .. You are a Champion
My first ride in 1975 dam i got goose bumps pulled a straight 6 put in a 283! 3 in a tree sucked lol stuck in two gears all tbe time!
This is not a work truck its a Garage Queen, Boulevard Cruiser 👍
Incredible truck! A real truck and gorgeous too!
Beautiful 67 I think its to nice for a 4+4 great restoration👍👍👍👍👍👍👍👍👍👍🇺🇸
WoW what a beautiful beast
I love Chevy and always have.
Thats a real chevy truck not like what chevy makes today
My first vehicle was a 1967 Chevrolet pickup. Short bed stepside. 2 wheel drive. I wish I had it back. 😪
Man that's my truck there, small back window and ALL!!
That's what dreams are made of. Someday man, some day lol
Sweet as hell
Thank you body for your videos is. A beatiful truck my friend looks like brand new truck
Wow, Sweet!
that thing is so beautiful I'd be concerned about actually driving it
Yep! Pretty much irreplaceable.
I LOVE IT / IF IT WAS GREEN I WOULD BE TEMPTED TO BUY IT
Nicest truck I have ever seen
Beautiful!
Wow that k20 is perfect
Those stupid rims ruined it for me
I like watching you on pawn stars.
I WOULD TRADE MY JEEP 4X4 WILLY 2020 FOR THAT BEAUTY
That's a very nice truck.
Favorite 🤩 truck
A6 compressor, worked on many of those at gm...great compressor its about = to a 2 ton compressor, could cool a house down
Woo woo man do I wish it was mine
She is beautiful !
Too nice to drive 😔🙂
My 1970 k 10 is pretty cherry, my favorite body style is the 1965
I paid $110.00 for my '68 Chevy half ton .. the Tail gate fell off.. the 307 was tired so I built a very health y 350 for it .. the wooden bed totally rotted out too..
Though I’m not a fan of 20s I must say they don’t look too bad since they’re styled like the factory steel wheels.
That’s one beautiful truck
Very nice truck.
Let me know when you have a corvette that's been re-done..
Beautiful truck..
Why wouldn't you convert to disc brakes, when you went to that extent of a rebuild ?
Nice truck other wise.
Not necessary tbh
Awesome
Some weld 15x12 super single wheels on 35s is the setup it needs.
$100k. Considering the market, probably will sell fast.
Sorry to say if i got it i would use it as a truck not a show room picture .only thing is i like stick shift
that is a Beautiful Truck!!!
Beautyful car, mee waaaant!
That beautiful truck
Thats fn stunningly Beautiful
Lower the truck to stock height, get rid of the Mickey Mouse tires and rims, and put on factory ones. Spend the money instead on a overdrive transmission, cruise control and disk brakes. Put in a black coloured seat that doesn’t show up the dirt. Then you will have a nice, “functional “ truck that can be driven every day.
Wow nice truck
Beautiful truck!....but in a crash the steering wheel will be in your chest and you have a gas tank right behind your seat! 🔥
That thing is bad to the bone! 😍
Lawd have mercy!
Put some regular wheels on it, and it’s better than it was coming off the assembly line.
WOW AWESOME FUCKING TRUCK MAN 🧡🔥🙂👊👍✌🇺🇸
cool trouck
Looks just like my truck
Lucky bastard
This is what I want with the small back window, it would look better if they painted the stock wheels.... too bad for me I don't have an extra 60k in the bank
All I want for X Mass
👍
why whould u sell such a beauty
If that thing had a 4spd granny, I'd be otw
I love this Truck but Im not a big fan of the wheels.
I'd lower it a bit and put street tires on it .
WOW!😍
Only 4 things I would change in this build.1. 4L80E or 6L80E. 2. Disc brakes all around. 3. About an 18" extended cab. 4. 14 bolt or 11.5 rear axle and Dana 60 front axle with 4.56 lockers of course!
real beauty, does it track and brake in a straight line?
Beautiful truck! Anyone know the paint code? Love that orange
Needs 16” steel wheels with hub caps
CAN YOUR NEW TRUCK DO THIS. LOL NO,,