Fixing my old Mercedes then realising I’ve been scammed
Vložit
- čas přidán 25. 08. 2024
- In this video I begin work on my 1992 Mercedes S-Class (W126) to turn it into a nice daily driver for myself. As I start getting into it, however, it turns out that things aren't quite as they seem.
Irwin bolt remover set: amzn.to/4fdEWB4
MOT History (registration is J115 YKU): www.check-mot....
I've been using HP Academy to learn all about car wiring, welding for motorsport, engine building, and tuning. Check out their courses at the following link and use the discount code NEV50Y to get $50 off any course!
hpcdmy.co/nev2
=============================
Business enquiries:
=============================
hello@noteconomicallyviable.com
=============================
Support me:
=============================
Buy some merch:
www.noteconomi...
Buy me a coffee: www.buymeacoff...
=============================
Follow me:
=============================
Instagram: / noteconomicallyviable
Twitter: / ninorosella
=============================
International 🌍:
=============================
Subscribe to NEV Español (Spanish) 👉 / @nevespanol
=============================
Affiliate Links:
=============================
Some of the links in my video descriptions are affiliate links, which means at no extra cost to you, I will make a small commission if you click them and make a qualifying purchase. This really helps me as a content creator and means I can continue to provide content into the future.
My advice, bide your time and find another S Class from same year and colour . Use this car as a donor . Trust me , I have been there with a couple of cars before . Don’t panic .
My wife had the W221 fully loaded version, I was glad to see it go after four and a half years of failing sensors.
+1
Perhaps the workshop should be called NEVerland?
Ha I like it. The place where projects NEVer get finished.
@@NotEconomicallyViable 😂😂
@@NotEconomicallyViable sounds like my place 🤣
😂😂😂
@@NotEconomicallyViable
Call the workshop ‘The Neverlands’ because most people would require some ‘Dutch Courage’ to even attempt starting most of your projects….
I’ll get me coat.
I had the same thing happen to me . I brought a Land Rover series 3 county from a garage with 12months MOT on it. I drove it for nearly a year but always on my own , so never noticed any problems with it. I done the usual maintenance on it. When I looked underneath it looked in really good condition for the year , so thought it had a new chassis some time in its life. I then got another MOT on it ready for a holiday to Norfolk. This was a ten seater vehicle. So we had ten family members including my self , and one of these was my 1 yr old lad. On the way I noticed that the Land Rover handled like a boat around bends. When I got home I had a Land Rover specialist look at it. I was shocked when they told me that I was lucky that the chassis did not snap in half as it was badly corroded. This had not happened overnight. They told me that the chassis had been wax oiled to cover up the bodged repairs to the chassis. Now this had been MOTed by the garage that sold it to me and a local garage to me 12 months later. Both had not mentioned the corrosion on the chassis which was so bad that the chassis was nearly rotted in half. This could have killed or seriously injured my family members. I did report the 2 MOT stations and they said they would investigate them.
Your polite suppressed anger is quite something. Good man, you have helped people by being so open and informative. Someone else may dodge a bullet because of this.
Report the MOT stations about this car - and tell them you have reported them.
The DVSA will investigate any malpractice, as this is a public safety issue.
It sounds like the seller knows the MOT tester.
A lot of MOT stations have to hire in their MOT testers as temporary staff.
The MOT tester, who issued this MOT certificate, won't have a vested interest in the future of the MOT station, as he's probably only a temp.
The DVSA has a vested interest in ensuring the MOT certification process can be relied upon by the public, as an accurate measure of the state of a vehicle.
The DVSA can suspend an MOT station's licence if they have allowed the MOT process to become corrupted.
Yep. I'm pretty sure a lot of badly modded cars get through MOTs via dodgy mates. Massively illegal tints, non-legal numberplates and loud exhausts. Your exhaust can't make excessive sounds vs the standard part. "unreasonably above the noise level you'd expect from a similar vehicle with a standard silencer in average condition"
@@justso1823what are you talking about? Anyone with eyes can see how bad that rust is
It's bad but it's worth saving
We failed a car that had a wanky air suspension kit he fitted himself arb arms disconnect, brake pipes and hoses Insecure, and rust holes near the front jacking points were he murdered his sills, he left Fuming and got a bent Mot 45mins later just north of the thames he had a baby seat in that car and he gives zero fucks just that the car looked stunning on the outside🤬
@@mickymarvin3241probably if you like welding
As an ex - tester I had hoped that these sorts of shady MOT stations would have been a thing of the past. Pass the details to VOSA and they will do an under cover visit. Qudos to you for taking the hit. Lastly - I love a Merc. But they are prone to rust and this is very common. I don't know if the super rubber underseal was to blame. But I regularly found corrosion lurking under what appeared to be unblemished factory underseal. Hope your next project is a better one.
VOSA does not exist anymore its DVSA now
You can get MOT's over the phone no problem. I've seen them advertised on marketplace 😂
@@Djwatzy 99% of those are fake FYI they just take the payment and vanish.
Yeah I consistently get adverts on FBMP for £60 ‘ghost’ MOTs. They’re rampant still
@@Djwatzymost of the time those are scams because the 'victims' are unlikely to report themselves trying to get one over on the government and getting screwed over in the process
I have had a very similar experience with a Landrover Defender, it passed an MOT two months before I bought it, then I found that the chassis was repaired with newspaper, headlights didn’t work, and lots of other bits that should have never have passed an MOT.
I reported the garage to the DVLA/DVSA and turned out he had been doing dodgy MOT’s for 200 quid on the side.
Absolutely report them and let them get investigated, you are probably not the only one.
Naaa came from the factory like that🤣🤣
You might have bought my mates old landrover. If it had a dented rear pillar, it probably was 😂
@@christhomas6116😂😂😂😂😂😂
Dude... dude dude... your workshop is a place of repair, and honestly you did nothing wrong in my eye and your fans on this channel, don't beat yourself up and pride yourself on taking it off the road.
I had a couple of these W126's. When the chrome of the rear bumper is rusted like that, usually the whole condition of the car is very bad. Also look at in the trunk, and up towards underneath the parcel shelf. If that is badly rusted, another indication of bad condition. Don't get mad. We all learned the hard way..it takes a couple of these cars to get experienced.
under the parcel shelf is always bad, even more so on the coupe
unless someone has either looked after it very well or done some work on it
chrome bumpers are not a good indicator of body condition as can easily be replaced, ( assuming you can afford the ridiculous price the chromes are now selling for )
I bought 2 complete sets of 6 brand new from Mercedes for £450 a set including all fittings, a while ago, the parts are probably twice that now if you buy them second hand.
Interesting point is MkI bumper chromes are twice as thick as MkII chromes, have twice as much plating on them and last twice as long.
The MkI euro bumpers also look better than MkII euro bumpers which were extended to meet later collision testing standards, and the US bumpers are a complete abomination of Bruno Sacco original design.
you can inter-change bumpers but you can't fit MkI chromes in a MkII bumper
@@elvisburgerking8675 personally I like both the EUR and USA bumpers of both MK1 and MK2 of these W126's. BUT, the USA R107 bumpers on those SL's THAT's a true abomination.
As a MOT tester and Unfortunately I've seen it all, and it's not all that unusual, but the only way to find out how bad it is, is to put it in for a MOT, the DVSA won't be at all interested, it's been a year, and the MOT bare minimum, I'd love to go over it with you and do a pre MOT inspection, and we could really see what we're looking At.
Give the guy a break he’s an amateur and is learning as he goes. Personally I would report the mot station for giving out a certificate when it’s definitely not road worthy. Keep up the good work love this channel.
Thanks for being so discriptive with your videos. I'm totally blind and used to do a lot of car repairs and engine removal work. Your eexcitement and passion makes me miss the hobby a lot! Thank you for all you do.
Im pretty sure I saw a video of a blind mechanic once. It's been a while and I don't remember the details.
@@fr33dumb0 I miss it a lot! Working in a call center now, big change. Will get back to it in a few years once i get a house. I was in new zealand then and friends with owner of a recking yard. I don't yet have those connections in the u.s :)
More than an hour long video, You are treating us very well :)
I try my hardest 😁
I love the content and the way its presented, but if I was to have a small criticism (hopefully constructive) for me, a video thats 1hr 18mins is too long. Maybe cut it into 2 or 3 smaller video’s? My reason to suggest this is that I haven’t got the time to put that much time aside to watch a video in one sitting, and if I switch it off to come back later I will forget to do so, or other shorter video’s on my subscriptions will be watched first. Maybe more people would be inclined to subscribe if the videos were shorter, say 25mins, and could be watched in full whilst they sit down for a cuppa. As I said, thats just my opinion though, and definitely not said to be a negative comment on your excellent work.
Me too - I’ve been dedicating time to binging the longer series playlists (while *ahem* tidying the garage) but I love the feature length ones.
Perfect Sunday eve viewing. Thanks Nino, great to see a bloke living his dream.
Just the no advisory part red flags me , cant think that a 33 year old car would be absolutely fault free
Soldering tip - put an elastic band around the handles of your pliers and they will hold onto whatever you’re trying to solder so you can have a spare hand to hold another tool,like a solder sucker
you don't need to on an old Mercedes, those old thick type copper connectors solder on and off wires very easily
you don't even need solder, a bit of flux and connections are back as factory
As an ex M.O.T. tester and mechanic that took pride in my work, (Not a fitter as they all seem to be now) I would strongly advise to follow up via the powers that be. Not only for your benefit, but to protect everyone else on the road, and probably more importantly the innocent kirbside victims that aren't protected inside a metal box. As someone else eluded to about temporary staff in testing stations, we know that this insn't the case here. This is a career tester, which I would suggest is very well known to the "customer". Just my 2cents worth.
Karl
Can you see anything that would be a fail though? That rust up near the front shock mounting looked like surface rust on first glance until poked with screwdriver, so would have been a pass at MOT. I'd wager it's a similar story underneath - a nice even coating of the brown stuff across everything (I have 30yr old cars that are like this)but no holes showing, so looks entirely surface.
@asdreww It had been seen and advised 3 or 4 years earlier according to the MOT records.
@@asdrewwthat’s why even surface rust at shock points is a fail, as stated in the video. Perhaps a tester can clarify
@@fanfeck2844 Not sure that's totally correct - I think the failure is 'excessive corrosion but metal not perforated' or something like that. Basically, the metal is obviously very weak/thin from the rust, bends when pressed etc. just plain surface rust on solid metal won't be a fail.
Call the workshop "The Money Pit" bit of a double meaning and ties in with the name of the channel 😂
Beat me to it.
THIS!
I had a a very similar thing happen to me. I bought a 1981 Mercedes SLC with a brand new MOT, got underneath to do a small job and i was horrified with the rust. The person i bought the car from, owned a coach business transporting children too and from school. And guess what, the same MOT station who had done my car also done his coaches. I reported him to VOSA. He also paid for all the repairs which needed to be done on my car.
A tip for soldering - use 60/40 leaded solder only. The lead free stuff is a nightmare to work with.
New name for the workshop should be The Money Pit. Sorry to hear about the nonesense happening with the car, at least the kit and wheels are worth money. On to the next one and I'm looking forward to watching!
I’ve got a ‘96 S600 that was imported to the states from Germany in the early 2000’s that I refused to work on until I started watching your videos on this. Giving me the confidence to go and try it on my own! Much love❤️
good luck bro !
the MkII s600 w140 like yours ( and mine ) is the hardest and most complex Mercedes to work on BY FAR
even Mercedes mechanics don't want to go anywhere near one, and/or are incapable of working on it.
saying that, if you can't fix problems on it yourself then you are going to have to re-mortgage your house.
@@elvisburgerking8675 Hah! Yeah, even my local dealer refuses to touch it because it is “too old”. But, slowly and surely working out some of the wiring gremlins and dealing with the 7226 transmission having to get parts from a Chrysler dealership! Such an odd car but I honestly love its quirks and its story.
@@MK7Volkzy he is probably just saying " too old " because he doesn't want to admit " it's too complicated for him " and it doesn't have an ODBII diagnostic socket. Older cars were simpler and much easier to work on, however difficulty and Mercedes complexity PEAKED with the W140 with the facelift s600 being the hardest and most complex of them all. last time I checked there were only 20x roadgoing s600 saloons in the UK and 8x W140 s600 coupes in the UK.
@@elvisburgerking8675 yeah I have a limousine class S600 sedan, just grateful it isn’t like the generations previous with the biodegradable wiring harnesses lol. Will slowly but surely figure this car out, it is my mission!
unfortunatelly for you, it's much worse, i had a january 98 coupe with very low mileage, i literally scraped it for parts ( and profit ) in favour of a 93 coupe with over 3 times the mileage, i still drive the 93 coupe every day/10,000 miles a year/ average 20mpg for past 15 years without any problems, the 94-98 i would never touch again except to break it for spares. it all went downhill for Mercedes in 1994, so many changes to cut production costs, all the known problem of the 3 engine wiring harnesses on the early models 91.92.93 can easily be rebuilt in a day at almost no cost to you whatsover, the problems with 1994 onwards Mercedes are many, constant, difficult and very expensive.
A mate had his car written off by a red chesterfield sofa like that, it had blown off the back of a pikey's flat bed transit. Being at night with all the red bits exploding everywhere he first thought it was a deer.
😂
Pikey is a discrimination expression Keep yourself covered and use the expression tinkers
Wtf 😂
Oh dear
Haha what are the chances
I've been watching you since the very beginning of the channel and you got me into working on my car, wish you all the best brother ❤️
That's very cool to hear 🤝
I love this channel and your openness and honesty
That M.O.T is dodgy as hell! Report the person responsible!
lol
You bought that car "sight unseen". You then proceeded to work on it and spend cash on it before having a bloody good look at it. You didn't even get your MOT bloke to have a look at it before your endeavours. It's an old banger with some valuable parts. Strip it , sell what you can and learn from the mistake.
Agreed. I'm sure it makes for good content to pretend to be angry, but he's been under that car numerous times and only just happens to notice that it's falling apart. Not buying it, and it's a shame to resort to such clickbait.
Faulty Towers
Agreed, however I can see how he got a bit excited about the mechanical work and got carried away. A proper lesson this, always have a good look around and under a car, especially an older one.
Rust in the engine bay should've been noticed within minutes of working on the engine, again a lesson learned I hope.
Mot just tells you what has been done not what needs doing!, the cleaner it is the more you better roll them sleeves up 😉, Seams genuine to me, sad to see the merc go, he’ll love welding good fun!
this does not change the fact it's had dodgy MOT's.
Definitely my new favourite channel. I came for the Range Rover rebuild and stayed for every video since!
I also love how long and in-depth your videos are compared to other channels!
Keep it up
Was well impressed with your perservence on the k jetronic system
She was idling nice. Was a pity about the rust but you should have spotted it first. Dont bother reporting mot stations , just break her and get your money back and put it down to experience. Buying stuff blind is a no no , the motor trade is full of scoundrels as you are finding out. I love your enthusiasm and enjoy your channel. Not the end of the world bud just move on , thank you for your channel. Mick Wexford Ireland
I feel for you mate, id be fuming aswell, that seller and mot station literally put your life and your familes life at risk, thats disgusting. So glad your all safe. Live & Learn 🙏
"Freeze-Off" can also be used in place of heat sometimes. That doesn't help when thread locker is present, but maybe it helps next time when an open flame is not suitable --> CRC Freeze-Off Super Penetrant
Compared to all the car repair / restoration videos on CZcams, yours are by far the best. Please keep making them. Best regards from Blackwood, South Wales.
Appreciate that 🤝
MOT only tests if the vehicle is road worthy at the time of the test. However, in this case, it is clear that the MOT station has just passed the car with holes in the structure of the car. I would report the MOT stations.
For me, it have to be called viability HQ where all cars go to have the viability tested and questioned on whether they are not economically viable.
Mann filters are probably oem fitted by Mercedes from new as do vw use them today when you buy genuine filters,, and are very good quality . Old Mercs are rust buckets and are not what people think they are..
The sunroof has drains on each corner of the inner frame. If the drains are good it won't leak into the the cabin. Also the sunroof tilting/ sealing mechanism which is the part you discovered broken can replace and isn't that expensive, it's not too difficult to replace.
Sadly there's so many scam artists, and when it comes to money and cars some people just don't care what they sell. You're not alone in this mate, it happens a lot sadly.
*:40 when applying heat, doesn't have to be a flame, a red hot bar (or a scrap allen key to plug in) will also do the job.
Also some stiff joints require time. Just leaning on a bolt for a while will cause it to loosen, rather than trying to snatch at it.
Another useful thing is to tap it with a metal hammer, to loosen the bond.
Tapping, heat and then lean, works in many cases.
I can always tell your vids are intresting, i find it interesting and entertaining 100% of the time :) Amazing work keep it up!
Nice that you can view the inspection (MOT) history. Can't do that in USA. Also crazy that a garage would pass that. Fun fact, at least in North Carolina USA, older cars do not require annual inspection even if you drive it. My '89 and '72 BMWs are not required to be inspected. I just have to renew the registration / pay property tax on an annual basis.
That's only if you have antique plates. Any car with regular plates, whether 30 or 50 years old requires a safety inspection each year prior to renewal.
@@colinsmith364 Not in NC. I haven't had to inspect my '89 or '72 for as long as I've had them, and the '72 is due for renewal this month.
The scary thing is, cars in the UK over three years old need an MOT, a caravan or trailer doesn't! Plus the amount of Porsches I've seen with slick rear tyres at 2 years old is frightening
@@neilg3364 I remember seeing a report in the papers back in the 70s where they tested new cars straight out of the showroom and a fair percentage of them wouldn't have passed an MOT
@@dungbetel,,,yeah. I remembered that show. I think it was 'nation wide" or maybe 'that's life " showing my age now! 😢
The rear footwell filling up with water can also come trough your venting system which ends under your front seat.
Regarding the injection system, the plunger in the distributor can get stuck. Just a push on the inlet flap normally get's it unstuck.
It can prevent getting fuel pressure to the injectors. My benz regularly has it after standing a while.
If you bought the car unseen but described as a non runner with two days mot and paid less than the value of its wheels I don’t think that’s a scam. You got what you paid for.
I’m confused, you purchased a car that was on its way to the scrap yard and you purchased it sight unseen, it’s a gamble that didn’t pay off surely, I’d report the garages though
Yes but, based on the MOT history, he did not expect it to be a potential deathtrap. Structural point failure is not something I would like to experience at any speed.
Missing the point, you're supposed to trust an MOT
@@PaulJones-bu2ho nope, you are missing the point, why spend hundreds if not thousands on something you haven’t even seen, don’t trust anyone expect yourself
The big boss in his own workshop❤
I’m gutted for you, this should have gone differently. Yes, It’s always a risk buying sold unseen, that would be a different story though if the car was already off the road. You would have just chalked it up to experience, the sad thing is, this car clearly shouldn’t have been on the road, probably for some years now. The car could have been a potential death trap. I’m just glad that you or someone else hasn’t been injured. Don’t let this experience dampen your enthusiasm, it’s just a chapter in your life’s journey. I’m really proud of you for putting this out and not just sweeping the rust under the carpet. Looking forward for the next project, or project revisited 💪🏻
Don't beat yourself up about this, you are a decent guy , people like them have a broken morale compass and that will direct them in the wrong direction in life. Keep at it, move the car and keep positive !
When I was a penniless student in the early 1980s we all used the local 5 minute straight through MOT place. Drive onto the rollers for a brake check and put the lights on. Drive around the front and pay cash for the ticket.
When test stations became computerized and linked to VOSA (now called DVSA) most of these sort of places died out.
Same in Australia at that time.
I never neglected safety items, though.
When one of the MOT stations round our way got popped the others had to get tough. they demanded to see a photo of the car! I once MOTd a Mini and the guy who bought it came and complained that the tester needed a dog and a white stick. The car was totally rotten. "I tested that registration number but definitely not that car!" , I explained. No taking the chassis number in those days. A car same make and model year in the same colour, just change the number plate.
My fastest pink slip in Australia was in the 90's when a tester( a 70's big name race car driver) who had a broken leg in plaster just didn't bother driving the car with the brake pedal tester...he just pressed on it with his broken leg in plaster and passed me...the car was a good one and I think he knew that I was fastidious mechanically safe but it made me laugh at the time...A bad one recently here in NZ was a tester who passed a car then the pimply owner got home and put his lowered springs in and then the following day got pulled over with a day old WOF ( NZ warrant of fitness) . The WOF/ garage owner got his licence pulled and it cost him $10,000 in lost work and lawyer fee's. From there on anybody young/new/suspect gets the car photographed and dated.
Call your workshop, the Death Star
The Death Starter 😂
Death car
That would be a nice nick for this Benz!
Don't be too down mate. It happens to loads of people. At least you have content. Maybe this could be a long term project.
I went in Mercedes taxi from Birmingham to Gatwick airport last month. The suspension was awful plus a whole bunch of other things that made the ride and braking really worrying. The driver said it'd been MOT'd the previous month. I photo'd the number and checked it and yes it had been MOT'd the month before. The car was unsafe, I promise you.
Loving the Chesterfield man! That’s what I call doing it in style!!! 😎👍🏼
How many people looked at their phone when you heard the Ebay notification 🙋🏻♂️😂
haha
Gutted for you, it's a good looking car, invested quite a bit of time and all for nothing! Your content is brilliant, and the journey you're sharing is amazing 👏🏼
You need a solder sucker tool - removes all melted solder and leaves a clean work surface for re soldering.
If nothing else you have learned a valuable lesson,don't forget that you bought it as a piece of scrap regardless of weather or not it has an mot certificate, there is no substitute for experience,and your still new at this game ,However you look at it you will learn from this and won't make the same mistake again
Better luck next time best wishes.
The seals in the injectors are the most important part to change 🤦♂️👀🤣🤣🤣
Not at that price lol
@@NotEconomicallyViable it ran call that fixed!!
@@NotEconomicallyViable check out polymax and see if they have the right sizes (youll have to measure your ones)
Maybe he should cross reference his project vehicle...I bet those injector seals are a common size....why pay Mercedes prices.
What an absolute shame as you’ve done so well on it so far ! Terrible behaviour by who ever mot’d it and sold it. The alarm system (cobra) you took out was a decent system back in the day, very reliable, if fitted correctly. The black potted box housed the immobiliser section and had 2 immobiliser points with four wires, usually we did the starter and the fuel pump or if lazy we’d do the ignition live supply that doesn’t drop out on crank at the barrel. The siren housed the alarm part of the system and was linked to the immobiliser by a wire marked “code” before cutting it off to fit it. If the windows up feature was fitted it usually meant an extra module wired to the window switch in the drivers door or console depending on where the switches are as these were before the total closure feature later on. Soldering will get easier with practice, some flux will be your friend ! Ex car audio and security fitter from Essex 👋
Really sorry to see how this turned out mate. Cut your losses, walk away, your decision to report or not, social media can open your family up to things you never expected from people you never expected and it’s not a nice world. Check everything from now on, learn from it and move on. Great content, keep the nerve and keep going.
How about NEVerland? 🙂
You don't need the hassle, as you say you win some you lose some, move on to better things.
Your not alone, I all ways get a kick out of fitting new parts on old vehicles
I've been playing with these for 40 years
Mercedes steering wheel removal
Buy a quality 1/2 inch drive Hex socket from a good brand like Sykes-Pickavant or Snap-On
you won't regret it
and then use your extending wheel brace and two hands, one to keep it centred, to undo the bolt
also get a strong friend to hold the steering wheel very tight in opposite direction while you undo it, to prevent damage to the steering lock mechanism.
otherwise you are going to be drilling it out and on ebay each time buying a replacement bolt for £15 including postage.
P.S. as you are about to find out, there is no need to remove steering wheel to get at the Ignition lock
as ignition lock removes very easily with just 1 easy to get to bolt ( so long as you have Ignition key )
without a key, the steering lock is made to be very resistant to the type of kick steering wheel and hot wire car theft common to cars like Fords and Vauxhalls etc., infact all other cars.
P.M.S.L - and as you are also about to find out, they all rust badly in the same places, UK = rain, it's not like California or Texas, there are very few around that haven't been welded and don't need welding. Good news is there's plenty of Ukrainian welders around that can sort out all the structural bodywork issues relatively cheaply.
Take it to the last mot test center, tell em to fix it or they get reported to DVSA. Make sure there is documentation in place to say they agree to make it mot worthy free of charge. I assisted a friend with this kinda thing. The garage had a dodgy tester who was suspended at the time I called but agreed to collect the vehicle from 70 miles away, fix it and re deliver at their expense.
This is worth a punt
from what I remember, this car was supposed to go to the scrapyard, now you see why, you weren't cheated, you cheated yourself by getting your hopes up
He was cheated because the MOT was faked. The MOT history gave the impression it was free of issues which it clearly wasn't.
@@markpalmer9844 kupił samochód po cenie złomu, myślał że zrobił interes życia, gdzie tu oszustwo? Dostał to za co zapłacił a to że zaczął w tego gruza pakować kasę zamiast go najpierw obejrzeć samochód to jego błąd i więcej go nie popełni, widzę że tam u was w Anglii stacje kontroli pojazdów idą w złym kierunku...
@@thejudge-kv2jk u nas w Polsce mało kto ufa diagnostom niestety, rzadkością jest uczciwa stacja kontroli pojazdów, jeśli jesteś Anglikiem to ty i twoi krajanie powinniście z tym robić porządek na bieżąco żeby to nie stało się codziennością
It had a fake MOT. Regardless of where the car was headed!!!
Why not take it back to the same garage for a full inspection test, you never know it might pass its inspection 😂
You could name it “The theatre of dreams”, then name the 4 walls, “no hope” tools, “last hope” tools,….
Keep it going
Cant always blame the MOT station, that test only guarantees that the car is road legal at the time of test.
A year has passed, you dont know the kind of life it's had since then. It could have lived beside the sea, it could have lived in an area where the roads are overly salted. It could have had all the good bits swapped with another vehicle.
Good point sir,I've known a from new vauxhall astra,3 years from new a write off in 3 years being parked on blac sea front.(a guest house owner)chassis turned to lace.😢😢
Don’t be daft!
That sort of corrosion doesn’t happen in one year!
Use to have loads of merc vans in the 80s and if someone tried to nick one the dash would be a mess but the ignition would still be there intact, saving the van
I think you should name the workshop calamity corner😂😂😂
It's a lesson to be learned. But you had fun along the way, and made some good content from it. Sell the parts and move on to the next one!
I had a similar 'scam' experience a few years back, I went to buy a little Seat Leon that susposedly only needed a clutch, and I wanted to learn how to do it myself. As I found out later, the reason it needed a clutch was because the gearbox had exploded internally, (and somehow still ran 'fine'??) puncturing through the bellhousing and leaking gear oil onto the flywheel. But the previous owner had clearly tried to cover this up as there were tell-tale signs of missing/loose bolts, broken clips, cut wires etc. as he'd realised what had happened, tried to patch it back up and flog it.
When life gives you lemons...
Absolutely should report the MOT station and tester...... there's now no telling how many dangerous cars are on the road which hold a MOT pass certificate.
People HAVE to be able to trust the certificate.
If you see a fake AMG label on a car, don't even bother thinking about buying it. Same goes for "M" on BMWs, and well, actually almost all old beemers.
You have opened peoples eyes on what workmanship is like today from certain M O T garages. They are just there to just rip you off. Well done, Ned keep up the good work.👍🏼👍🏼👍🏼
You are doing a good job. It’s ok on the Merc, a learning experience. I enjoy learning stuff with you.
This channel is the best. Your humble personality goes so well with the content. It makes it both genuine, relatable and entertaining. Please continue for a long time.
Appreciate that 🤝
That's heartbreaking knowing the condition of the car. Hope for better luck for another project!
Oh, thank you for this video! I'm really looking forward for having second hand benz and this video really give me some insight about the innards of benz in this era (especially the ke-jetronic injection thingy. Already skimming through internet and some people have said most of these systems already have seen better days and needs some love).
I'm quite fond for these 90's mercs, especially the 124s.
You need to report the last MOT garage to DVSA
In reference to an old Donut video and in honor of the channel name, you should call the workshop Quid Hole.
I'm going through a similar issue with a Mazda 5 from a used car dealership I bought a year ago. It came with a 12 month MOT with an advisory on the rear brakes which I was aware of. A year later with the latest MOT it has came back with major corrosion issues that should have been picked up 12 months ago. I'm now left with an unusable car so I am left with it on finance at least it wasn't a lot . The garage all together with the corrosion being the biggest issues quoted at £1700.
Have been watching since you got the VW. Can't believe I have not subscribed sooner.
Really love the content you produce. Keep at it!
The way you approach the repairs and the aura you have is excellent. There are other CZcamsrs out there creating content of similar but I just can't get grips with it. However your content is spot on.
After you had discovered about dodgy MOT's, unfortunately I had a similar experience with my first car a Vauxhall Corsa B 2000 - headlights held on by a cable ties, none stop oil leak, entire suspension was off right from the start and not forgetting the huge Rust discovered in every corner.
I now own a Mk7 Honda civic 3 door. Brilliant car, serviced every 12 months, repairs carried out after every MOT albeit, ball joint, track rod etc. Only issue now and then is the headlights discolouration which again is shown by the MOT tester.
Sorry for rambling on.
But personally, like others have said you should report that MOT station/tester, they could be passing cars left right and centre and the owner of them cars is have a last laugh when they come to sell it on affecting other individuals.
Like you say, we trust this test every 12 months, to be carried out by competent people.
What about using this car to learn to weld ? My wifes xtrail had rusted out rear shock turrets , boot flloor full of holes and rear sill rottern . Wife bought me a welder , all the gear required and 1 month later car was sorted after lots of practice first . Still rock solid 2 years later and it would have been over a £1000 job if paid someone to do it and therefore the car scrapped . Rear arches are going now so here i go again lol 😆
That's a 50 quid note in the glove box MOT. I don't trust anyone selling a car these days and that includes traders. There are so many people "flipping cars" these days and some of the CZcams channels I've watched where some kid is "preparing" a car to sell are an absolute joke.
Call it The Bunker. You are always fighting cars.
How can you put the car through a MOT test when it don't run, have fun with the car because I love watching the videos anyway, forget about all the negative people out there we love watching you and it's your channel, your learning as you go along that's what we love. Just carry on ❤
These dodgy stations need to be reported.
Gutted for you regarding the Merc. I hope your luck changes for your next project. Great content and channel. ❤
Breaks my heart to see this thing can’t be saved, but man that rust is definitely terminal. Oh well, at least someone with a solid W126 can get their hands on the wheels and body kit.
Love your vids and the way you come across. You're a natural, lol.
Regarding the leaking sunroof, make sure the drains aren't blocked. They usually are and the recess fills and leaks into the car.
Good luck
as an italian, a nation known for dodgy everything, my first tought was "plot something to cover the holes and pray"
yeah, seems like that for y'all up there the security inspection actually means something. it's kind sad for that car to be that rusted, i wouldn't own one, but it looks cool
I had the same problem back in the 70s and i thought i knew all about cars .So dont take it to heart .. My purchase was a Jahuar 3.4 it had a buiscuit tin welded to the floor pan.I told Trade Desciription and they took them to court . The Jaguar also had a MOT certificate fot 12 months .good luck with whatever plan you do ..
Call your workshop,
Fix a wreck, or
Car Theatre. (Operations)
I bought a Ford Maverick 2.8 from a 'garage' with 4 months MOT on it and everything was fine until someone went to put the rear seat belt on and it pulled away from the body. I then went to another garage for their opinion and his face said it all, the corrosion was old stuff. Next day I drove it to its last MOT station and he did a full repair free of charge, after a few choice words...
Try it, you might like it 👍
The Merc seems very much like my MGTF, had a ‘good’ mot history but when I got the ‘records’ with it I wondered why the previous owner sold it. It was motd for me last year and had some minor things but seemed ok. Even doing the tap on the potential iffy areas sounded good.
But there is a big hole in the rear of the sill on the drivers side, expertly covered up with fibreglass and filler which trapped water and caused a hole so big I’ve decided to scrap the car. Had another explore today and found more filler over a dent in the sill done by what I think was a jacking error. But filler over rust doesn’t help the rust.
So no more 20 year old cars got me I’m going back to 40 + years old as they seem to at least get repaired better
Perhaps the body is where all investigations should start on these 15 year old and older cars ? Bit boring but would save a lot of wasted effort
Keep going life’s all about learning from experiences 😉
I have quite some experience with car electronics in my 30 years career car mechanic.
I would start this quest by looking for a few basic answers....
1 ) when starting is their a spark...
2) if there is no spark...
a) when ignition is on does the ecu get power (+12v>)
B) when starting is the ecu under power (+12v) power ?...
You must answer these questions first before you begin the rest of your search...
When troubleshooting You must learn to work systematically and answer questions 1 by 1...
After these checks you should check if there is fuel pressure when starting...
This is important to check that during starting there is correct fuel pressure...
Then check / measure compression in all the cilinders...
These 3 basic conditions are necessary to check because you need spark , fuel and compression for the engine to run.
By systematically doing these 3 you will get the answer to your problem.
Is it electric... is it fuel or is it mechanical...
Also important ( which is difficult) ignore people on social media who have clearly no experience or clue on troubleshooting.
REPORT THEM!
They put your life at risk by allowing that car on the road.
If they have such disregard for your life and those of other road users then they deserve nothing but the full force of the law to shut them down.
Maybe Yorkshire Car Restoration could do something with it. Either for them to work on once you have sold the parts to get your money back, or to do a joint project.
on some of these k-jet engines, there is a pressure ackummulator in the fuel line coming from the tank - its purpose is to hold some pressure for the next startup, your slow start could be a cause of a faulty ackummulator if there is one. Usually a tell of this is if the car starts easy immidiately after shutoff, but not when sitting for a while.
26:54 This is why I hate sunroofs, and why I was incredibly lucky to find a 2nd gen W126 (300SE, like yours, but with the basic 5-speed manual transmission) without a sunroof.
Same, I overpaid for my discovery 1 with no sunroof because body work is easy to fix, but if the roof is rotted through they're a nightmare, new body job.
If an old car has an MOT list as long as your arm, don't buy it.
If an old car has a totally clean MOT, don't buy it.
I second FoMoCo advice , we have all been there, The car is a machine, and it's done for. Take the wheels and the useful parts off and part what's left out. My grandfather once told me, you only lose money if you don't use the experience as schooling, anything you lost is the tuition, if you look at like that, you have learned something very useful. I'd take a lot of picture's and turn it all over to the MOT officials, names and locations. That way you don't get anything in monetary amount, but the SOB who sold it to you his name will now be on someone's radar, and use the information, and just move on, you are new to this, but I think your going to do very well at this CZcams venture !
That’s shady as hell; the testing station 100% needs reporting.
The worrying thing is that many cars only get looked at during the MOT, so if that’s shonky….
Report that MOT. Stations like this need to stop existing. They are putting people's life in danger. Not only the driver of said car but everyone elses!