Had this lift installed by the guy that makes them. $1500!! Within a few months, lots is shudder due to wrecking my CV joints. Several mechanics said that the lift was creating a very stressful angle on the CV joints. Problem would recur. Got it removed. Expensive learning experience.
Very glad for you. What’s the source of info that pre 2021 sierra are more prone to problems after a lift? Older cars have older parts or is someone claiming it’s the design?
@@RobertHughes-mu8hy Ya pretty interesting, wonder if they changed the cv's so they have more range of motion? or something simple like that, to most people there would never be a difference but when lifted its huge.
I had a 2006 with a Journey's lift on it..loved it other than the fact it wore out 2 sets of (factory, not aftermarket..ouch!) CV axles within 40k miles..we are looking at a 2015 and your video is fantastic for giving us an idea on what we may be facing..thank you!
Thank you for the kind words! I tried might not be entertaining but I wanted you all to be able to see step by step. These newer cv’s seem like they should have some more travel, doesn’t seem maxed at all.
Three questions! - Is it still safe? - does if affect gas mileage? - how much wear are you putting on the drive shaft with the new angle? Bonus question: With the control arm lower, do you feel the bumps more?
Thanks for stopping by! Totally still safe, this keeps all the factory components and just lifts them higher. It did affect mileage a little bit, but it will also depend on what tires you run and other factors. This is still in the motion of where the driveshafts were designed to be run, Shouldn't add any wear. Other than larger tires affect on overall vehicle if you go that route. The van rides the same as factory, because all of the components are factory just pushed out a bit.
Yes, you’re always going to have compromise with lifting this type of vehicle. As stated in the video the engineers really didn’t design this van with lifting in mind…. But it’s cool 😎
Had this lift installed by the guy that makes them. $1500!! Within a few months, lots is shudder due to wrecking my CV joints. Several mechanics said that the lift was creating a very stressful angle on the CV joints. Problem would recur. Got it removed. Expensive learning experience.
Dang that’s a bummer, we have had this on for 7 months and lots of trips, zero issues so far😎
50,000 miles on my 2022 w 3 inch lift, 31 inch tires, and no problems at all. Pre 2021 siennas are more prone to problems when lifting.
Very glad for you.
What’s the source of info that pre 2021 sierra are more prone to problems after a lift? Older cars have older parts or is someone claiming it’s the design?
@@dario8841 Interesting, glad to hear another success!
@@RobertHughes-mu8hy Ya pretty interesting, wonder if they changed the cv's so they have more range of motion? or something simple like that, to most people there would never be a difference but when lifted its huge.
Thanks!
Wow thank you! glad to help.
I had a 2006 with a Journey's lift on it..loved it other than the fact it wore out 2 sets of (factory, not aftermarket..ouch!) CV axles within 40k miles..we are looking at a 2015 and your video is fantastic for giving us an idea on what we may be facing..thank you!
Thank you for the kind words! I tried might not be entertaining but I wanted you all to be able to see step by step. These newer cv’s seem like they should have some more travel, doesn’t seem maxed at all.
Thanks for helping me finally decide that lifting my Sienna is a bad idea. My Sienna is simply just not designed for off-roading. Whooda thunk?
Its not, its designed as a good family hauler. But its not going to wreck it to give it some ground clearance!
Sweet 😋 Now, all you need is a Grave Digger wrap job, and you are all set 😜
HAHA love that!
I’m not brave enough to do this, lol. I’ll take mine to a shop to have it done. Great video though, thanks!
Hey no shame in that, atleast know you’ll know what they have to do!
This is awesome thank you
Glad to help! Thank you for watching, don't for get to subscribe!
Three questions!
- Is it still safe?
- does if affect gas mileage?
- how much wear are you putting on the drive shaft with the new angle?
Bonus question:
With the control arm lower, do you feel the bumps more?
Thanks for stopping by!
Totally still safe, this keeps all the factory components and just lifts them higher.
It did affect mileage a little bit, but it will also depend on what tires you run and other factors.
This is still in the motion of where the driveshafts were designed to be run, Shouldn't add any wear. Other than larger tires affect on overall vehicle if you go that route.
The van rides the same as factory, because all of the components are factory just pushed out a bit.
Look . I know you're already thinking it.. Your gonna bob it.😂
We told him we knew some folks who could bob it... he declined🙃
Seems like some do OK, but the “stern” will be at a lower angle. Also, only some parts of the van are raised.
Yes, you’re always going to have compromise with lifting this type of vehicle. As stated in the video the engineers really didn’t design this van with lifting in mind…. But it’s cool 😎
How many times it takes you to complete all of that ?
Thanks for the video !
This lift was installed fully in like 8 hrs
Lose the gay music
thanks for Watching an commenting! I wish I could figure out how to get cool music, Copyright makes that super hard to work around.
wintergatan or no music.
Just don't put any music @@Geeks4x4
Ya? Silence when I’m sped up? Or the gibberish that the camera audio is?
music was super gay and unappealing, this video would have been much better without it.
Thanks for the input, hopefully my bad video still helped you out😎
@@Geeks4x4i don't own a minivan came to see the finished product but no footage of it
Well thanks for checking it out. Trying to show the install in this vid😎