GTT to GTR Conversion Parts

Sdílet
Vložit
  • čas přidán 28. 06. 2024
  • Welcome back guys! The Skyline is finally home and it's about time to start working on it. Today we are going to go over the plan for this car and all of the parts we have been stacking over the past few years to complete this build. We are going to start by installing some simple replacement parts like the reverse lights and turn signals, as well as going over where we got everything from.
    AUXITO 15% OFF Promo Code: DOYOURBEST
    www.auxito.com/4CHp9ObNpou2rv
    ---- Apparel ----
    www.kopihq.com/
    ---- Materials Used ----
    Chemical Guys Spray Wax: amzn.to/3utqwtD
    Carbon Fiber Parts: seiboncarbon.com/
    Nissanparts.CC
    trust-kikaku.myshopify.com/
    ---- Contents In This Video ----
    00:00 Intro
    16:27 How to Replace Reverse Lights on R34 Skyline
    18:00 Replacing Recaro Seat on R34 Skyline
    21:18 Removing Nismo Headlight Eyelid Covers
    22:47 Replacing Turning Lights on R34 Skyline
    24:52 Outro
    ---- My Film Gear ----
    Sony Alpha A6100: amzn.to/3D2pVPL
    Lume Cube Portable Lighting: amzn.to/3JtW2dw
    Rode VideoMic Camera Microphone: amzn.to/3tz5yGV
    DJI Ronin-SC - Camera Stabilizer: amzn.to/352wF3w
    ---- Music Used ----
    www.epidemicsound.com/referra...
    • 藍坊主「スプーン」MV
    * I may earn a bit of commission if you use the product links above to help me keep on making videos for you, so thank you!
    #skyline #r34 #jdm #carparts #nismo #rb25det #turbo #savethemanuals
  • Auta a dopravní prostředky

Komentáře • 30

  • @markpelder
    @markpelder Před 2 měsíci +2

    It's nice to see someone go for an actual rear fender swap instead of the cheap fiber glass options. I'm about to do the same thing, so I'm really looking forward to your end results.

    • @Garage23
      @Garage23  Před 2 měsíci

      Agreed, this is the only way to do it in my opinion.👌

  • @tonyv5389
    @tonyv5389 Před 7 měsíci +3

    Hey dude, that's awesome! I found your channel while rebuilding my cd009. It's good to see you doing good! It will be cool to see the conversion come to fruition👍

    • @Garage23
      @Garage23  Před 7 měsíci +1

      Thanks man! Still haven't really decided what to put that motor and trans in 😅

  • @JasonCabrera
    @JasonCabrera Před 7 měsíci

    Badass build

  • @Andy-hy6ml
    @Andy-hy6ml Před 4 měsíci +1

    building mine in arizona as well!

    • @Garage23
      @Garage23  Před 4 měsíci

      Sick! hope to see you around!

  • @jaker2731
    @jaker2731 Před 4 měsíci

    Doing the same in Australia, if you are worried about the s14 subframe grab a r34 GT subframe, should be cheap and no Hicas.
    Also running a oem front bar also, agree it looks better

    • @Garage23
      @Garage23  Před 4 měsíci +1

      I didn’t know that! I’ll keep that in mind if the S14 one doesn’t fit 👍

  • @juicydetailsaz623
    @juicydetailsaz623 Před 6 měsíci +1

    I want that Versa shirt. I used to drive a slammed Versa

    • @Garage23
      @Garage23  Před 5 měsíci

      We got it from kopimart.com but their website is down at the moment. you can follow their IG @kopimart_247 for updates. 👍

  • @salrizzo3016
    @salrizzo3016 Před 7 měsíci

    You should go Motek And they have a screen for the GTR screen and there’s also programming to look like updated info like the GTR would be sick

    • @Garage23
      @Garage23  Před 7 měsíci

      Motec is a bit out of budget for us right now but we would definitely love to do that at some point.

  • @MemosGarageAZ
    @MemosGarageAZ Před 6 měsíci

    Sick bro 😈

    • @Garage23
      @Garage23  Před 6 měsíci +1

      thanks man!

    • @MemosGarageAZ
      @MemosGarageAZ Před 6 měsíci

      @@Garage23 No problem, thanks for sharing the experience.

  • @projectx1372
    @projectx1372 Před 17 dny

    I did this conversion over 15 years ago cutting those rear arches didn’t feel right at all but was definitely worth it with the end result. Parts were a lot cheaper back then to I did the oem r34 gtr motor, interior and exterior but kept the rwd and 5 speed transmission. The r34 seats needed a little modification as the floor plan is different dew to the transmission tunnel on the gtr, apart from that most bits are bolt on. Did you get the raised fender supports ?

    • @Garage23
      @Garage23  Před 17 dny

      That's awesome, definitely not a cheap endeavor at the moment. I was able to skip on te fender risers as the Z Tune style fenders have it built in. Which was great because they wouldn't have fit in my luggage at the time 😅

  • @MikeCOD
    @MikeCOD Před 3 měsíci

    Hey bro, I’m also looking on getting GTR rear panels for my GTT. What size are the oem gtr rear fenders? 30mm?

    • @Garage23
      @Garage23  Před 3 měsíci

      They're more like 60mm, i don't really have a way to measure the difference accurately but it's at least 2 inches

  • @kent4786
    @kent4786 Před 3 měsíci

    Wait, MFD cover? How are you gonna install that?

    • @Garage23
      @Garage23  Před 3 měsíci +1

      Grid Racing offers a kind of gauge display that replaces the MFD, kind of like a defi gauge system but with a screen

  • @jdmskunk2
    @jdmskunk2 Před 2 měsíci

    How much you want for those rain, gaurds?

    • @Garage23
      @Garage23  Před 2 měsíci

      I literally just broke one in half pushing the car out of the garage 🫠

  • @MarkMark-un5vy
    @MarkMark-un5vy Před 6 měsíci

    Where did you buy the rear quarter panels? 😯

    • @Garage23
      @Garage23  Před 5 měsíci +1

      Got them from Trust Kikaku, they're the best to deal with through the whole process and they have an office in long beach now.

    • @MarkMark-un5vy
      @MarkMark-un5vy Před 5 měsíci

      Ah thanks man that's a huge help I appreciate it! It feels overwhelming especially when you don't know where to begin to look lol I can't wait to see your uploads on your GTT to GTR conversion!

  • @Fah-Qbitch
    @Fah-Qbitch Před 7 měsíci

    Are you gonna sell the front bumper, if so how much?

    • @Garage23
      @Garage23  Před 7 měsíci

      I've seen a few listings from 1200$ to 1500$ for the front bumper so I'll probably list it for 1000$