Parkside Cordless Router POFA 12 A2 Akku Oberfräse

#ErCanEverything #Parkside #Oberfräse
🔥In this video I will show you how the Parkside 12V router performs on a walnut sausage cutting board
🔊PARKSIDE Cordless Planer Akku-Hobel Robot sans fill PPHA 20-Li A1 Unbox, Review, Test & Disassembly
👉 • PARKSIDE Cordless Plan...
🔊PARKSIDE Cordless Stapler / Nailer 12V PAT 12 B2 Performance Test on Aged dried Oak Tree & Laminate
👉 • PARKSIDE Cordless Stap...
🔊Angle Grinder Blower Attachment DIY using 3D Printer at Home
👉 • PARKSIDE Angle Grinder...
🔊How to make a Portable Spot Welder for Li-Ion Batteries using 8Ah Cordless Drill Battery
👉 • How to make a Portable...
🔊Parkside 40V Cordless Chainsaw Cutting Performance at 31 cm Oak Wood
👉 • Parkside 40V Cordless ...
🔊Make The Nutcracker Running With Drill Battery (Upgrade existing Walnut cracker)
👉 • DIY Nutcracker Running...
🔊PARKSIDE Laser Distance Measure PLEM 50 C3 (Measuring range: 0.05-50m) Just for €18
👉 • PARKSIDE Laser Distanc...
🔊DIY 80W Stereo Bluetooth Speaker using Parkside Performance X20V Team Jigsaw Box
👉 • DIY 80W Stereo Bluetoo...
👇Subscribe to my Channel👇
/ ercaneverything
TikTok👉 / ercaneverything
Facebook👉 ercaneverything
Instagram👉 / ercaneverything
Twitter👉 / ercaneverything

[@BricoMatos]

7:32, normal, ça, tu fraises dans le mauvais sens ! La fraise tournant dans le sens horaire (quand tu la regardes du dessus) tu dois aller de la gauche vers la droite, en "avalant" les fibres, la machine doit chercher à "rentrer" dans le bois, alors que dans l'autre sens, comme à ce moment précis, ta fraise cherche à s'éjecter de ton morceau de bois car elle "couche" les fibres plutôt que de les prendre à rebrousse poil (fibre) . tu fais aussi ça sur la 1ère face de ta planche, alors que sur la seconde, et sur le trou des deux côtés, tu es nickel. de plus tu dois sentir toi-même que ça va vraiment bien mieux.

[@larsmortensen]

Came here for this

[@FixitEasyDIY]

Good video. You are getting better and better every time. It is pleasure to watch your presentations. Thank you 🙏🙏🙏

[@ErCanEverything]

I'm glad you like it🙂
Thank you my Friend🙏🤝

[@aleksandrgriadovoi9282]

The bit rotates in the clockwise direction, so you have to move the router in anti-clockwise direction along the edge of the board for the bit to cut the wood. Sometimes it is useful to move the router in the "wrong" direction, for example when you want to avoid breaking away a corner of a board: pass the corner in opposite direction from outside to inside, then route the corner normally according to the cutting direction of the bit. Just google about cutting direction of the router. It is always a good idea to learn how to use power tools at least because they can be dangerous and it better to learn from the mistakes of others.

[@Tugitu]

Nice tool, great review 👏👏🔝

[@welderart81]

Very nice tools my friend

[@ErCanEverything]

Thank you my Friend🙏🙂🤝

[@HandmadeCreativeChannel]

Good job brother, this machine is really good. I need to buy something like this. 🍀☺️

[@ErCanEverything]

Really good for the corners but I can't say the same when processing the middle of the board😁🙂🍀

[@crazytraveler2198]

How will this machiner perform with a 12v 2ah battery?
What do you advise this machine or the makita replica with makita lxt battery?

[@ErCanEverything]

2Ah is weak for this machine and stops frequently!
I can't say this machine is perfect, but I prefer a Parkside that has a name versus some made-up replica they produce in some garage.

[@DjaniAgain]

Results are great Brother!
I'm wondering how this little thing is so powerful 🤔

[@ErCanEverything]

Very good for shaping the corners of boards🙂🍀

[@rodakpolak560]

👍👍👍👍

[@electroniquepassion]

👍👋👋

[@XSAILOR65]

Is it any good?

[@ErCanEverything]

It's very good in the corners but I can't say the same when digging into the middle of the board as you saw in the video🙂

[@XSAILOR65]

@@ErCanEverything OK, thanks for the reply!

[@merseyian]

Nice, looks a little shaky in mass removal maybe a saw cut or two required first

[@mathieupierremarceaupaulin5298]

Il manque un deuxième roulement sur l'arbre porte outil...

[@ErCanEverything]

I didn't understand exactly where it's missing🤷

[@mathieupierremarceaupaulin5298]

@@ErCanEverything no 2 bearing on the rotor

[@ErCanEverything]

I am not sure if there are 2 bearings or if there is only one.
If you mean the clearance in 3:30, that's because I haven't tightened the base yet and that's why it wobbles.
But the rotor doesn't wobbles relative to the housing

[@koelling]

@@ErCanEverythingis it possible to tighten the base? i heard from other youtuber, that the base is very wobbly.