2001-2017 Honda Gold Wing Motodynamic Full LED Projector Head with Switchback Signals Installation
Vložit
- čas přidán 13. 09. 2022
- Full step by step guide on how to install our full LED projection head light with DRL and switchback turn signals for the 2001-2017 Honda Gold Wing. Purchase link below.
Purchase here:
www.motodynamic.com/2001-2017... - Auta a dopravní prostředky
Just installed mine on my 2023 cbr600rr. Thank you so much for the installation video! This made everything a breeze and shipping came in fast🏎️
After watching this video, I decided to buy these headlights 😊.
Can't wait to get them!
Amazingly detailed install. Great work!
At $700.00 plus all the work I too am staying stock.
The upper front nose faring and the windscreen retaining bracket can be removed as a complete unit. No need to dissemble these two parts. Just use a plastic pry tool and pry up the front nose out of the two grommets. Remove the two nuts under the left and right mirrors. Raise the front of the faring enough to remove the center bolt behind the plastic flap. You can then left and remove the assembly as one unit. PS: Place a rag in the hole under each of the mirrors so as not to lose a nut if you should drop one.
Thanks for the suggestion. The bolt under the flap is difficult to reach without removing the front nose fairing first. Unless you have specialized tools to reach in and know exactly the position of the bolt, it would be easier to remove them separately.
Excellent step by step instruction vid, thank you.
Bloody awesome. I need this in my life.
I’m totally sold.
Installed on my 2013 F6B. Looks awesome and unique!!
Awesome looking lights!
I would sure like to see some real world video of these in action.
Nice video, well crafted. I guess an alternative is to not ride at night, which is my usual choice.
Sehr gut erklärt und alles deutlich gezeigt supper
Those are bad ass. Must have them
By joe, I think he did it! Excellent video, but over my head.
Looks great 👍
Please let me know where I can purchase it?
You can go here to purchase it: www.motodynamic.com/2001-2017-honda-gold-wing-full-led-projector-head-light-with-drl-and-switchback-signals.html
Wouldn't it be cheaper to put LED lights in your original headlight assemblies 700 + is a little high
Yes, it would be cheaper but likely the LED is not designed for reflection type head lights on the Gold Wings and may not focus the output properly. It will also vary on the brand of LEDs too.
Thats actually cheap when you consider the price of just a single OEM headlight housing by itself.
As someone who's into car LED lighting bussines from very begining (since 2004.) and with 30+yrs of experience in electronics, I've got a question if I may?
How did you solve or did you solve heating issues of a LED cluster inside a headlight assy? I see you're using standard generic ABS encapsulation for a LED headlights and there's no visible heatsinks or cooling fans. What is operating temperature for those headlights and how you handle warranty in case of failure caused by overheating issues?
Thank you in advance for your honest answer.
We use a massive aluminum heatsink inside that the LED boards are attached directly to. The heatsinks have cooling fins that dissipate the heat adequately. I do not know the operating temps off the top of my head but we ran our burn in longevity test for 1 week straight and the temps were within the operating temps of the LEDs. We have had zero issues with overheating so far. In the case of warranty, we will replace the unit for you at no cost within the warranty period.
@@motodynamic thanks for the details and for getting back so quick.
Will the led lights cause radio (RF) interference
We have tested it with the factory Honda radio and antenna system and there are no issues with radio interference.
any Christmas specials ?
Yes, check out our IG or FB page for details
Are these DOT approved?
Yes, these are DOT approved
What about bulb replacement
Bulbs are not used, the LEDs are soldered directly to the circuit board and are not replaceable.
@@motodynamic ok thanks for the info but what is the life of the bulbs what do you in case of bulb failure
@@tbonesz1 Bulb life is very long, will likely outlast the bike as long as the temperature is controlled properly, which is why we use a massive aluminum heat sink inside. In the case of failure, we will replace the entire unit within warranty. Most cases of failure of LEDs is overvoltage from the bike exceeding the threshold of our voltage regulator.
I'm dyslexic and ADD, nightmare job for me, very nice lights though. 🤣🤣🤣🤣
Can you purchase this headlights in Canada ?
You can reach out to our distributor in Canada to see if they can order it for you www.motostarz.ca
Can you purchase these lights in The Netherlands.
The closest distributor we have to you is in France. You can reach out to them to see if they can order the item for you contact@tech2roo.com
@@motodynamic Is it the same for Germany? I'm living in Germany and want to order it.
@@goldwing_channel A customer from France has installed it successfully so likely it will work in Germany too.
Way too much work for me to tackle. I'll stick with stock.
After watching this video, I decided to keep my old headlights. Too much work just to look good.😅
I agree it's a lot of work to install it but we believe it is worth it in the end.