How to install Metal Roofing 3ft panels-ASC Building Products

Sdílet
Vložit
  • čas přidán 25. 01. 2021
  • Our Metal Roofing Installation Video demonstrates the installation of light gauge, exposed fastener, residential, agricultural, and commercial metal roofing.
  • Jak na to + styl

Komentáře • 255

  • @michalefrancia5710
    @michalefrancia5710 Před rokem +306

    For me, the ideas in czcams.com/users/postUgkxy_pn55PK60wAV3X_C_RoLS_67mNonoCE Plans were a starting point for building different sheds . Ryan gives ideas that allow an individual to draw nicest conclusions into the design and building of his or her own shed.

  • @williambradfordbaldwin4386

    This is the best comprehensive video on steel roofing I have seen! It very hard to find any guidance at all when I was roofing, I did nit all the details shown in this video but my roofs were guaranteed! Thank you!

  • @AVOWIRENEWS
    @AVOWIRENEWS Před 4 měsíci +1

    Installing metal roofing is such a practical and long-lasting choice for a home! Those 3ft panels from ASC Building Products must give a sleek and modern look, and the durability of metal roofing means less worry about replacements or repairs for years to come. It's great to see people taking on these kinds of home improvement projects. Keep up the fantastic work! 🏡🔨✨

  • @LeeWolff-qw9xj
    @LeeWolff-qw9xj Před rokem +3

    VERY HELPFUL! Very professionally done. This showed me the remaining add-on that I didn't know what to do about. Thanks!

  • @Jeff82556
    @Jeff82556 Před rokem +21

    Thanks for this detailed excellent video. It was very clear and concise with no fluff or wasted time. THUMBS UP for sure!

  • @jaredh9463
    @jaredh9463 Před rokem +6

    This video is excellent. It doesn't cover every scenario and doesn't cover standing seam roofing, but it is the best tutorial I've ever seen on doing exposed fastener metal roofing.

    • @bertdiver3708
      @bertdiver3708 Před rokem

      There is a video for standing seam. It is great just like this one.

  • @slyerit
    @slyerit Před rokem +2

    This is the best installation video that i was looking for Thank You very much

  • @user-si6ku3zy2s
    @user-si6ku3zy2s Před rokem

    Благодарю! Отличная видеоинструкция по монтажу металлопрофиля, инструкция как должно быть! 🙂👍👍👍🤝

    • @robertbutler8004
      @robertbutler8004 Před 7 měsíci

      @user-si6ku32s no if you are serious in seeing the best way to fix metal roof sheeting then checkout how the Australians do it.

  • @FindingMoralValues
    @FindingMoralValues Před rokem

    this is an awesome video. Thank you for doing this.

  • @punaheleboy
    @punaheleboy Před 2 lety

    Watched the whole video. Thank you

  • @midfutballr
    @midfutballr Před 2 lety +2

    Thanks for posting.

  • @MonKordelinfoTv
    @MonKordelinfoTv Před 3 lety +4

    Very important information... this is roof construction... beautiful result... this video is noted in my work project... thanks for sharing. Monkordel

  • @chrisalister2297
    @chrisalister2297 Před měsícem

    Great video! Most helpful for DIYers!

  • @mattkent655
    @mattkent655 Před 11 měsíci

    You have some really awesome products in your part of the world

  • @luisgullermorojas3632
    @luisgullermorojas3632 Před 2 lety +2

    Excellent very thermal cover and easy to install especially in tropical climates.

  • @fergferguson7370
    @fergferguson7370 Před 8 dny

    Good video jimmy👌🏻

  • @deanguando1335
    @deanguando1335 Před 2 lety

    Very good instructional video.

  • @laaljotsingh6141
    @laaljotsingh6141 Před 2 lety +2

    THANK YOU VERY GOOD INFORMATION GOD BLESS

  • @jamfork3871
    @jamfork3871 Před rokem +7

    I use 2" screws and screw down on the rib. I go with the theory of build your home on a hill out of the water not in a valley where the water flows. Skip the mastic and use Lexel clear silicone!

    • @thewayidoit8895
      @thewayidoit8895 Před 7 měsíci

      Lexel isn't silicone. They abandoned screwing on the rib in my area many many years ago. I believe there is too much deflection there.

  • @bps7209
    @bps7209 Před rokem

    Very well done, so i subscribed.

  • @passmorechabinga6943
    @passmorechabinga6943 Před 11 měsíci +1

    Well detailed thanks

  • @rudyflores516
    @rudyflores516 Před 3 lety

    Nice work 👌👍👍💪

  • @user-ih7ku3ig6c
    @user-ih7ku3ig6c Před rokem

    Great video....

  • @jpbroadcast2671
    @jpbroadcast2671 Před 2 lety

    Thanks 4 sharing 👍

  • @Mike_from_Canmore
    @Mike_from_Canmore Před dnem

    ME: Yawn. Time for bed. We have school tomorrow.
    BRAIN: lol no. we're going watch a video about a green roof
    ME: ok

  • @KpxUrz5745
    @KpxUrz5745 Před rokem +5

    In reply to Mak Flan, and to further describe points I made earlier:
    First, I daresay that if one hires a company to install a metal roof, most likely not a single worker in their crew has ever actually watched and learned all the details and countless steps shown here to properly install metal roofs. Instead, most workers are young and inexperienced, and most of them just "learn on the job" when a co-worker says something like "just snip and bend the ends in", because the more experienced worker does not know how it should be correctly done either. Even if an installer does know the more correct way to do something, almost all installers will take shocking shortcuts just to save time and effort, thinking correctly that "the homeowner will never know the difference".
    Only, here is the problem: the homeowner WILL find out the difference when future problems and leaks occur. And mark my word, roofing installers will never return to fix improper work. In my true experience they simply stop taking your calls.
    This video shows an amazing array of many dozens of fine points required to properly install. Typical roofers simply don't care to follow all these confusing instructions, and when they encounter various snags or problems they will usually just "work over it", meaning not correct the problem and just hide it quickly and move on. This usually has the effect of leaving lots of areas that will leak, especially during winds and storms, and may not be noticed early on.
    In my experience, most instances of flashing will not be handled correctly. I could now write a whole book about all the poor installation procedures and omissions I have realized that roofers did. Here is the point: almost all roofers are NOT particularly educated or consciencious in their workmanship. They simply want to make the big money and move on to the next job. Problems left and created by roofers are often not easily fixed.
    For example, I currently have some roof leaks and after months and even years of searching, have not been able to find a roofer willing to try to solve the leaks in a shingle roof. One very experienced roofer got on his ladder, climbed up, came down, and was unwilling to attempt the repair regardless of agreed price. Why? Because roof leaks are often not so easy to identify. Besides, "repairs" typically do not pay as well as installing a whole knew roof, and they want to make the "big, easy money". They usually seek to do only ranch house roofs: extremely easy roofs with no complications. I am sure the next time I get a new roof it will cost over $20,000, and I dread that day because I have been through that unpleasant experience before, and it seems that roofers often create more problems than they solve. And, I just know that installing metal roofs has much more room for error and improper methods than shingle roofs do. Either way, it is about impossible to luck up finding a qualified and diligent roofing team.

    • @Sum-Ting-Wong71
      @Sum-Ting-Wong71 Před 3 měsíci

      I was a professional roofer for over 25 years installing everything from large commercial systems to highly customized niche residential applications and everything in between. One of our many specialties was installing metal roofing and we not only had the knowledge, expertise, and skilled manpower to do the job from start to finish, but all of the necessary tools and equipment to fabricate from coil and flat stock every piece involved in the process. I had the pleasure to work with some of the best in the business and if one of our installs failed it would only have been the result of an F5 tornado or an airstrike.
      I can also tell you that if I was going to spend the money on a metal roof, I would much rather prefer to have a standing seam roof installed over this system due to the lack of exposed fasteners involved, which will all be future failure points on this roof. The rubber gaskets on these screws have a u.v. resistant coating embedded into them but even with proper torque when installed, they will only last so long. In 15 years or so, you would have to either replace every screw or clean, prep and spray the entire roof with an elastomeric coating to prevent the eventual leaks that would inevitably arise.
      You have to due your due diligence and like anything you get what you pay for, and quality isn't cheap.
      I personally cannot stand most salesmen as they know next to nothing about the product they are selling while promising you the moon in the pursuit of a fat commission. I would personally want to meet and speak directly with the owner of the company, see examples of his work, scope out his place of business, and see what type of ship he runs firsthand before I ever committed myself to a legally binding contract.
      Best of luck to you.

    • @KpxUrz5745
      @KpxUrz5745 Před 3 měsíci +1

      @@Sum-Ting-Wong71 Thank you for taking the time to write your thorough and helpful reply.

    • @mengiequirante2460
      @mengiequirante2460 Před měsícem

      @@Sum-Ting-Wong71you seem to be telling us something important but it was quite long winding and I was lost. Can you please go directly to what is it you’re trying to say. Which is better and why 🙏

    • @Sum-Ting-Wong71
      @Sum-Ting-Wong71 Před měsícem

      @@mengiequirante2460
      You seem to be trying to grasp something outside of your ability to comprehend.

    • @mengiequirante2460
      @mengiequirante2460 Před měsícem

      @@Sum-Ting-Wong71 that’s neat 🤣

  • @jfgalindoo
    @jfgalindoo Před 6 měsíci

    Just beautiful.

  • @heraldlee8112
    @heraldlee8112 Před 2 lety

    Thanx for the info

  • @dwfflowers1965
    @dwfflowers1965 Před rokem

    On the drip edge you are supposed to notch the drip on the first piece that is installed, caulk that one then the next open the hem put it in position then roll it into place making it easier and you wont plow the caulking.

  • @kismofer1
    @kismofer1 Před 2 lety

    I watched it 👀 like 30 times 👍

  • @paulkramer4176
    @paulkramer4176 Před rokem

    I like ASC roofing, but I've only done a couple with these type panels. I prefer their Design Span standing seam, but, it is more expensive.

  • @twotone3426
    @twotone3426 Před rokem +7

    The underlayment should be installed OVER the drip edge flashing at the eaves and under the drip edge flashing at the rake.... at least its code in the North to ensure water from ice damming doesn't flow between and rot the fascia board.

    • @trippyvortex
      @trippyvortex Před rokem

      Seems like the underlayment at the valley should be laid down first also for ultimate drainage purposes.

    • @trippyvortex
      @trippyvortex Před rokem

      @@gary7708 10-4 😎

  • @mikeznel6048
    @mikeznel6048 Před 3 lety +7

    I wish I could afford a nice roof like this for my 12'x16' shed. It'd last forever and look so nice.

    • @livetoridecando
      @livetoridecando Před 3 lety +2

      I once bought a package from a lumber store that was special ordered. A deposit was paid but, it was not picked up. I just paid the difference. There was some pieces that I could not use but it was still worth buying at the reduced price.

    • @MandiriPlafond
      @MandiriPlafond Před 2 lety

      sehr interessant ☕🔔✓

    • @SolarizeYourLife
      @SolarizeYourLife Před 2 lety +1

      Only if you replace exposed screws every 5 years...

    • @jg3233
      @jg3233 Před 8 měsíci

      Have you got your roof yet? I’m very affordable

  • @sammyspaniel6054
    @sammyspaniel6054 Před 3 lety

    This made my head hurt. Not gonna lie. But this is my preferred roof of choice and I will be installing one soon. I'll just take my time and do it right.

  • @user-le6te5tc2j
    @user-le6te5tc2j Před rokem

    好清楚...讚

  • @Cozcacuauhtli
    @Cozcacuauhtli Před rokem

    thanks for sharing

  • @bestproducts1961
    @bestproducts1961 Před rokem

    I agree leaks happen placing screws in valleys.

  • @MurDocInc
    @MurDocInc Před 3 lety +6

    Great video!, you have one for standing seam by any chance?

  • @Kreasibajaringan
    @Kreasibajaringan Před rokem

    Verry good👍, thank's for vidios, verry important for me,

  • @wendyting329
    @wendyting329 Před 2 lety

    can the back piece not be used so that this could be bumped against a door to make an entryway?

  • @fullmoon2050
    @fullmoon2050 Před 7 měsíci

    Thank you 😊

  • @AD-cy7wx
    @AD-cy7wx Před rokem +6

    If possible I HIGHLY recommend installing these on top of 3/4” wood strips to maximize air ventilation under the metal. 👍👍 if there was a practical way to install solar panels on this roof vs standing seam I would use more of it but standing seam is much better for solar panel clamps.

    • @w6p7a
      @w6p7a Před rokem

      How far apart would you put the woods strips? Wouldn’t you be worried about it caving in in the air gaps from snow or if you have to walk up on your roof?

    • @GabrielGonzalez-ge5ki
      @GabrielGonzalez-ge5ki Před rokem +1

      @@w6p7a you’re supposed to do it every 24” I’ve seen some videos of people doing it 40” apart but that’s where the problem with snow weight and other factors would come in and cave in the metal. I wouldn’t recommend do in it more than 30” apart

    • @davidrussell8795
      @davidrussell8795 Před rokem +4

      There would be no air ventilation if the steel is sealed off!

  • @lesflynn2392
    @lesflynn2392 Před 2 lety +1

    Use the 6' x 8' x 10' squaring method .

  • @rameshpram1444
    @rameshpram1444 Před rokem

    Thank you

  • @Anna.Jingguanjia
    @Anna.Jingguanjia Před měsícem

    good job

  • @labourisnotinvain
    @labourisnotinvain Před rokem +1

    it would be proper to place and install screw out of the groove because the water will finds a hole to leak in when a heavy downpour occurs

  • @ajf4461
    @ajf4461 Před 4 měsíci

    With proper self stick water barrier laid first, screw will be sealed by under layment. In case of washer failure wood should still be protected

  • @manfredvonrichthofen4738

    that works thx.

  • @phunglee9801
    @phunglee9801 Před 2 lety

    👍👍👍

  • @jannicks.1685
    @jannicks.1685 Před rokem

    Hello,
    Could you be so kind and tell me the name of the animation software that was used for this excellent video?
    Thanks in advance.

  • @dennyinventura
    @dennyinventura Před 2 lety

    Because of the fires in the California I don't want vents under the eve.
    Do you have a video showing a "Fire Proof" Roofing System for a HIP roof ?
    I will have a "Vulcan Vent" on the roof and a "Vulcan Vent" at ground to have "cross ventilation" in the attic.
    It's so sad to see all those people everywhere that lost their homes !

  • @chrismorrow4269
    @chrismorrow4269 Před 3 lety +1

    Correct way

  • @poland1170
    @poland1170 Před rokem

    tnx.

  • @mcbalitofarmtv4710
    @mcbalitofarmtv4710 Před 9 měsíci

    Excelent method

  • @dennyinventura
    @dennyinventura Před 2 lety +2

    Your video is absolutely fantastic !
    Because of the fires in the California I don't want vents under the eve.
    Do you have a video showing a "Fire Proof" Roofing System for a HIP roof ?
    I will have a "Vulcan Vent" on the roof and a "Vulcan Vent" at ground to have "cross ventilation" in the attic.
    It's so sad to see all those people everywhere that lost their homes !
    Have a great day ...

  • @stevenmorris3181
    @stevenmorris3181 Před rokem +1

    Plumbing vents are the major left out part

  • @nathanhale5455
    @nathanhale5455 Před 10 dny

    I just purchased a 4 year old home with a metal roof & on the rear section of the roof, the first row of screws horizontally begin 29 inches from the gutter. Should I be concerned?

  • @johnorbase8635
    @johnorbase8635 Před 2 lety

    Salute

  • @MK_IDEA
    @MK_IDEA Před rokem

    Nice👍👍

  • @FreshBluntsNChronik
    @FreshBluntsNChronik Před 2 lety

    this Video has excellent. However, do you know of a good reference for installing this roofing on a hip roof?

    • @JeffCloudDesign
      @JeffCloudDesign Před 2 lety

      I just did it. It's not fun if you have any valleys that you have to cut angles on the sheets. You need a really good metal cutting blade. ( About $35 on Amazon) Otherwise it's the same install except the corners where the Hip meets the ridge of the roof.

    • @Phjghh
      @Phjghh Před rokem

      this Video has excellent. However, do you know of a good reference for installing this roofing on hip roof?

  • @michaelw.urbansr.8617
    @michaelw.urbansr.8617 Před rokem +1

    Are the stitch screw in the high spots of the panels ,actually suppose to screw into the wood or do they just catch the metal roofing panels and poly closure?

    • @st1ch3s38
      @st1ch3s38 Před rokem +1

      They catch the wood. Lengths of washer screws are normally 2.5 inches

    • @Jhintz81
      @Jhintz81 Před 9 měsíci

      Stitch screw are short and meant for metal to metal attachment

  • @wallypoly563
    @wallypoly563 Před 9 měsíci +1

    I can not find a video that shows in detail how to properly close a metal valley when a lower ridge runs into the slope of a higher perpendicular ridge roof section. The mystery is how to seal the very top where the valleys intersect.

  • @user-pj6mu4rv8b
    @user-pj6mu4rv8b Před rokem +1

    Если так делать, то крыша будет золотая.

  • @randallnelson6695
    @randallnelson6695 Před 2 lety +1

    That vent does not look like it lets much air out.
    Maybe folks on the west coast don't want vents.
    But here on the Gulf coast I do.

  • @satishrankhambe1970
    @satishrankhambe1970 Před rokem

    👌👌

  • @ADILKHAN-gh4xg
    @ADILKHAN-gh4xg Před 2 lety

    Nice

  • @rengeronig9695
    @rengeronig9695 Před rokem

    . . . at time stamped 00.01.32 . . . is it really correct to fasten down the sheet between the ribs . . . I dare to say to fasten the sheet on the ribs to strongly avoid leaks even though you seal each screw fastener . . . what do you say?

    • @idahopotato5837
      @idahopotato5837 Před rokem

      Everyone attaches in the valleys in the US. I have heard that in Canada you screw in the high spots. The roofs flex in the heat.

  • @pranotostb
    @pranotostb Před 2 lety

    Good teknik

  • @TheDaniloPerez
    @TheDaniloPerez Před 2 lety

    Wy to put the screws in the flat area.?.

  • @chinchisaaya9105
    @chinchisaaya9105 Před 2 lety +2

    Can you install this roof over your existing shingles roof? That’s what my contractors did, and I’m not sure if he was being lazy, or what.

    • @FreshBluntsNChronik
      @FreshBluntsNChronik Před 2 lety

      I’ve heard that that is fine. I can’t imagine. It makes much a difference, the only issue would be if you already had a roof sheathing issue that never got addressed and is now harder to repair

    • @RILEYLEIFSON_UTAH
      @RILEYLEIFSON_UTAH Před 2 lety

      Yeah, it's fine to do that. Like Raven☝🏻said...As long as the sheathing underneath is structurally sound. It also depends on how many layers of shingles you're laying on top of though. The only time it's ever been a problem for me, is on really old homes. I've seen when there's been literally 5-6 layers of shingles ON TOP of the original wood shakes that were used in 1918 when the home was built!😳
      It was 2" worth of shingles/shakes on top of the 3/4 x 6" plank they used back then, before plywood sheets were a thing.

  • @abelvidal7650
    @abelvidal7650 Před 2 lety +2

    Nice video
    What is the program you use to make this videos ?

    • @me-bs3mw
      @me-bs3mw Před 2 lety +1

      Me too I am searching for the program the use. Did you find it?

    • @abelvidal7650
      @abelvidal7650 Před 2 lety

      @@me-bs3mw no bro sorry

  • @tkx7
    @tkx7 Před rokem

    is gable flashing necessary for water prevention or is it just for aesthetics? I would like to have no gable flashing

    • @aidwilli
      @aidwilli Před rokem

      You could do drip edge along the gable. But you must trim the pan so that a ridge is not at the edge of the roof.

  • @user-hd5qw4sr7d
    @user-hd5qw4sr7d Před 3 lety

    Круто

  • @yamahakarthi7028
    @yamahakarthi7028 Před 3 lety

    Super 👌🏼👌🏼🦁🦁

  • @thewayidoit8895
    @thewayidoit8895 Před 7 měsíci

    They aure use a lot of butyl mastic tape. I don't see much of that used here in my part of New York State.

  • @thedrabfour
    @thedrabfour Před 3 lety

    A+

  • @chris-wf3ub
    @chris-wf3ub Před rokem +1

    👍🙂

  • @rampagoenekthuchannel...8088

    👍👍👍👍💯💯💯💯

  • @rudicoolrc7342
    @rudicoolrc7342 Před 2 lety

    ☝👍

  • @adanbolanos3444
    @adanbolanos3444 Před 8 měsíci

    Excelent

  • @davesmith7437
    @davesmith7437 Před rokem

    1inch screws are never long enough should be 2or2@1/2 inches I have a friend with a pole garage over time freeze and thaw and wind worked the ends of the panels loose and caused leaks we replaced the screws with longer ones to fix the problem just a thought

  • @pingpingchan4197
    @pingpingchan4197 Před rokem

    顺序,条理清晰✨🌟🔰📜

  • @gvozd_official
    @gvozd_official Před 3 lety

    Thenks

  • @davidrussell8795
    @davidrussell8795 Před rokem

    This diagram has you cut some metal off to fit inside the first piece of flashing,but then it says to put caulking on it, then slide it under the first piece! This is physically impossible to have the second peice slide under the first yet have the trimmed off peice fit inside the outside crimped edge!
    It would have to go on top of the first peice and caulking would be applied to the first peice of eves flashing!
    I was sold a system that costs me more,and another company just uses drip edge for the edging,same as for a shingles roof.
    The point is,if you watch different videos on how to install a steel roof,if your paying attention you should notice there's 2 ways to do it!
    A 3rd is just not bother with eves flashing and the hardware you don't need,as your evestrough covers most of the wood under the roof as well as metal or vinyl soffit put under the overhang !

  • @luismviera7982
    @luismviera7982 Před 2 lety

    where can i buy this roof? Thanks

  • @terrymcguire8476
    @terrymcguire8476 Před 2 lety +4

    It will leak like a sift with screws in the water valleys. Screws should be on the ribs.

    • @gabeakiki3878
      @gabeakiki3878 Před 2 lety

      Not so

    • @terrymcguire8476
      @terrymcguire8476 Před 2 lety

      @@gabeakiki3878 😳😆🤣

    • @MynameisChippyyy
      @MynameisChippyyy Před 2 lety +2

      @@terrymcguire8476 back when the washer wasn't neoprene this was a 100% right. Lots of manufacturers say on the flat (some say both) I personally do it on thr top

    • @tightbhole420
      @tightbhole420 Před rokem +1

      this isn't 1972 grandpa

  • @bigal25938
    @bigal25938 Před 10 měsíci

    No purlins?

  • @GHAFFARMD
    @GHAFFARMD Před 2 lety

    Good

  • @JusticeAlways
    @JusticeAlways Před 11 měsíci

    We tore down a 70 yr old commercial chicken house having a metal "5 V groove" metal roof. It had the old metal roof nails...all placed at the top of the V grooves...not in the valleys. The wooden structure was in remarkably good condition with no rotting. Placing fasteners in valleys is a no-no.
    I am wondering if an air gap underneath of approximately 3/4" would help cooling of the roof?

    • @jamesmatheson5115
      @jamesmatheson5115 Před 8 měsíci

      I agree with you, Im tired of seeing people fastening sheets as per this video, its just dumb.

    • @toast2437
      @toast2437 Před 2 měsíci

      @@jamesmatheson5115no it isnt

    • @jamesmatheson5115
      @jamesmatheson5115 Před 2 měsíci

      @@toast2437 Got no idea what your comment refers too.

    • @toast2437
      @toast2437 Před 2 měsíci

      @@jamesmatheson5115 sure you do.

    • @jamesmatheson5115
      @jamesmatheson5115 Před 2 měsíci +1

      Like I said earlier its dumb to fasten sheets in the valley, they will eventually leak, only in America does dumb sh!t like this happen.

  • @suhaibkhan798
    @suhaibkhan798 Před 3 lety

    V.good

  • @jamesmatheson5115
    @jamesmatheson5115 Před 8 měsíci

    Has me stuffed why they say to screw the sheets down in the valley and not the peak, the rubber washer under the screw heads dont last for ever and always some get damaged while the screw is being screwed down.

  • @vidyashankar6448
    @vidyashankar6448 Před 3 lety

    Flor products....which company... We have to contact???

  • @dacelooper
    @dacelooper Před rokem +1

    The uphill flashing install was very unclear. How does the panel magically go from a 120° bend to perfectly flat? 🤔🤔🤔

  • @tagminda4565
    @tagminda4565 Před 2 lety

    You got a wrong side of screwing loosening the sleeve jjoin.

  • @jorgejimenez7558
    @jorgejimenez7558 Před 2 lety

    In some point going to leak for sure.

  • @kingmorena6040
    @kingmorena6040 Před rokem +1

    ON THE ROOF PUT THE SCREWS ON THE IBR RIBS. ILL DIE ONE DAY I WONT BE HERE TO TEACH YOU

  • @cuarto5748
    @cuarto5748 Před rokem

    very durable roofing almost without maintenance, but seems too slippery and much difficult for gutter cleaning if going to roof

  • @jerrysponagle3881
    @jerrysponagle3881 Před 2 lety

    Thank you very much. Answered all my questions, to the point and no ego. 👍😎

  • @suelambert1466
    @suelambert1466 Před rokem

    If you are screwing right through, over time couldn't it leak at those screw holes.

    • @stewartsherriff2095
      @stewartsherriff2095 Před rokem

      Most definitely. I'm replying from Australia where we never screw through the tray or flat part of the sheet. It does not allow for expansion and contraction in the sheet and eventually the rubber washers give way and yes leak. Always screw through the rib. In all reality everything I see on so called metal roofing in the States is garbage. I confess there appears a lot to be desired in building practices in the US. Regards Stewart. 04-07-23

    • @toast2437
      @toast2437 Před 2 měsíci

      @@stewartsherriff2095your method is just BS cause it does not not Make sense at all

    • @stewartsherriff2095
      @stewartsherriff2095 Před 2 měsíci

      @@toast2437 That's because you haven't a clue about roofing or enough common sense to understand the correct procedures. It's not just my theory it's the theory of all major roofing manufacturers in Australia.

    • @toast2437
      @toast2437 Před 2 měsíci

      @@stewartsherriff2095 i do know roofing, and fair enough for your rules, but the reason why is lacking to me.

    • @stewartsherriff2095
      @stewartsherriff2095 Před 2 měsíci

      @@toast2437 Yeah Hi and thanks for your email. I can only suggest the theory of fixing through the ribs/crest of the sheet is to allow for expansion and contraction. Fixing through the pan does allow minimal expansion and contraction but this action wears the rubber washers away and creates leaks. Lysaghts possibly being the largest roofing manufacturer in the world have what they call "The Lysaghts Referee" which is a bible to all roofing products, fixtures etc. It's a small hand held type of dictionary and generally free from Lysaghts. Regards Stewart. 16-04-24

  • @wappz420
    @wappz420 Před 3 lety

    What kind off tape?