🇬🇧 Machinist X99-MR9A - better than expected, detailed motherboard review
Vložit
- čas přidán 7. 07. 2024
- Українська версія: • 🇺🇦 Machinist X99-MR9A ...
Yet another review of yet another Chinese X99 motherboard - Machinist X99-MR9A. This one has positively surprised me.
X99-MR9A (affiliate link): s.click.aliexpress.com/e/_AXVdnr
00:00 Welcome to Miyconst Hardware
00:17 Stand with Ukraine
01:06 Test results
05:46 CPUs with 28 PCI-E lanes: i7-5820k, i7-6800k
06:46 Conclusion
Discord:
/ discord
For business related questions:
onegigahertz.se/
Use the following AliExpress links to support my channel:
LT866II: s.click.aliexpress.com/e/_9wLO2I
CH341A: s.click.aliexpress.com/e/_AdHGX7
- LGA 1151 -
Asus Z370M-Plus: s.click.aliexpress.com/e/_ADLdtE
MSI Z370-A Pro: s.click.aliexpress.com/e/_AWlfIq
Gigabyte B365M: s.click.aliexpress.com/e/_A1aqUW
QTJ1: s.click.aliexpress.com/e/_AsS4HP
QTJ2: s.click.aliexpress.com/e/_9fG71x
QQLS: s.click.aliexpress.com/e/_9f7Nmd
I7-8700B: s.click.aliexpress.com/e/_AajIBb
- LGA 1200 -
MSI Z490-S01: s.click.aliexpress.com/e/_ASNpci
Maxsun / Soyo B560: s.click.aliexpress.com/e/_9ygxsv
- Huananzhi -
X99-TF: s.click.aliexpress.com/e/_97l0sq
X99-F8: s.click.aliexpress.com/e/_9Q1ghs
X99-AD4: s.click.aliexpress.com/e/_AZ5Tj0
X99-BD4: s.click.aliexpress.com/e/_98bPVc
X99-8M: s.click.aliexpress.com/e/_AaoL7s
X99-8M-F: s.click.aliexpress.com/e/_9ADEeE
X99-ZD4: s.click.aliexpress.com/e/_AmEa7y
- Machinist / Alzenit / Shuangwei -
X99-MR9A: s.click.aliexpress.com/e/_AXVdnr
X99-K9: s.click.aliexpress.com/e/_AeKnjf
X99-RS9: s.click.aliexpress.com/e/_AX34aw
- Xeon -
E5-2620 V3: s.click.aliexpress.com/e/_9780Hu
E5-2630L V3: s.click.aliexpress.com/e/_9gqjN8
E5-2640 V3: s.click.aliexpress.com/e/_Ag932O
E5-2660 V3: s.click.aliexpress.com/e/_9Ahzgt
E5-2666 V3: s.click.aliexpress.com/e/_9zb9zb
E5-2678 V3: s.click.aliexpress.com/e/_9gqjN8
E5-2697 V3: s.click.aliexpress.com/e/_9IEXAH
E5-2698 V3: s.click.aliexpress.com/e/_A6rTjJ
E5-2699 V3: s.click.aliexpress.com/e/_AqIpnP
E5-2680 V4: s.click.aliexpress.com/e/_9gqjN8
E5-2683 V4: s.click.aliexpress.com/e/_A5Pw3x
- SSD -
Huananzhi SATA MLC SSD: s.click.aliexpress.com/e/_AmwG4q
Huananzhi SATA QLC SSD: s.click.aliexpress.com/e/_Ab89IE
Huananzhi M.2 NVMe SSD: s.click.aliexpress.com/e/_ACgCDU
- RAM -
X99 users - ALWAYS ask sellers if RAM is compatible with X99 before purchase.
Samsung DDR4: s.click.aliexpress.com/e/_9jT8S6
Corsair DDR4: s.click.aliexpress.com/e/_APTKVH
- AM4 -
Asus ROG STRIX B450-F: s.click.aliexpress.com/e/_9Jt4Aa
Ryzen 5 5600X: s.click.aliexpress.com/e/_AFPggz
Ryzen 5 5600G: s.click.aliexpress.com/e/_9HDNjo
- X79 -
X79 V2.82: s.click.aliexpress.com/e/_9w1PR0
My Ukrainian partner:
- Alex Povzun
- profile.php?...
- / povzun_alexander
My Italian partner (Milan & Turin):
- MirComputers / Gabriele Carbone
- / mircomputersdesign
- / mir_computers
- www.pizzaundervolt.com/
My Polish partner:
- HUANAN POLSKA / Rafał Bogusz
- profile.php?...
- huanan.pl/
My blog: miyconst.github.com/
Music: www.audiomicro.com/
Music: www.soundtaxi.com/
📸: / mi8.se
PayPal Donate: www.paypal.com/cgi-bin/webscr... - Věda a technologie
You are the only channel that I go to for this stuff, and I love your detailed explanation. Thank you. I saw this board pop up and was always curious since you hadn't covered it yet.
Stay tuned, I have a few more motherboards incoming.
Miyconst.... you are an asset to the computer x99 hardware community. Keep up the good work. Please keep making videos, keep testing products that you think deserve testing. Great Job...
great review, thank you for the hands on testing.
Wow, so great to see Chinese improving, and not only raising prices on older and messier boards. I do believe that your reviews are forcing them to do good, because if you highlight the troubles on a model (and you really know how to find them), people will go to another model and brand, hence a loss of sale. And video quality is great (as usual, I'd say)
Thank you very much for the support, I really appreciate it.
What "older and messier" boards are raisin in price?
Very helpful and informative, thanks for this video.
oh dude thanks for the review! u are amazing :)!
Thanks for the support!
This board indeed looks pretty good!, One thing i like about this one is how they placed did the pcie slot placement since you can put a really big chungus of a graphics card in it and not cover any other slot
That begin said if you dont really have a 40 pcie lanes cpu that advantage is nullified but the fact that this little detail is there alongside with many fixes specially sleep mode working is really amazing
Great video as always 😌
Glad you are looking better, hope your friends and family are fine. Also, you actually managed to dig up a decent board, which seems to be getting harder and harder!
friend, thank you for everything you do for the community. Thank you for your commitment to bringing relevant content to us.
Thank you for the support, it's really appreciated.
I'm just here to thank you for the hint on S9170.
I had an Accelero Xtreme III lying around: that and a S9170 are doing a great job.
I'm using the HDMI output from a B365: some small performance loss due to buffer copy from Radeon to iGPU but I've a clean HDMI output and the embedded iGPU is still doing great with video encoding/decoding acceleration.
Your videos are awesome! 👌
Very helpful video - great detail
I'm still using the x99 from EVGA 10 years later looking to buy another one because it still runs new games amazingly. The only thing I upgrade it on it was the processor to 6950x and 32gb more RAM. Not to mention ssds. 2014 Was Great year for PC hardware.
Thanks for the review
Nice! I will buy one right now!
hello Miyconst, great video as always, I've bought this motherboard and in my experience I had the motherboard with the little fan (like the pro version) and not the sink, audio ok but I wasn't able to get the audio front panel to work.
Keep it up the good work!
All these Chinese X99/X79 motherboards are known for random issues with Audio, network, USB. Some models have better quality, others don't. You lost the lottery here, I guess.
I've got enough and I'm happy with it. Was just for sharing my experience.
Another excellent review
Hello all, having tested this motherboard with the 32gb bundle from machinist and the e5 2666 v3, the combo works very well with turbo unlock enabled. Very smooth gaming experience - paired this with a 1070 ti and works a dream!
Did you apply the turbo unlock or was it like that from the factory? Thanks.
Is it possible to have something like coreboot fully working on this one?
Great review! Most important things mentioned, a good motherboard I'd say, worth its money for sure.
Ukraine will prevail!
Thank you for the support!
Greetings from Italy Miyconst!
Greetings back from Sweden!
Hi, great job as always. This one freezes on aida like other non x99/c612 Motherboards?
Yes, it does, but it's easy to fix by disabling PCH sensors reading in Aida64.
Hello, I have a MR9A PRO board, my question is what bios do you recommend to do turbo boost with mi899? I was thinking about the MR9A version but I have my doubts
I did not test the Pro version, thus I can't guarantee the compatibility, but as far as I know, it's the same motherboard, just slightly different look.
I got a mr9a v1.0 q87, is there any bios with TU to update my board? thanks!
Hello, all the features of the card continue working even using the bios of another? Sorry for the question, but I'm new to this subject.
Yes, it works better with X99-8M-F BIOS.
Hello @Miyconst, so on this MR9A, with the modified BIOS, correct me if I'm wrong but I should be able to put on a x16 NVME to PCIE expansion card with 4 x4 NVME on it and they will all work with full PCIE 3.0*4 speed ?
I cannot guarantee that. The PCI-E bifurcation should work but as with any other Chinese product it's a lottery.
Hello! Do you know if this motherboard has ARGB pins? I'm thinking of using it in the sharkoon Rev300 case. But I don't know if it will work with ARGB.
All Chinese X79/X99 motherboards don't have A-RGB pins.
Hello once again. I am looking for Turbo unlock as well, The 8M-F bios file that I would select is the Stock Huananzhi X99-8M-F, TP, TU PEI -50/50mv ? Or can the E5 2666 V3 cpu handle higher settings .rom? Which would you select with the MR9A with a 2666 V3? Thank you my friend.
I would go with -50/50, it's the safe default option.
@@Miyconst Excellent! Thank you Sir...
I just realized that the chipset that came on my MR9A is the C226 and not B85 like advertised by Machinist. Is this chipset good? What are the differences between them or it would be a problem to unlock the turbo boost in this case? I wonder that probably is not a good idea to use the 8M-F bios on the MR9A that is not a B85 chipset and a C226. Ideas? Thanks!
These two chipsets are basically the same, C226 is B85 for enterprise machines, BIOS is compatible with both.
Great review, thank you.
So, do you know which one is the appropriate motherboard (cost/benefit) for the E5 2683 v4?
I'm looking for one that support 256GB of RAM.
The 64 GB memory sticks are still very expensive, so 8 * 32 GB is the most reasonable way to get 256 GB of RAM. In this case Huananzhi X99-F8 is the way to go.
@@Miyconst oh, thanks. That's exactly what I'm looking for.
Hi,
does the board also have a 5V ARGB connector for the RGB lighting from a be quiet! - Pure Rock 2 FX ?
No, it doesn't.
Great video. Do you have any experience with the ZX-H81 boards? Got one to replace a faulty ASUS board and it does work fine, but wondering if there's any way to force an all core turbo or overclock somehow. According to CPU-Z it actually uses the server C226 chipset.
No, unfortunately the C226 chipset doesn't allow overclocking.
@@Miyconst Interesting. I had heard several vendors had allowed overclocking on H81 boards due to the release of the G3258 but I suppose this chipset may not have the same feature.
Hello sir, can this motherboard be unlocked? I mean the turbo boost capabilities? And another question did you encounter any audio issues or drivers issues? Is this one better than the huananzhi bd4? Thank you for your great content
Please watch the review, it answers all the questions. Huananzhi X99-BD4 is a slightly better board, but it costs significantly more.
Hello!!! I do you think the model MR9A pro has the same feactures and the same unlock procedure ?
Yes, I think so, but I can't guarantee that, since I did not test the board myself.
I bought an MR9A Pro, and in your review you mentioned the 8M-F BIOS. Is the MR9A's default BIOS really that bad?
My motherboard came with a really bad BIOS, but I can't speak about yours.
With the i7 5820k will the first x16 pci-e slot (which runs at x8 lanes) work with 8 lane cards like the rx 6600?
No. It doesn't.
Bought my current setup (MR9A Non-Pro, 2680v4, 2x16GB) on the strength of this review. It's surprisingly good.
I hope it's going to serve you well and for long.
Great review! Is there a max TDP rating for the CPU socket? It's obviously higher than the RS9's 120 watts, but I'm just wondering what it is exactly. Thanks.
You won't find any official ratings or measurements for these Chinese motherboards, but I would not go higher than 135 Watt, and always ensure good VRM cooling.
@@Miyconst do you think i could manage to get a e5 2687 v4 to run okay on this ?
@@motion_rq yes, it should be fine with good VRM cooling.
@@Miyconst sorry to bother but ive found only the mr9a-h, would this still be okay for my cpu or does it have to be the mr9a non h, thanks
@@motion_rq I have not tested the H version, thus there is not much I can say, the VRM heatsink looks pathetic.
Thanks for the interesting review, as well as your position and support of our country! 🇺🇦
Thank you for the support as well. 🇺🇦🇺🇦
Hallo again. I have this board. Do you have a link to that Huananzi Bios. Can i flash it via Software or is a programmer needed. Thanks for your help. I am a noob in those Chinese Motherboards.
You can use my Mi899 app to get the BIOS and flash it.
Will flashing HZ x99 8m-f BIOS and TU procedure work if it has the chipset C226? Thx!
Yes, it works, or at least it worked in my case.
First of all, thank you very much for such detailed explanations. I want to get a 1080p or 1440p gaming rig on the cheap, have a 1070ti but plan on upgrading to either a 3060 or 1080ti with time. I was looking at this motherboard and either a 2640V3 or 2666V3. I live in a VERY cold city that even in the summer doesn't ever go over 20 C and don't use heaters or air-conditioning. Which cpu would you recommend? I am very limited on second hand market here thus i will buy mostly from china/ali express.
I would surely go with E5-2666 V3, unless your budget is so tight that you need to save those extra $15.
@@Miyconst i can spare the 15 $ and thank you very much for your videos. Based on previous videos about a year or so ago i rigged up a virtualization server for my nas and other services using a Huananzhi T8 2678v3 combo that works just absolutely Great. Thank you so much for all your work and dedication and for answering my question
You are welcome and thank you for the support.
Hello, i want buy Machinist X99 MR9A but then now it have MR9A Pro, and it just like $5 more than basic MR9A.
Which one you recommend for these motherboard?
As far as I know it's exactly the same motherboard, there are only cosmetic changes.
great video man! unlike other channels you're really informative.
would i have any gpu/cpu problems like if i use a gtx 1080 or ti i wanna do a budget build with this and a 2666 v3. also does this chinese motherboard suffer the same problem of bad response time as most chinese motherboards?
There shall be no issues with E5-2666 V3 and GTX 1080 (Ti), at the moment I am working on GPU scaling benchmark so stay tuned. Response time is an X99 issue not just Chinese motherboards, but as tests have shown, it doesn't affect gaming that much.
@@Miyconst alright then! thanks for the info man you really did help me make good decisions with my budget build and i will be waiting for that vid
Just got my xeon kit with mr9a but it does not turn on, and when i jump the 24 pin connector it makes a constant beep and nothing turns on either way, do you know what it can be and how do i fix it?
Please join my Discord, send pictures and full specs, so we can help you debug the issue.
Hi,
thank you very much for your reviews.
What do you think about the MACHINIST MR9A Pro V2 ? do you plan to include this board in your listing in the Mi899 application ?
So far I don't have plans to test V2, but as far as I know, it's exactly the same board, just a different look.
@@Miyconst Thanks for answering,
I have received this board (v2) a few days ago and I am waiting to receive an E5 2696 v3.
For now I have been able to perform (thanks to your tutorials) with the dumped BIOS the TBU with undervolting -70 -50 for my current E5 2670 v3
Previously I had the Machinist RS9 with this processor and having tried the same processor on both boards I have to say that for now I don't appreciate big changes in performance, although I do in temperature
Can you suggest me the proper parameters for the undervolt of the E5-2696 v3?
@@mcrip2011 there are no universally applicable undervolting values for all CPUs, each CPU is individual, and the best value for each CPU is different. 99% of the CPUs can handle -50/50mv, 70% of the CPUs can handle -70/50, 50% of the CPUs can handle -90/50 and only about 20% can handle -100/50.
Hello! Miykonst! Great work!! Is there No slot for wifi card? Did not notice that.
No, there is no. You can use PCI-E X1 expansion WiFi card though.
Hello,
I have one question, when unlocking turbo boost for the 2666v3, using the 8M-F bios on the MR9A couldn't possibly lead to instabilities or a problem?
Thanks a lot for your work. You are the ultimate reference for the Xeon's platform. Kudos!
When using Chinese X79/X99 motherboards there is always a chance of instability. There is also a chance to get extra issues by unlocking turbo boost, but in most cases it's just fine.
Hi, do you know if this motherboard has VT-D support? I want to use this with pci passthrough.
I can't guarantee that yours or any other motherboard will be the same but mine did have VT-D.
with good cooling, do you think e5-2698v4 would be okay?
Yes, I think it should be just fine.
Thank you for the intersting review,
Plz, which Motherbord is better between x99rs and x99Mr9a pro ?
As I have said in the video, X99-MR9A is significantly better.
@@Miyconst Thanks a lot sir,
You make a great job
i jst followed recently best revies iv seen abt a motherboard. pls with this motherboard and an E5 2666 v3 cpu is turbo boost possible without touching the bios ?
Turbo Boost is possible, Turbo Boost Unlock requires BIOS modding. E5-2666 V3 with no BIOS modding goes up to 3.3 GHz on all cores, it's not bad, if you don't want to bother with BIOS update.
I really like your bla bla bla talk. I really get great quality information from your talk. Thank you.
Thank you for the support, I will try to keep some balance to don't overload, but also don't over simplify the videos.
Hello, i was not able to run my rams both quad or dual at more than 2133mhz on my X99 PR9 model (MATX model of this board). I tried manual mode and ready XMP profiles but no luck at all. Do you have any idea about this? Can you help me with this? Appreciate your hard work and thanks a lot!
What is your CPU? Most likely the CPU doesn't support any faster RAM.
Thanks for the answer. I have 2697 v3. So in this case even if we use v4 xeons the max frequency we will get 2400 mhz (according to intel official website) correct?
Great review! Do you think I would be able to use an E5-1650 V4 if I use good cooling?
E5-1650 V4 should be just fine here but never forget about VRM cooling.
@@Miyconst Awesome. I really appreciate your content. Thanks!
Hi everyone/ Miyconst, i've purchased this motherboard, but the m.2 slots are not recognising my 256gb m.2 drive from kingspec, in the bios nor in windows. Wondering if it is likely a drive problem? i've tried both the top and bottom m.2 drives but no result. Regards.
This is a very typical and well known problem, Chinese SSDs often refuse to work in the Chinese X99 motherboard, you have to get a branded SSD, such as Samsung or Crucial to test the motherboard properly.
@@Miyconst thanks mate I'll test it In another system and replace :)
Hi. I’m unclear about this aspect. If I use DDR4-2400 with a v3 E5 processor, will there be a problem?
No problems, the speed will be DDR4-1866, DDR4-2133, or DDR4-2400, depends on your CPU's limitation.
I have this board works fine but gives 2 beebs during boot but starts and functions without issue, 2 beeps parity issue?
I am not sure what those beeps mean, could be normal operating or anything else it doesn't like.
The seller replied to same question. Its normal.
Hello, dear friend, there will be two beeps when turning on the computer, which means the motherboard self-test is normal and there is no problem with the accessories.
Can i use It With the original bios Just for play games on pc? Or should I use the 8mf bios instead?
Both is fine. If you want the sleep mode and a bit better performance - flash 8M-F BIOS, if you don't want to bother / risk - keep the stock BIOS.
@@Miyconst thanks
Just saw that they reléase the PRO V2 version. Is that mobo good like this one?
I have not tested the V2 version, but it seems to be the same, just updated appearance.
I found your channel after buying the same one.
I am born and adopted from Sevastopol at age 3, I do not know my birth parents. I wish you safety and I’m thankful that I subscribed. USA 🇺🇸 Maryland here.
Welcome to the channel and thank you for the support.
Hi! can you tell me if the BIOS of the 8mf is compatible with the version e5 mr9a v1.0?
It should be compatible, but since Chinese often change their motherboard revisions with no backwards compatibility, I can't guarantee that.
@@Miyconst Hi! Passing by to inform you that the 8mf BIOS also works on the e5 mr9a v1.0 with b85 chipset
I amo happy to see that chinese Motherboards are getting better without getting more expensive
Hi! Passing by to inform you that the 8mf BIOS also works on the e5 mr9a v1.0 with b85 chipset
Thanks for the info.
oi tudo bem voce tem da placa machinista mr9d plus?
i just ordered a combo with a e5-2650 v4 32 gb ram but i really wanted to know where i could find all the drivers or should i not be worrying about that like is windows gonna install all them by default or will i have any problem can tell me where to download them (sorry for my horrible gram my main language is not english)
Windows is usually able to pick all necessarily drivers, you just need to install all updates, including the optional ones.
@@Miyconst thanks so much
Hi Miyconst! Is it still recommended to change the factory BIOS of this motherboard to X99-8M-F, TP BIOS?
Yes, I would still do that.
@@Miyconst Thank you for your reply!
One more question I want to be sure of, can I plug an M2 sata SSD into the top M2 slot?
@@istvanbodnar8710 I cannot guarantee that, the latest revisions come with two NVMe slots.
I'm bought this motherboard recently and would like to use a bios from your Mi899 tool. This video shows to use Huananzhi x99-8mf bios but mi899 says that x99-8mf has B85 chipset while my MR9A (non-pro) has Q87. you think it should work or should i not flash it? The board has exact layout compared to the MR9A you reviewed here. I'm taking responsibility, just need your opinion. Thanks!
As far as I know, B85, Q85, Q87, Z87 chipsets have intercompatible BIOS. I did such cross flashes, but of course can't guarantee that your experience will be the same.
it worked fine just how your experience was. Thanks!@@Miyconst
Posso usar a BIOS da 8MF na MR9A PRO com Chipset C226? Que medo!
@ Miyconst I recently bought a 3060M GPU which I wanted to test with this motherboard. The problem comes when starting the PC. It does not give a video signal. I have never modified its BIOS but I have doubts if modifying it would solve the problem. When the board starts it gives 8 beeps. Could you tell me if these types of boards are compatible with these motherboards? These videos are really interesting for those of us who like this type of topic. thank you.
I have never tested RTX 3060/3070M, but I know that these GPUs have compatibility and driver issues, thus I don't recommend them. Modifying the BIOS won't help here, getting a better BIOS might help, but there are non for this board.
I've had mine running in a system with good results so far, but my one issue is that the ethernet seems to cut out at random times. Especially when I'm downloading a big game. I got around this by using a USB wireless AC adapter, but it's only about 40% the speed of ethernet. Any ideas?
It seems like you have got a defective ethernet chip on the motherboard, the only option is to add a PCI-E expansion card.
@@Miyconst Thanks, I'll do that.
Looks like the new value X99 king! Still managing to build and sell X99 systems?
Every now and then I am able to sell some PCs, but the Summer has came and people wanna be outside instead of gaming, the business doesn't go very well.
Hello there. Does Machinist X99-MR9A or Machinist X99-MR9A Pro have support for Intel VT-x (hardware virtualization) or Intel vPro. Both motherboards have Chipset Intel B85. It seems they do'nt. Can anyone confirm?
The BIOS surely has the features, but whether it works properly I can't guarantee.
good night, the MR9A bios works on the MR9A PRO, the bios are the same, thank you.
Thank you for the info.
Do you think Crossfire would work with this motherboard using two compatible AMD GPU's?
Yes, it would, but it's pointless.
@@MiyconstOK thanks for reply, Miyconst!
Good Job, 🇧🇷✌🏾🙏🏾
Thanks for video i buyed this mobo and instal m.2 nvme but this mobo wil not show it in bios ore windows 11 do you know how to solve this bios settings ? Ore change jumpers on the mobo? Thanks
I need to know what SSD you have and what M.2 slot you tried.
Thank you so much for your reaction .i put the verbatim vi3000 256gb in the upper slot so the slot that is closest to the cpu cooler its showing now in bios but its not apear when inlike to instal windows 11 on it and it also not apear in diskmanage ment i have the standart american megatrend bios that came.with this mobo . Hope you can help me out.thank you@@Miyconst
@@robbiekerkhof I am not sure I can do much more in this situation, if you bring the motherboard and the SSD to me, I could test them separately, but remotely I don't know what to do.
Thanks for reply turns out the m.2 is broken the machinist mobo works great now with 2 other m.2 diks. I have another question do you know what the best xeon v3 ore v4 cpus are for gaming like 8 core with high mhz ore lower mhz but more cores and more cash memory i stil dont know what cpu is great for gaming best performence . Thanks have a great weekeind sir.
@@robbiekerkhof good job figuring the problem out. For the best CPU, please just watch my benchmark videos, there are a lot of them. Different CPUs are best in different games and/or scenarios.
Is there itx X99 out there?
Curious since 5960X is about $100-120 now
No, so far I have not seen any mITX X99 boards from China.
Hi Miyconst!
At the moment my Mr9a work with E5-2640 v3, but in the future I would like to upgrade the CPU and change the current with the E5-2667 v4.
I will use this computer for studying, watch some streaming content and emulate some PlayStation 2 games.
After reading the information above, what do you advise me? Keep the current CPU or upgrade in future?
In case of upgrade, the VRM of Mr9a can perform well without an excessive heating with 2667 v4 and without turbo boost?
Thanks a lot if you respond to this comment and thank you for your huge, high professional and useful work here on CZcams!
I would stay with E5-2640 V3 for as long as it keeps up with your tasks, then upgrade entire platform, but if you badly want to stay with X99 then E5-2667 V4 is a nice option.
@@Miyconst thank you for you opinion!
If price of 2667v4 goes to price of V3, upgrade isn't bad idea. But this give u maybe year or max two to update to new system.
Hello Miyconst! Are you recommend this rams for the Machinist X99-MR9A V1 "SAMSUNG ECC DDR4 2133Mhz" 4 x 16 GB? Thank You.
Yes, it's good RAM and should work with all Chinese motherboards.
@@Miyconst Thank you! And what about the "Samsung M393A4K40BB0-CPB0Q 32GB" this rams will work well too? With the Machinist X99-MR9A V1 motherboard? Love your content, keep it up! :)
@@BalieggmanI have very similar Samsung modules and they worked just fine with my motherboard.
@@Miyconst I'm wondering what RAM should i use in my Machinist X99-MR9A V1, and what u think about the "HMA42GR7AFR4N 2400T" Lenovo brand rams 16GB with hynix chips, they will work fine in this chinese motherboards?
Wich x99 you recommend?
hello sir, is Machinist x99 rs9 enough for e5 2640 v3?
It's okay if you ensure good VRM cooling.
@@Miyconst please make tips on how to choose the right cpu cooler for lga 2011 v3
@@amdtadho7774 it's not easy to make cooler suggestions since people in different regions have different prices and offers.
Fantastic content as always. Would you say E5-2698V3 (16C, 135 watts TDP) is a good match for this board?
E5-2698 V3 would be a bit of a stretch for this board, but I would still do it with extra fans over the VRM zone.
@@Miyconst Thanks - which CPU do you recommend as a better match ? Maybe an E5-2680V4 ? My present pc is E5-2680V2 om a Jginyue X79 board and I'd like to get some real performance increase in multii-hread use.
@@karlsonkab51 why not AM4 platform with Ryzen 5/7 CPUs?
@@Miyconst
re: Ryzen - our household already has R9-5950X - I'm old - poor health would like to have a new toy. I need to find RAM for the MR9A and 2698V3. What RAM spec do you suggest?
@@karlsonkab51 X99 is a perfect toy if you enjoy tweaking PCs. For the RAM, I would suggest to pick SK Hynix or Samsung ECC REG memory, four identical modules.
I have I7 3770S paired with gtx 1060 6gb.
I was thinking about getting a xeon setup from aliexpress. I found a motherboard machinist X99 MR9A PRO MAX. which it look promising motherboard with nearly all the features. I am aiming to 1080p gaming on 1060gb but in sometime I want to run some vr machines from time to time.
So do you think the this X99 MR9A PRO MAX paired with E5 2680 V4 and 32 gb of ram is it a good deal for 150$ or better to invest that money in high end new gen motherboard with entry level cpu like i3 or r3 ryzen cpu.
If you can afford it - go for i3-12100 or Ryzen 5 5600 with 16 GB of RAM instead. Xeon is only good of your budget is really tight.
Hello the X99 Specialist. I need your help. I blocked my Atermiter X99 with a bad timing Dram. And it hasn't reset bios. I would like buy a new motherbord. For you, wha'ts better model DDR4 ?
This video says it all: m.czcams.com/video/AW0QgQNbBwA/video.html
This seems to bem a great board, can we have reset BIOS working in it?
Yes, clear CMOS works as well.
Finally someone speaking of atually usefull informations about this motherboard.
I used this motherboard with e5 2678 v3 , 32 GB DDR4 RAM and RX 6700 XT . I unlocked TB with mi899 tool ( thanks to Konstantin for developing this miracle tool) it was working very stable . but After 3 month daily usage , mine is starting and increasing coil whine. Sound is intolerable levels at now. Is there any suggestion about fixing coil whine or buying a new motherboard ?
Are you sure this is the motherboard's coil whine? It could be your GPU or PSU. Anyway, if it's indeed the motherboard, then you are pretty much out of luck, only replacing the motherboard will fix it.
I was thinking of buying a dual xeon e5 2697 v4 with a motherboard. I have seen a bunch of them but I am still confused. Pls recommend some good dual x99 motherboard for xeon 2697 v4
Please stay away from dual socket solutions unless you really need one and you know why. In such a case I recommend Dell T7810 workstation.
Does anyone happen to know if this board supports overclocking of E5 16xx v3 CPUs?
It doesn't.
thanks
PLEASE HELP.
Hi - I have a x99 machinist mr9a PRO-V2.0 with Q87 chipset. But in the tool I only see version V.1 with chipset B85 and C226. I'll have to wait until you release that version to do the turbo boost???? The PC is for my daughter and I would like her to have it as well as possible. Thank you very much
I don't plan to test the other revisions of MR9A for now, but as far as I know, the only difference is the looks.
@@Miyconst hello. thanks for answering. In your program there is version 1.0 that corresponds to the b85 and c226 chipset but in mine, which is newer, it is version 2.0 that has the Q87 chipset and I am afraid of installing the version 1.0 and the board will break. What I can do ?? thank you very much for what you do teacher
@@JORGENEO1983 if you are afraid - leave it alone, if you are eager to tweak - get yourself a CH341A, do a backup of the existing BIOS and try mine.
Does the BIOS allow for a Windows XP install? Or which motherboards do?
Sorry, I don't know.
@@Miyconst 50% in Armenia apparently are Windows XP PCs.
@@prep0wer for real? :O
Whats the maximum 2011-3 CPU that this Motherboard can handle?
It can handle the 2666 v3?
It depends on your chassis cooling, but E5-2690 V3 should not be an issue either.
i got a E5-2097A V4 init 16 cores 32 thr.
thanks for video, i'm going to buy mr9a pro with a xeon 2699 v3, can you reccomended me a graphic card for this setup?
What this PC is for?
@@Miyconst i didn't notice your answer until today that im watching this video again X), thanks for your content, yesterday i recivied my Xeon 2696 v3 + mr9a PRO, im using my old graphic card, gt 630 hehe, my goal is install linux on this pc for create multiple virtual machines with linux QEMU/Kvm.
currently i'd intalled windows 10 for test that all is working and i dont know if is a good idea flash the bios for your modified bios before switch to linux, i readed on another comment that you bios work too on MR9A PRO, can you advise me? and thank you very much
@@sebastiansossa6834 I have not tested MR9A Pro myself, but they say it's exactly the same motherboard, just a slightly different look, so the BIOS should be compatible. Still, if you plan to run Linux, I would not recommend to use Turbo Unlocked BIOS, just use the stock X99-8M-F BIOS.
@@Miyconst ty very much, i will
Does anyone know if the MACHINIST MR9A PRO MAX (black and red board )is based on the same construction as the reviewed MR9A board or is it similar to the MR9D board.? D for Disaster .
I have not tested the motherboard, thus I am not sure, but you can check the chipset. If it's C612/X99 - it's based on MR9D-isaster.
@@Miyconst Thankyou for the tip . Listed as B85 chipset then read specs and claims South Bridge: Q87 Chipset series so maybe pot luck either one.
My latest is Huananzhi X99 BD4 with a Xeon E5-2697v3, a 14 core CPU and I have as a direct comparison, the same CPU in a Gigabyte X99 SLI board. Repeated testing with CPU-Z and an old version of Cinebench (20), the Huananzhi board is producing almost identical timings to the Gigabyte board. I am running a large water cooler on the Huananzhi and thrashing it with video compression, it stabilises at 50 to 55c and does not creep higher over a bit under 1 hour. Stock 2697v3 runs at just under 3.6 gig on low core usage and drops to 2.9 gig on all cores. PS : Glad to see you are safe. I can only hope the miseries end.
Top notch comment right here.
I got a x99 evga FTW For 64$ and I want to build a 4k gaming pc with a 3080. Do you recommend this cpu for it? $119.00 on ebay. Or should I do a 5820k for 40$ on ebay?
This is which Xeon? I would probably aim to get E5-1660 V3, it has eight cores and can be overclocked.
@@Miyconst I'm sorry. which cpu is the best option for 4k( RtX 3080). 5820K FOR 40$. 2097v3 for 65$. 2090v3 for 70$ or the 1660v3 for 75$ ?
@@misaelperez1077 I would go with E5-1660 V3.
we want ddr3 version of this! so nice for 2666 v3
Yes, that would have been a steal deal.