How to remove rear bumper off bmw Z3 1996-01

Be sure to support our channel via purchasing pre-owned bmw parts at our website www.bimmermerch... or by making a donation to our Venmo Account @Wil-Gonzalez-2. Thank you.
Welcome Back, In this tutorial, we will be showing how to remove rear bumper off a 2000 BMW Z3 Roadster along with the required tools. We encourage everyone to watch entire video prior to starting removal process. Thanks for watching
Quality pre-owned bmw parts
www.bimmermerch...

[@31acruz]

Excellent job! straight, to the point with all the techincal info needed, no extras, no bullshit, no comedy act, no "I will tell you about my life" BS, good job!

[@bimmermerchant]

Thank you for watching our DIY Video. Hope it was helpful for you. And Thank you for a wonderful feedback. Feel free to share our channel to anyone that you may feel will benefit from it.

[@gixxerhoff7502]

This video is a wet dream. I wish it was this easy. There are a thousand of the strongest pop rivets you have ever encountered you have to remove. Some of which you have to remove the tail lights to get to

[@DaytonCarCare]

There are two long main bolts (use hex tool) they secure the bumper to the bumper shocks. You access those from under the car. Also you can just unplug the license plate lights. You don't have to remove the 6 bolts securing the two bumper shocks to the chassis as shown in the video.

[@juangambia7214]

Please do a center console removal plz

[@Pelushkin]

Great job! do you know how to remove the license plate from that bumper?

[@ukisout2181]

Great video my right side has popped out, cheers.

[@AlanValentine]

at 3:45, see along the top left edge of the bumper as it's removed, there are two keyhole-shaped holes that secure it via clips, the idea being , if I'm not mistaken, that you could slide the bumper to where the clip aligns with the large hole and then it will drop through the clip, but I can't understand why the 'hole' part of the keyhole is towards the back, since you would have to push the bumper _forward_ in order for it to drop? and even after removing arch liners, I can't push the bumper forward into the car or pull it back. have removed the 3 major bolts each side, and the smaller 2 8mm ones underneath too, and removed the rear lights.